@@texascottonfarmer Happy to help! Thank you! It was so much that I felt like I needed to get it down. My post on Yesterday's Tractors has a bunch of info about troubleshooting the hydraulic system and some pages from the manual and stuff.
@@caaaabot I have a MF 231, the hydraulic lift system is similar to yours. But the auxiliary hydraulics are connected at the access plate on top of the stand pipe. I need to change the hydraulic fluid in my tractor, but I'm afraid of what I'll find in the bottom of the case. 🤣🤣😂😂
@@texascottonfarmer Is that the set up where one position on the valve lets the 3-point function normally? I was looking at some pictures of different set ups on the 200 series just now but have only worked on and really researched 100 series. You can easily drain and refill the oil like a normal oil change by removing the drain plugs and refilling through the port by the shifters on top of the transmission. You really need to pop the top cover to get the safety wire redone if you want to change the filter screen. I'm not sure if you can physically get to it through the non PTO side cover.
@@caaaabot I do not have the auxiliary hydraulic connection on my tractor, but have investigated the possibility of installing one. (I just know how and where it attaches.) My tractor (supposedly) has a filter screen accessible through the PTO side cover on the left side of the transmission case. Thanks again for the info.
@@Jlinwoodjackson Thanks, bud! It's been gone for a while. I put whatever I think I might need for a project in these now because I've way exceeded their capacity.
In my discussion of how the pump works, I misspoke. That first hole I point at is how it mounts in the tractor. It's not a port. It obviously intakes through the filter screen. 🤦🏻♂️🤦🏻♂️🤦🏻♂️ I misspelled auxiliary twice in the on screen text.
I didn't set it up with a battery on the trailer. I learned a lot doing this project. I would like to move the tail lights, add markers, a winch, and possibly a brake away kit at some point. Thanks for commenting.
I am currently suffering from MFF or something exactly like it. I don't dab or wax or anything. I used a brand new "Pax" brand vaporizer and developed the symptoms about 20 hours later. Been in bed for two days with a high fever, muscle weakness, headache, etc. It's very distinct from any cold or flu, the rawness in the throat is totally different from a sore throat. I returned it to the shop because it tasted funny to me, but haven't told them what happened to me yet. Please, do not buy these Pax brand vapes, even for flower alone. It's a very serious thing to go through.
I was in a drug rehab with a fat hillbilly that was fixing the owners riding lawn mower, the deck has a guge rust hole and a split in it, and he was using the most random things he could find in the halfway house and a cheap welder from harbor freight that somebody had lent them really quickly and he made a mess and got really sick and burned a guys hand and three people ended up in the hospital from metal fever i presume. I left before he got back from the hospitol. I knew it was a bad idea to use Chinese made wrenches, silverware, old fan blades from an old attic roof vent, and they even cut a piece of metal off of a few frying pans and were trying to weld the bottom to the cast iron pan onto the deck and a wal mart cheap teflon coated pan too. I was appaled at the lack of consideration for their health. I knew about the idea of metal fever but I wasnt completely sure because frankly i dont need to know. I wont he welding unless a pro is beside me to help. I yhink certain metals are done with tig welding and with different temps and gases and materials (roda) to my knowledge but that is all i know and so i need to know. I have been tempres to buy a harbor freight welder and go at it a few times but each time i think i need one i find a way to not need one. Life is jot that hard. Just call a friend to tack weld that one thing every few years and you are fine. I recently had to drill a hole and use a metal tapoing screw and devise an elebrate way of attaching a fan spring to the housing of a through the wall fan with a spring loaded door that pops out and turns on when the fan opens and turns off when the fan door is shut. I managed without the welder.
Yeah... The mower deck is mild steel. You need a similar metal to patch it with. Better if it's also a similar thickness. Everything you listed is made out of something different. Haha. That'll never work unless maybe you braze it.
I thought your dog had a leg stuck in the garage door but just wasn’t saying anything out of embarrassment 😂😂😂😂 Other then that great idea on the power cord. But the dog stole the show for me 😂
Oh, interesting. The dude who got it is a native speaker of whatever language that is. I would guess that he primarily reads and writes in English, however. He translated it as, "fate plays with man."
@@caaaabot it's russian language. I'm a Ukrainian, and i can speak russian fluently. And seems this guy translated not really correctly (My English not perfect too). As far as I know, this tattoo doesn't mean that he's criminal. Interesting fact: Since 90's or earlier in prison any prisoner can get tattoo, even if he didn't deserve to have. Other prisoners, who have a tattoo (deserved) might ignore, but some might punish (depends of prison). Tattoo now doesn't have a sense now
@mcshadow2339 This guy was born in Ukraine. His parents came here when he was young. He is not a criminal. He is a US Marine. He gave me the text and a picture from a book on Russian prison tattoos. He probably has written and spoken English in his daily life since childhood but spoke Russian or Ukrainian at home. I always tell people that text in a language other than English is just an image to me, and they're responsible for knowing what it says. Thank you for sharing!!
That’s very wrong, some people use it for medical reasons. Sorry you don’t understand that. and most people do care what they stick in they’re body. Unless they are a degenerate. Thanks for the informal video !
Stainless spatulas are the dab tools that real smokers use.. did you order that shit from dh gate or get sold by the hippy idiot at your local smoke shop?
@@mcshadow2339 maybe in US or west, but not in Russia, or in Georgia, you can't make the vory v zakone stars (otritsala) on your chest, and many other tattoos, you have to earn it and be authorized to be tattooed , I know it because I'm a woman with vor v zakone star and it's quite rare so men often come to me and ask questions about it
@@thatguy7683 who cares,voir v zakone are not only in "gulag", they're in Europe, america too... he could have problem just in the street for that. I think ppl are not stupid and will understand that he didn't know the law, but sure they will say something or maybe laugh too
A Ukrainian immigrant who is now a US Marine came to get tattooed. He brought in a picture Russian prison tattoo for reference with that text. It says, "Time plays with you."
Wire loom and grommets exist for a reason. Those square holes you have that wire ran in front of all loose like are for the locking mechanism. Even if you don't want or need to lock you're toolbox they still need clearance for the drawer to shut and open. Getting a wire caught or Rubbed through in that hole is a good way to electrify that box or get the drawers stuck closed. Those cable chains that toolbox power drawers have along the side are not all that expensive to buy or 3d print, and they will save you a lot of headache latter.
But it will be necessary to cut the drawer and make a panel to protect the cable chain. This guy doesn't say anything about any problem after installation but i think you are right about getting somehow the cable torn in time
That's interesting that U.S. general included those holes on the side. When I saw this cart at HF, I didn't like how boxed-in the pry/breaker-bar section was. Seems like it would be really hard to pull things out of there if they fell in.
Funny you said that. I dropped a small head breaker bar in through the top hole and had to use a very strong magnet to try and line it up and fish it out.
@@caaaabot with a D(Д) instead of a L(Л) it's like "Destiny plays with human" . If you look at the letters, I think I know what happened : Д and Л looks the same for a non speaker OR when he printed it, it ripped the lowest part of the letter, OR he copied from a guy old tattoo where ink was not clear
