How goes it all?! On this channel, I fix various/random things and attempt to show you how I did it. Please note that I am in no way a professional and anything you learn here, you repeat at your own risk! I'm a big advocate for Right to Repair and hope that you are too! We should all be able to repair the products we buy, if we choose so! Happy viewing
It iS the instructions I needed but the video isn't very clear as to WhaT he DiD at aLL ..! Very disorienting .. ! But as English iS the Only language I know.. I'll just try to go by what the dude is Saying & 🤞🏽 hope it all goes well 😅
I have the thing you said you're missing but it says the same thing water flow interrupted and I picked the thing up and set it back down and it goes back to normal so not for sure what's wrong with mine
@@thijsvandewouw2934 Oh it's definitely dangerous, that's why I put a disclaimer on the video and restricted it for 18+ but, I've used it like this for years now and haven't had any issues!
This was very helpful. I want to add a comment about the float. I had just refilled the water tank for the first time and needed to set the float back in place, but I didn't put the float in the correct position as there is a wrong side and a right side. Make sure your float is facing the right direction when you put the float back in or it will keep telling you to refill the water as it is not sensing the float.
Awe man. That’s awesome. I knew those locks had something to do with it. But it stopped when shutting. I could hear my dad’s voice, “Don’t force it”! So I looked it up. Ez peezy
I'm not sure if there's a problem with the board or another AC issue but the AC will go off but instead of just the AC light going off the button for where the air blows goes off and also the recirculation button and that makes no sense if it's an AC issue because it should just be the AC button goes off not every single one of them. Also pressure on high and low side check normal.
Great tutorial. My only problem was the replacement unit had the plastic film on the interior and I had to disassemble the frame to remove the film. Just a minor inconvenience but time consuming.
I was cleaning the oven, so I took the door off, but when I did this, the hinges sprang open. I now can't get them back in the correct position without having super human strength. I ended up taking the door apart, so I could work on them without potentially shattering the glass door itself, but that hasn't helped with the strength part! Do you have any advice on how to fix these? Thanks!
I have a four year old basic black GE stove with electric burners that they put in apartments (it was brand new when I moved in). The hinges on mine are the same as yours. I went to my oven and gave this a try and I was able to lift the door off just enough to see that this will work. I was just testing this for tomorrow when I plan to wipe the last traces of Easy Off out of the interior. Having the door out of the way will make that job much easier! Did most of that job forgetting that the door could be removed. I knew I could find a RU-vid video telling how to do it. It took a little searching to find a video where the door hinges were the same as mine. I got a little nervous like other posters when I thought I was having trouble getting the just slightly disengaged door back into place, but I did it. Thank your for your easy to understand tutorial!
Had the same issue as the comments below and could not believe how simple it was to resolve the issue on account of your video. Thank you!!!! Thank you!!!
is there a video that shows you how to break this door down and replace the middle glass? I replaced it but door is a little out of aligned and just want to make sure its done right. thank you!
Can't say for sure on Fass or Air Dog, as I'm not familiar with the plug end they use & I don't know the physical parameters of their lift pumps either. All I know for sure is that it works for Fleece's pumps!