Welcome to my channel/hobby! I like to post videos that can help you out! Some videos are reviews, others maybe life hacks to make things easier. I do have a fascination with LEDs and cars. But I equally love electronics. So, whatever I can afford or get my hands on, I’ll try to make a video!
Thanks for checking me out, and Don’t forget to SUBSCRIBE!!!
Send me an email if you have a product you want me to try out! wowmr.3@gmail.com
Hopefully someone can help me I have one of these speakers and it shows to be paired to something but it's not my phone and I can't find a factory reset on it I did read word said hold the power button twice and it would disconnect but that's not working help if you can
I personally would've liked to hear actual instruments and raw vocals, then I'd get a better idea of how it replicates sound, like acoustic guitar, piano, real drums and stripped down vocals
I do the 3m buffing pad wiith flitz or mothers, and any type of wax sealer, it last for about a year or more, then I do them again, only takes like 3 or 4 minutes per light, then done, no sanding and all those sanding steps.
Have you had any heat issues with the decoder damaging the cables you zipped tied them too? I thought the idea was to try and suspend the decoder with zip ties in the engine bay as the decoder gets very hot whilst in use. Let me know how you went
Well it does say it was tested on a motorcycle tire. But I use thin performance tires on my car so itll still fill fast. Bigger tires like yours seems obvious it will take longer
I have been looking for something for my pool filter, this looks good. But how much chemical this has? I see you are not using plastic glove when handling it.
Hi! So this filter cleaner doesn't use strong acids/chemicals like chlorine. So it was safe for me to handle, and I didn't have any reaction to it. But good point! With any solution, one should wear gloves. Here are the contents listed on the bottle: D.I.Water (CAS # 7732-18-5) Pentasodium Taphosphate (CAS:#7758-294) Tripropylene Glycol Methyl Ether (CAS # 25498-49-1) Surfactant Mixture (Proprietary) Fragrance Hope that helps!
I ordered this 2-3 days ago and it arrived today. I tested it out, the noise isolator personally really ruins the quality of the overall sound, from the voice, bass, treble almost everything (heavily the bass). I tried it without the isolator though there is a small buzzing or just small noise without the isolator, the sound quality is almost as good as the proper AUX cable straight from your phone to the car. In my case the straight aux from phone to car doesn't have any noise and the audio quality is insanely good, the only reason I got this was due to Bluetooth connectivity cause since I'm on a newer iPhone I can't charge and use an aux cable at the same time so this could let me charge my phone and listen to music via Bluetooth but it's for sure not as good specially while using the isolator. If you don't mind the small noise without the isolator which tbh you kind of don't even notice while listening to songs then I guess it's worth it. (I just tested it for 5-10 minutes gonna further test it in a bit)
Hi, yes I do have DRLs and they work great! My CRV uses a 9003-type bulb, so the high-beam strip of LEDs is on during the day at a lesser intensity. Works the same as the OEM/ filament bulb.
I would install both of them to be on the safe side. You also may have a loose connection somewhere if that doesn't resolve your issue. Hope you figured it out! Sorry about the late response.
nice video man! so is this means too that the DRL is drawing more power, maybe 30w? (say without the decoder is drawing 15watts) or still the same as the wattage of the LED bulb
Great Video! Especially about the Inducer Motor revving up and down like it was struggling. Question - How did you clear the nest out of the pipe? Did you have to disassemble it? Did you use a vacuum, or put a leaf blower in it from the inside somehow?
Thank you! Glad you found it helpful!! I used a shop vacuum to clear out the nest from the outside. Just removed the exterior pipe cover and my vacuum's hose had the same diameter as the pipe. So it worked like a dream! Apologies for the delay in response.
Thanks for the video. I watched a few other "reviews" and not one of them did they actually use the compressor or even then it on. So thanks again for sharing your experience.
No, I inflated 8 tires on one charge and still had juice left over. Not sure where you got the $140??? Maybe you watched a different video 🤷♂️ Best of luck finding the product you like!
I have had my inducer chip a blade due to some kid throwing a rock into the outside vent. Also I've had it fill with water due to the drain clogging. No rodent issues yet... Knock on wood.
@@bv2999 the inducer fan filled with water. It has a drain system since it can get water coming inside, but in my case the drain system got clogged. I called a tech out because the inducer fan was gurgling but it was ultimately an easy fix-- he disconnected the drain and blew out the clog. Not a waste of money though because he inspected and found some other issues which I ended up getting replacement components for and fixed myself.
Start one side completely like you did, then do a 1/4 of the other side then grab a small hook tool and start at the 3 o’clock position while holding the other side and slide hook tool slowly from 3 o’clock to 6 o’clock and it should work. May take a couple tries to get it but not bad if u don’t have these pliers.
So I've been using the bird seed used in this video for a few weeks now, but for some god damn reason they keep getting into my bird feeder! It's really frustrating because the bird feeder is screwed into a tree and I can't really find or use any obstacles to deter them. I really don't want to resort to going down the path of treating them as pests, but I'm running out of options.
My 48 v did the same thing, I boughtit used so no warranty but, there is a switch bypass that I can try but if that doesn't work I'm back to shoveling uggh!!
That's rough without the warranty. Did the bypass switch work? If not, check the batteries. I have two sets and somehow switching the batteries did reset something on my replacement one. Because the same thing happened with heavy wet snow the machine cuts out and acts dead.
