I have one like this what motor I can use to make it electric sewing machine?

I have this exact model. I'm trying to trouble shoot why the knee lever isn't working. I have it plugged in and connected correctly. Light turns on when plugged in but im still not able to get it to run. Any tips ??

Sound like the Joker

Week that was useless

The motor has nothing to do with forming the stitches. You’re problem is in the machine. Tension and timing.

You talk on and on and on and on….

Okayyy. How did they look after the restoration?

I have a Singer 211G156 that I bought used in 1970. It's been a faithful workhorse all these years, in the upholstery business. Is there any way to tell the age of the machine? It was old when I bought it.

Have same machine ,its nobbin has jammed ,wont go round

Is this available? I'd love to buy

$500 for a $50 machine? Seriously?

No sewing machines were being made during the war. This shows up in 1947 earliest.

You can take the clutch off these older machines, deglaze the cork clutch plate with a copper wire brush and lightly sand the flywheel. Put it back together and it will go as slow as you like.

I have error code E2 -F2- on my gas stove / oven. How can I get it back to normal? The oven will not work now.

Where did you buy a Rock Solid 2 car kit for $180.00? That’s the price of a 1 car kit!

Thank you so very much! This helped me and my father so much! Thank you again!

Video is 6 years old and still sucked.

did you ever sell it? it is a nice machine you just needed a few lessons on how to use it.

Not too bad that time, #4 was like a scene out of a horror movie 😂😂

Ouch brother maybe you should have your doctor do it, I don't plan on pinning my quads only delts and glutes. But dang you made this look really painful 😂😂

DUDE!!! Learn that or u will die

Very nice if just got a machine exactly like yours except for the table smaller and different

I have a '66 Deluxe with that bone/off white color interior, do you know any businesses that sell 1st gen door panels & chrome pieces? Or all if that has to be hunted down on the internet? Thanx

never touch the needle to the skin multiple times like that bud risking infection. I'm on 1 ml a week. I use 29, 1/2 inch gauge insulin syringes and do 4 shots a week .25 ml in my shoulders (alternating shoulders) my testosterone levels is always between a 1000 and 1200 its painless. when you get your new bottle pull the syringe back all the way and inject 1ml of air into the bottle to pressurize it. After that before you draw your medication each time inject .50 ml of air to keep it pressurized. it's a really good comfortable way to inject. it draws slow maybe 1 min tops.

I guess you get what you pay for? But even a licenced contractor will do crappy work so you need referrals at least #4 , this guy acting like he's perfect, not good.

Liquid soap with the hot water also helps.

𝐩𝐫𝐨𝐦𝐨𝐬𝐦 🔥

You might try your delts. I find the quad is a little more painful than the delt.

How much is it selling for?

I'm having this problem right now except the pressure is way worse😩

Would this be considered a walking foot machine?

are they the walking foot

with every thing that you have for them that work

also how much you asking for 3 of them

am looking for a walking foot can you ship it

That looked brutal man....I recently found out I have low T and have began TRT at home. Need to use a 24/25 g and 5/8" for the tigh buddy...

nice!

Have you noticed any effect yet?

I've tried to get my doc to prescribe TRT injections from home. All he gives me is the topical stuff you apply to the shoulders. It does virtually nothing

Stand back and give us some steady shots of the entire exterior. Thanks!

I was just watching a video on the 2023 Genesis G90 and its mega plethora of tech and gadgetry. Growing up with luxury cars from the 60s I wanted to remind myself of the differences. To my mind the luxury from a Toronado was all anyone really needs. The only thing the '66 lacks is disc brakes.

You've got a big project ahead but the car is definitely worth restoring.

Thanks! I know a few things - enough to do some remodeling, including converting copper to Pex in my laundry room re-do. But I did not know about the shut-off on the meter! A furnace upgrade with side vent left me unable to easily get to the whole house shut-off, which is not good. It looks just like your setup. Now I am going to hang an old crescent wrench next to my meter shut-off so it is ready in an instant. And show my family where it is and how to use it in case of emergency.

Worked like a charm I didn't know the stove had a sencer that shuts off when the grease hits the burner

You can use cotton too??I m thinking of getting one they are very expensive Know even the used ones .

Very easy to assemble.

I would suggest trying to inject in the deltoid with an insulin syringe, so 27 or 31 gauge needle, half an inch. Absolutely painless

I advertise on Craigslist but i only get 1 job out of like 20 calls.....Most craigslist customers are cheap as hell! They always want to haggle and say they found someone cheaper lol I have no sympathy for cheap customers. You get what you pay for. Pay premium price for a licensed and insured contractor with good reviews, referrals and job pictures/videos. If you shop based on price, this may happen.

Rip headphone users

True