I have the same problem on my 2020 Si Coupe. I'm really hoping it's nothing serious as I know it's very expensive for a new clutch. Hopefully this solves the problem. Thanks for the video. I'll give this a try.
If following this video doesn’t work - as lubricating the springs and other surfaces didn’t work for me. It’s specifically the piston that is attached to the floor of the footwell that needs lubing. It helps to remove the two sensor switches to gain better access. But you just need to spray in where the threaded part disappears into the piston. This video explains this a bit more clearly ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-s4JSdCTyxfg.html
It's not from the hair. It's just a low quality product with a childish engineering. I brought one today and from the first turn-on that brush didn't work. I turned it on/off a few times and magically started running, but not for long... Then while testing it the brush stopped again. It is just a bad product.
Lol I'm going nuts trying to figure out why the brush won't spin anymore and it's a stupid grey button next to the power button! ☀️ shinningfloor.com/ ☀️
i tried this on my 06 clk 500 and it made latch solid but still wont close.. any ideas how to check front door assembly to see if thats the issue? thanks
*Overall 5 stars as it's exactly what we wanted,🧼 **allabout.wiki/Dyson-Upright** in terms of cleaning power. Suction is as good as all the reviews state. When we first got it, I first vacuumed with the existing vacuum and then with this, the additional fine dirt that was in the Dyson was gross and convinced me we needed this. We have medium length carpet and a terrier - no issues, I do imagine plush carpets would not work well with this. Also a little too powerful for most bathroom rugs. Great for area **rugs.One** con is the hose, it's great for reaching far away places (ceiling), but is frustrating and hard to use if you're within arm's distance (think couch and floorboards). This is due to the design of the hose having this long metal rod for extension. Also, I haven't figured out how to get the hose back together quickly as it's supposed to nest into the base of the vacuum. This piece might just be user error though.Canister is just like all others, still have to take out the middle insert to get all the dirt out. I often make a mess around the trash as I'm trying to empty it, but the suction picks that right back up.*
Do not use WD 40 - this is to anuyone posting here. Use as author, a white teflon/lithium spray grease for such purposes. WD can be dangerous for all gaskets etc + it collects the dirt very easilly. The grease used on video here opposite -- is not attracting dirt and dust.
Hello I just scanned a CLK350 2006 and after clearing old codes that dealt with the CAN / TRANSMISSION communication that said they were stored but old.. the dash in the center and radio is stuck with "DIAGNOSIS" showing. Can you please tell me how to get this off or reset? Thanks a million!!!!!
I was just about to order yet another roller head. It would not spin. I know about cleaning the roller. The small black thing that spins the roller would not spin.This fixed it! Thank you.
I was about to rip mine apart for the 3rd time (either that or drive over it with the tractor!) and finally thought I would come to youtube. Boom..... within 3 minutes my damn Dyson is fixed! I can't believe I missed thinking about the connectors. Thanks for the video. Cheers! Now to find someone around here to vacuum!
My vacuum is very clean and it still would not spin after taking it to bits; so I took it to bits again and removed the brush head motor and noticed that the cogs which spin the motor (located inside the black stick) were dry. Sprayed with WD40 and it works like new.
Mine wouldn’t latch. Took it to the dealer who without hesitation said - u need a new door. $678 Plus $150 Install. I laughed and left. I came home found your video and fixed it myself. A little glue and some patience and it’s good as new. Thank you very very much 🙏😀👍
when you pull the handle to unlock what part suppose to move? I think my actually lock is broken as it stays in the locked position when i pull the handle. So I have to use a flat blade and manually about to get it to the unlocked ready to latch position. Anyone else have this problem?
Hello Mine is still not working, i checked the 2 connection thinkgs i cleaned them but not working.the brush is not spinning!! Please help!! I have to mention that last time i washed it with water under the sink, i charged it and the battery is fine but the brush not spinning