Welcome your opinions on MKS products. Makerbase was founded in 2014, specializing in 3D printing control systems and required accessories. Our products include various FDM / DLP control boards, mobile phone APP, cloud servers, and PC host software. Makerbase products have occupied about 20% of the global 3D printing control system market in recent years, accounting for the highest market share of similar products. As an innovative enterprise integrating R & D, production and sales, we welcome the opinions and suggestions of 3D printing control system from all over the world. We are happy to make improvements and innovations, and look forward to working with you to promote the development of the 3D printing industry.
I've got 2 issues with TMC 2209 and MKS DLC32. Need to know what configuration needs to be applied to avoid step motors jump steps. Someone who can copy&paste best config for nema 17 step motors?
28 дней назад
Hi, i'm trying to set my five TMC2209 (X,Y,Z1,E0 and Z2) to UART mode and i don't know in which pin i should connect the fith one (doesn't appear on this video). Can you tell me in which pin i have to connect the wire?
I'm trying to configure the vesc tool so that I can use a potentiometer on the adc2 input, so that it works as a pedal-assisted power regulator on my bike, I use an accelerator on adc1 and a common cadence sensor, but it is dangerous to use the assisted pedal if you are using a profile with a lot of power, my intention is not to need to use a smartphone to change the profiles but just a way to change the assistance...
I'd like to know how a NORMAL person who isn't a programmer is supposed to know how to navigate all this information. I just want to restore the factory settings that I screwed up when I tried to flash grblhal onto my MKS DLC32 V2.1 card for my homemade CNC table. Good lord this stuff is a nightmare. Why can't it just be a simple "click on this and upload it" type of situation? How can you expect a normal guy to understand all of this crapola - which is one link after another leading to more and more files and folders and 404 alerts for failed links. Why do you need three tools to do one job - and why do you need to see a million different files and folders when you just want to perform a basic task? Holy Crapoly.
Does your z Axis move when you adjust the "probe Z Offset" ? I have TinyBee and i cant get the Z axis to move to set the offset. I tried everything in this video. No joy Is there something about the board that wont let that work? Or does any one have a Marlin config where it actually works ? need for 3D Touch, Creality CR-10. I like the board. it be nice to get that to work.
I'd love to see how to connect this to an esp32. I am happy to see the MKS ESP32 FOC. I will start there, then maybe I will learn to program this board.
I bought a flsun q5 and the board had turned out to be complete junk ad 3 yrs ago now they never responded back to help or troubleshoot or replace. The board is taken out now and no longer works. The section for the ribbon insert no longer holds ribbon for screen.
the solution definetly isnt to set the maximum offset higher, but to level your bed.... if youre printing a part at like 150mm, youll have around 1.5mm skew in it in the Z, /=| where the | is the top layer and / is the bed....
Could you link to the text file you are using for this config? I've spent all day typing in commands from your videos - and I'm still not getting anything out of my ODrive Mini V1.0 board. The documentation just links to a page in Chinese, which google translate only partly translates into English. The Git Repository only has some of the files shown in videos. I could really do with some help getting this running! Perhaps you could work out how to use it with the ODrive Web Gui? That makes the setup easy.
Hi, is it compatible with MKS Robin Nano V3 motherboard? I have TMC2209 driver and simple Nema17 motors, and I would like to switch to closed loop motors.
ok, servo42D does support 1.8 degree steppers only. Also till its first calibrated the menu shows Cal, Mode, Exit in SR_vFOC mode. Also, the "MKS ServoD Control" Software does not work in Windows 10. Tried to re-compile, but the build Scripts are too old. I would have to down grade my Qt and all the build tools. Some of which won't work in my Windows 10. Probably can be compiled in UNIX, but I am not setup for this right now. Currently working with LDO-42STH48-2504AH for testing. Currently using CANable on COM3 for testing but know default Serial spec is available for the Windows 10. after messing with the Serial port settings in Cangaroo.exe this settings kind of work (Baud: 38400, Data bits: 8, Parity: None, Stop bits: 1, Flow Control: None). There appears to be more flavors of can out there then their stars in the sky. It would be helpful for the Firmware for the MKS SERVO42D Moter controller. I probably won't be able to build it, but it would be a Step in the right direction to get my printer firmware to control it across CAN Network. This is assuming i can reload the MKS SERVO42D Moter controller board. Anyway, that's it for now
i tried this on my 75200 but it does not work. even when i just put ad/dc15 wire directly to gnd nothing changes. cotroller is set to "control" software i set to always off .
I did everything as in the video instructions. Everything was successful. But on the next connection, the computer does not see the controller. Installed drivers. Tried on Windows 7 and 10. Nothing helped. Please help.
How come my sero42d does not have this menu. I only have calibration, mode and exit. Also canguroo , sometimes works for me on my windows 10 box. Any tech help is appreciated