Just picked up a 2011 for a good deal only 400 for parts is a good deal if you ask me. I will probably do body work and paint match myself just has to function not look great 😅
I’m having the same issue on mine except I’ve already had the starter replaced and it’s doing the same thing. Took it to one mechanic and they never could figure it out. I’m gonna try and take it to another and tell them to look at the grounds. I can’t get it started to get it up on ramps to look for the grounds and I don’t want to Jack it up in my gravel driveway.
@@jkeener600 lol! It’s called a spark plug gap gage set. Look up what gap should be and use the same size gap gage run it in the gap and you should feel drag. If it doesn’t go in or it’s to loose bend the electrode until it goes in with drag.
i just bought this same truck today and it’s just as bad as yours i was wondering since you live in MA do you know any good guy that can fix that for me the rest of the body is in perfect shape except that area is really bad
Most shops won’t touch rust repair. 1) The rust always comes back 2) The repairs are so expensive it doesn’t make sense on a 12 year old truck. I would attempt to fix it yourself.
I have a 2006 Prowler as well. Mine is Red. I had all the same issues that you did. I just had the top end rebuilt, trans rebuilt, and I had to straighten the passenger side front end as well. I also installed a winch. All in all, it's not the best brand of UTV's out there, but when it runs, it's a friggin tank! I live in northern Michigan and I've never had a problem driving in the woods deer hunting or pushing snow with it. your video's on the Prowler were awesome. I'm going to take some of your ideas and put them to use on mine.
what are the chances my 2015 mini Cooper has this pump cause everything you described I have been chasing for three months and well I am still locked up drivers side front caliper we will find out 2day most of all I wanna say thank you very much you and your video have given me a little light at the end of this tunnel call my car before I watched your video I wanna say I didn't give up I was pausing and reflecting for a while cuz at times this problem was affecting my life negatively thank you again I am going after lt again needless to the brake Gods have been kicking my ass but you have given hope Terry young
@@RCBGarage I did replaced it all except rotors but my rere ass put the pad on wrong bunny ears on the pad goes on inside of caliber flat pad on outside. I fixed it I'm an idiot. Rushing
I have a question my grandson chain come off and broke the left side of his crankcase part of the gearshift lip and part of the casing. Oil ran out of it can i change the left side of the casing without take the motor out or the top end off
My grandson chain come of and broken the crankcase right below the shifter. Do i half to take the top end all off the change the left side case on a Kawasaki 400 kfx
Hello, could you give me the exact measurements of all the bearings and seals? I have a quadricycle like this here in Brazil, but no parts of this quadricycle can be found here.
Hey man great video! I know it’s been a couple years since you’ve posted but just wondering if you recommend replacing the rear lines too? I changed the front 2 rubber brake lines and it seemed to fix the issue for a bit but the famous screeching and brake staying engaged has returned only after driving for about 20-30min. Do you think it’s the pump?
You do not have to remove the lower control arm on that Dodge Dart I have been working on vehicles for 42 years you do not have to remove the lower control arm there is an easier way using a pry bar and an exhaust clamp too Pride down off of the lower ball joint
I have a 2014 Dodge Dart SXT and it has been a great car for the most part! The Dart was rushed to the market prematurely due to the 9 speed automatic transmission not being available as it was in the original 2012 Dodge Dart designs! To get the Dodge Dart on the market quicker FCA used a 6 speed auto 6F24 transmission from Hyundai in lieu of the 9 speed auto!
Thanks for the video, my cable broke too. If you don't mind ne asking, what lift do you have & where did you get it? I have a low ceiling garage & that kind of lift would work great for me. Thanks.
