Hello me and my friend are building a completely modded out x box 360 slim even though their a decade old but loved that vid about installing that internal hard driv
@@c_marquez Do you need that silly case? Can't you just plug the HDD in just like that? Right deep into the slots with your hand? I just bought myself a 250GB one. No XBOX case around it but. F going OFFICIAL XBOX HDD route ahaha
Does toughbook cf-19 have a fan? If not, would it be possible to add a fan inside? I noticed that mine tends to feel hotter compared to normal laptops.
It did not come with a fan. Adding one is a good question, but I'm not sure how you could add one, not much room in them. Let me know if you find any further info on that.
I want to replace the touchscreen of this on a CF-W8, or just take its motherboard and put it on the T8. Do you think it's possible? Not sure what's wrong, but they r both not working. Long story short is it possible to remove the whole panel, or the whole monitor with hinges and everything? First stage of the mission failed, I need new screwdrivers
lately I noticed my cf-10 is generating a lot of heat even at idle. I tried to blow it with compressed air doesn't seem to help a lot. Any suggestions? Thank you sir.
I've never had a cf-10 so I'm not sure about that model. I typically make sure the fan is turning on as it heats up, replace thermal paste, and make sure all dust is cleaned out of my machines. If there is no fan, then I would check all the thermal pads and make sure the sensor cables are in good shape.
Just got a replacement for my CF-18NHH85BM and as it turns out it's probably the driver board that went on mine 😅, any thoughts on where I could aquire one?
For anyone trying this in 2022 this works if you have a 360 e as well, just pluck the old hard drive from either the FAT model or the or arcade and your good to go!
Another question: I've tried to put a m.2 NVME on the slot next the wifi card but the OS didn't showed the SSD, do you know the function for this slot? Thanks again!
Thanks for your video, The service manual from HP is really bad and doesn´t helped much. You are very clear in your video. Do you know how this kind of HD and connector is called and if is possible to replace it with an SSD version? Anyway, thanks again!
The HD is 1.8" ZIF drive: www.ebay.com/itm/184277193893?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=u4qfo9a5sme&sssrc=2349624&ssuid=cssxbjvaqfu&var=&widget_ver=artemis&media=COPY There is an SSD ZIF option for sale on eBay but I'm not sure of the quality. SSD ZIF Option: www.ebay.com/itm/334044303495?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ohra_vs_rng&sssrc=2349624&ssuid=cssxbjvaqfu&var=&widget_ver=artemis&media=COPY There's a chance you could also find them on Amazon.
You don't want to try fixing it yourself? It should be the same process shown in the video. If you'd like to discuss this send me an email, channel name at gmail. The part is running around $35 - $40 on eBay. Depending on your location shipping may be expensive, and I would have to include the shipping back in the price I charge for the repair. I would honestly recommend trying it out and if you start and feel like you don't want to continue, I can help you out.
I'm not sure since I have mine setup in my garage and I get a low signal upstairs. To be fair, I'm in an older home with plaster walls so the signal would suck no matter what router I had out there. I first tested it in the home and had good speeds, but I don't have gigabit service.
It does need an internet connection, so you would need to connect it to a router. I have it hardwired to my Gateway as the wifi signal isn't strong enough for a stable connection.
Typically I look at the stylus pen to determine if it's passive or active. Passive will work with a plastic stylus pen, the active will work with the pen that has a button, if you hover an active panel the cursor will move without touching it. If you have a pen you can hopefully use that to look for a replacement panel for that MK6.
It's a MK8. I work with CF19s at work and those have 2 slots for RAM. The refurb CF19 I just bought has a camera and unfortunately it looks like the camera takes up 1 ram slot. That's pretty lame. I'm suspecting there's nothing I can do to add a second RAM stick.
I don't have an answer to your question. I have not had my hands on an mk8. Unfortunately it's been years since I've bought broken machines to fix. I want to get back into it but my full-time job doesn't allow for that free time. I'll see if I can find an mk8 at a reasonable price (broken) to try it.
I forgot my account email and password and my Xbox broke long time ago but I kept the hard drive would I still be able to get my account back by putting my hard drive in a new xbox 360 slim ?
I'm not sure that putting your hard drive on a new Xbox 360 will recover your account. I would suggest recovering it, but it my be difficult without the email.
Can't say that I have. I've heard of the systems having the red ring issue but not after installing a hard drive. Is this something that's happened to you?
@@chicosuave2966 gotcha. I just looked up the red light codes and there is a code for hardware failure, guess that could be it. Q4 (bottom right light) = hardware failure. Q1, Q3, and Q4 light up when a general hardware failure occurs.
At the time I paid for a 300Mbps plan. Before installing this access point, the WiFi signal was weak in the garage, which got me the 12Mbps speed. Setting the access point in the garage the wifi signal was a lot stronger, which allows me to get closer to what I'm paying. Just recently upgraded to 600Mbps plan so I'll have to run another speed test out there.
I appreciate it. I haven't had the time to record much. I have a PS5 side plate swap I did a month ago but that's it for now. What would you be interested in seeing?