Ive tried a different approach. Basically I have 3 subgroups. 1 for drums, 2 for instruments, and 3 for vocals. They all get dumped there into their respective subgroups and get some compression. Then they go into the LR. additionally, i have 3 mains that i use. 1 is the entire band which gets the peaks compressed, 2, a Main send used for spoken word mics and aux cables and such, then lastly 4 is my FB live send. My 3 subgroups then go to the FB Live, as well as the spoken word mics. Those mics get +5 dB
I know this is an older video… but with services beginning the same time every week, is there any way to auto click the “on air” button at the same time each week? Just wondering.
Our church purchased a Black Magic Presenter HD to stream directly to our channel on RU-vid. Our expectation was that we would be able to stream directly by pressing the On-air button. But unfortunately, we always have to plan in advance on RU-vid studio (create, go live, schedule stream, later, schedule stream, etc.) which is a comprehensive way of working. Because there are 2 church services taking place right after each other, there is not much time to do this. It's already too difficult for a lot of the team. Our previous streaming device did work that way. Nowhere can I find how this can be done with the Webpresenter HD. Do you have a solution that a simple push of the on-air button wil start the stream?
Yeah I’m not sure if there’s a way to do it directly from the WPHD.. but I’ve never tried to figure that out myself. We sent the encoder to to restream.io and from there restream will send it to FB and YT. We don’t need to configure anything in FB/YT before going live. The only thing we’ll do is change the description/title in restream. So when we go live on the WPHD, it automatically sends it to Fb/YT
@@ZachBrownMedia Thank you for that answer, because now I know I need to contact Black Magic Design. I thought there would be a simpel trick to solve this problem!
Thank you for sharing I just purchased the Hx stomp and plan to use it for church I also have the Bigsky that is for ambient when padding I just downloaded your patches hope to use them soon 🙏🏾☝🏾
I don't know what it is, but why are you killing the drums with gates and compressors and so much reverb? I bet they sound way better without. Go and stand behind the drummer, and listen to the set and how he wants it to sound and then go to the mixer and let them sound like they really do. Ever considered using Sub-Groups for mixing?
This might be a dumb question, but how do you have this setup, so that when the faders are moved at FOH … it doesn’t affect the Main2 livestream mix? We want our setup for FOH & Livestream to be completely separate. Thanks for your help.
I can highly recommend using subgroups to mix your show and adjust the volume on the PA system. For the livestream use a stereo matrix and just recreate the levels of the subgroups to that matrix. If you send the subgroups prefader to that matrix, the livestream mix is totally separate. And if you have to turn down let's say the guitar in the room, the guitar level will stay the same on the livestream matrix. Easy. Using subgroups will also make it easy, as you just have to deal with 5 or 6 faders for the whole band. Hope that helps.
Hey Zack , do you have a video breaking down the stream deck with the wing? I’ve been trying to figure out this past month how to get FX to only follow the lead singer like how you’re using it here
I put together a short video here that should help get you started: ru-vid.comHncTpJ7mB6Q I could also walk you through it over a zoom call: calendly.com/churchmediatraining/strategy-call
man....that pedal is amazing! unfortunately could not found it to buy in my country (brazil). i play a lot with my wife on sunday service. it could help a lot. one day i will find one.
Spent a few days at Crossroads Church in Cincinnati, working with their student department to create a library of training resources for their worship/media teams. Currently sifting through the hours of footage we captured, which will be organized into a custom Notion doc. This will hold all tutorials, resources, and SOPs for each team role. I’ve created a database of resources and custom training for my own church, which I’ve shared about on RU-vid. But it’s been a blast to implement this process at another church like Crossroads. We also had the opportunity to film a tech tour of Crossroads Oakley’s main auditorium, which I’m eager to share on YT here soon.
Using this template for my church, and I absolutely love it! It looks so much better than what it looked like before! I just wish I could find a way to show the current key and the next song key! 🤞 that'll be something PP adds to an update!
These are so helpful - we are a very small church with only a few volunteers and AV being a key area. So grateful for this video and the Notion resource - will use to populate our task/how to list *GRATEFUL*
@@r3ggysam524 that connection is made over a network. Could be just an Ethernet cable running from the board to the computer! But we have a network connecting all of our computers, switcher, and board. We also have a WiFi router connected to it so we can access mixing station from our phones/tablets too if we’re connected to that WiFi