so just for someones info if you have trouble binding naze 32 to spektrum it is probably the firmware being too new for the old boards. clean flight 2.0.5 is the newest one that actually works how it is suppose to for a reversion 5 board. cheers
how much current does the sat receivers take is it 5v or 3,3V, could I run the new quad race receiver of the sat supply ? I don´t get why it´s not 5v and I don´t want to install a bec just for 3,3v
HELP! I cannot get this to work on my current build! I have done this before on naze rev 5 with success. I have done this on Naze rev6 with success. But I CANNOT GET IT TO WORK with Naze rev 6b authentic afroflight board - cleanflight 1.2.1 - betaflight 2.3.0. Using LemonRx diversity satellite receiver. Does anyone have any experience with this?
+quiljw01 I found rev6 buggy w/respect to specsat/lemon binding. I only use rev5's or flip32's with the built in specsat port right now. I basically Put rev6, 6b on the back burner for the moment. U can find lots of rev5 clones (mullet, armattan, and of course flip32)
+Toasta Mahogey thanks for reply. looking further into this I found that spek-sat-bind resets to zero on hard boot. maybe this is why? someone posted on Boris bflight and explained it as a betaflight issue but I was able to plug my sat into my r5 quad just to bind it and worked fine. if this is the only bug with r6b I guess I'm OK with it vs spending even more on new boards. no issues with my r6 yet. some people have problem with usb power feeding their ESC's to boot up but not me.
+protechnician83 thanks that's a good idea but I do have backup boards to bind worth but I want this feature on THIS board so I don't need to unplug in case it gets in bound just before a race for example.
+SuperTHEHALOMAN you have to go into your TX and re-map your sticks. Have cleanflight running so you can see the effects of your re-mapping. I've had to do that a few times on different quads.
Found this very helpful - only one piece missing for me - setting UART port 2 - RX parameter to Serial. Once I did that I was able to Serial-based receiver and have it "stick" - Thanks
+waytooslow Yea i copied directly from github but you are right.. it does not explicit state that. Making updates in my notes above.. thanks! glad it helped
