Hi, we have a project and we need to program the thruster like Speed and time (different speed and different time segments), Can we do that? what are the options?
The Fathom Tether is used in conjunction with the Fathom-X Tether Interface Boards, which provide a robust, high-speed, long-distance Ethernet connection over a single pair of wires.
Hi, as mentioned below, the Fathom Tether is used in conjunction with the Fathom-X Tether Interface Boards, which provide a robust, high-speed, long-distance Ethernet connection over a single pair of wires.
Lol the Thruster T500 is an Australian designed and built Ultralight aircraft…. I guess your generation have lost the ability to have an imagination to create something new. 😂
great idea... but $320 for just the expansion board :) keep at Blue robotics, make it cheaper, and for non-blue applications, and maybe you could become the new standard architecture for bigger fpvs... ?
@@hobielim9797 The 3-pin connectors on the potentiometers are reversible, so if turning a knob runs the motors the wrong way, the connector can be reversed to correct the problem.
Hi there, the tube and the flange each have a half-circle shape around the circumference that line up to form a circular channel. There's a slot that allows you to insert a plastic cord into that channel. The cord blocks the tube and flange from being separated. You can see this around 1:30.
I Have a question about values you passed in function map() Why did you pass ,0,1023,1100,1900 i mean why these values and is these values can be determine by brushless motor kv or by esc because if i have different motor and different esc how can i put a values are compitable with mine
Hi there! We used 0-1023 as the input range because that is the range measured by the potentiometer with the analogRead function. We used 1100-1900 as the output range because that is the signal range that the ESC accepts as a valid signal. These values should work for the vast majority of ESCs!
I am working with a missionary group. We have a need to modify the location stored in the return to home function to a new location in the flight computer I was wondering if you know, if this can be done with your drone control card.
@@SK-bl1lp lol yeah i have i was messing with ya but it is super reliable and a great upgrade from the pixhawk. The raspberry pi and the navigator are more organized and much more efficient. It was worth it for our underwater robot
Hi Alan, level winders are awesome! We were doing our best to keep the cost low on this one and most of the time you're winding it by hand and it's easy enough to guide the tether with your other hand.
Awesome! Definitely a new and big marvel of marine engineering. I'm curious, with the latest version of the heavily configured BlueROV2, how many gadgets/accessories (gripper, imaging sonar, etc.) can one Electronics Enclosure support?
I need to buy the Micron Gemini 300m - S12683 to install in the BlueROV2. The Tritech's Technical ask me the following question: "The tail is fitted with an Impulse MKS(W)-307 connector at one end that connects to the Sonar and the other end will need to be terminated by you with a connector that mates with your vehicle". I need instructions regarding the tip that will be installed on the ROV. Thank you in advance.
Hi Thiago, you'd have to put a WetLink Penetrator on the other end of the cable, add an Ethernet switch to the ROV, and figure out how to connect the wires inside to the Ethernet Switch. I'd recommend reaching out to our team right now about this as we may have a smoother solution for you soon that's worth waiting for.
Hi, We have had leaking problems in our BlueROV, It was working well reaching 90m depth. However, it almost droped three times but the leaking sensor worked at time. First at 40m depth, more less, and we didn't know what happened. Secondtime at 23 m depth and we saw a crack on the electronics dome, we changed it because we thougth that this was the reason, however, we also saw water at pressure sensor (inner side). The last time, it was over 23m depth, and we saw water again in the inner side of pressure sensor. We think that here could be the leaking, I don't see the bar 30 pressures sensor at your online store, is the same we have. Was there any problem with this sensor or why is not anymore at store?