the 3 possible positions for placing hall sensors for an 8-pole alternator is every 15 degrees, or every 30 degrees, or every 60 degrees exactly. Depending on the chosen position, it generates a different code sequence. But in all these positions they generate 6 codes for the module
You need to make sure that when the pole aligns with each of the six combinations of the phases it generates a different code. Example: +u-v = 011 -v+w = 010 +w-u = 110 -u+v = 100 +v-w = 101 -w+u = 001 You also need to make sure that the string of wires, usually yellow, green and blue are in the same sequence as the wires of the sensors
i have a chance. Its reduction is still small, the motor needs to apply too much force to start then the protection of the controller stops the operation.
Ordentlich Entlüften. Steht die Therme auf dem Dach ist das Entlüften immer problematisch. Dann Wasserdruck auf 2Bar stellen. Fehlercode 2 Temperatur Fehler. Wenn alle Heizkörper geschlossen sind ist der Temperaturunterschied zu klein zwischen Vor und Rücklauf. Das ist wohl eine Macke dieser Gerate