Your first mistake when you drilled them holes in the side of your bucket was that you use the regular steel bit you need to use a cone bit it looks like an ice cream cone not a steel bit back to the video whenever you’re digging with a small compact tractor such as a 2380 or 2360 you always without a doubt wanna be in turtle gear and you wanna be in four-wheel-drive for the best results when digging just thought you’d like to know the machine is remarkable for the price of ityou take care of it and it’ll take care of you abuse, it it will do nothing
Like the content For changing the oil I would recommend installing a Fumoto drain valve on the oil pan easier and cleaner when changing the oil The part number is F104N is what I installed on my Ram
Problem: you still have a matter of filtration. Although the fleece pump is excellent you’re going to have to rely on the original filter or you’re gonna have to put some other water filtration/separator on. I’m not sure about the year of your truck, but the original or OEM filter is actually not bad, however once you start pushing a higher psi of from the lift pump (which I would recommend for all diesel trucks) You can technically push water through 5 µm. This was a good video. And you did a great job of explaining what to do. I just worry about the filtration along with separating water.
It might be a bit late to mention this, but even though that bar is made of a material that is allegedly better than AR500, that's still a wear item, and I usually tell friends looking at getting one to consider getting a style of bar that has replaceable teeth. I'd say the same thing, even if it was made of Hardox. For future reference. Also for future reference... Kubota is actually a pretty good tractor, and a good value. At least up until Tier-IV. I am less impressed with the stuff coming out from the mid-teens forward. That said, a BX is kind of a light tractor for that work. I'd want a minimum of a 3100 or 3500 Grand L series. A 4070 would be a great choice for that, especially if you pick up pre-owned one that was well maintained, but from the 2000's, though maybe the mid-teens. I have a friend who bought some of my stuff when I closed my business, and he has an MX series that he really likes. I gotta admit, if I were going to get a "Last Tractor" for general property work, I'd likely go for an MX5,200 or a Grand L60. 4wd of course. I sold a Grand L 3560 a few years ago, and that was a pretty good tractor for it's purpose. Didn't like the regen nonsense, or HST transmission. I like the GST much more. Anyway... Good luck with the clearing.
9:37 to show what could be 2 minutes. Thank God for fast forward! Did you say why the bolt holes are oval? That's so if you mount it right, you can pull the teeth out and flip them up inside the bucket upside down. I have a different tooth bar but the dealer told me to mount it like you did, that the bar when flipped up is just a pain in the butt.
Playing with big toys gets real easy to get carried away. The bigger the toy the more fun it is. I used to get so carried away with my dozer, when clearing our land, that it would be dark before I stopped. I could barely see my way to my truck. Good Luck, Rick
Lmao ! The bucket blade IS replaceable , just takes a real farmer or welder to replace it ... and a wider knife aka blade is far harder to dig with , your making that lil engine work twice as hard .
they have more edge surface then a factory bolt on cutting edge and that take more horse power. Don't believe me ? Just think about it or better yet research it .
Every single kabota I have used has had serious problems. They are great when new if maintained perfectly and kept undercover. But they don’t hold up. Have you seen any “Classic Kabota Clubs”-
Such a GREAT "Stip-Mineing" Vidio. Just Think YOU "Tortured " that little tinker-toy to DEATH. Thank you Sir for the Excelent vidio and happy safe tractoring. Best wishes with all your endeavours.
Great job and love the attachment on the bucket.. Try out the Hougen Magdrill HMD 130 It is short and compact.. Easy drilling up to 1" thick.. Be sure and get the case of cutters to go with it. You will love your investment & E.Z. metal drilling jobs ! + The the Drill set is made right here in the 🇺🇸USA🇺🇸 I also have the HMD 917 Will drill up to 3" Kind of pricey But let's pay a little more to keep our jobs here at home plus we get better quality.. 💯🇺🇸❤️🇺🇸❤️🇺🇸💯 🇺🇸Go Trump🇺🇸 🇺🇸MAGA🇺🇸 *"AMEN"* !!! 😎
I know im late to the party, fog lights go off because of state laws that don't allow any other forward facing lights with high beams on, check laws in your area.
Put a parana bar on my Branson, best attachment ever I’ve been cutting trails through Forrest and it will cut through 2” and smaller trees. Bigger stuff I can usually pull out if I can get a bite in it. It will also shear off tree limbs on cedar trees really quick 👍👍 I found it’s great for digging but if I’m grading dirt or gravel it’s useless so I take it off and use the factory edge
