Three passions joined in one instructive channel! Lots of handy Nissan Qashqai J11 (2014-...) DIY tutorials to simply improve your car! & Creative and easy smarthome videos! & Videos of our exotic garden in a North European climate (Belgium)
For more info on exotic gardening please visite my website: palmvrienden.net/lapalmeraie
First of all, thank you for the big work that you did. I appreciate it. Hats off to you 🤠 I would like to ask about your car battery and the parking mode on camera, have you ever found a problem to run your car after turning parking mode on ? Because I'm afraid of this point !
Thank you! 🙏 no, it will turn off way before the car battery runs out off the power needed for a clean start. The protection kicks in at 11.8V already. So more chance that it won’t record the whole night rather than it runs down your battery. I’m in Marocco right now and had to leave my car in the European airport parking. I turned if timelapse mode to save as much battery in order to have to longest parking surveillance as possible. It saved me very recently. I posted a video about it 😉
@@LaPalmeraie0032 are you in Tangier right now or planning to visit it, it's gonna be a good opportunity to meet you and get a live experiment 😜 Morocco is my country, Tangier my hometown where i live, if you need any help or tour in my city you're welcome
Sometimes this is because your installation has leakage. This means that there is still a slight amount of power coming through. Not enough to light a light bulb but enough to light LED diodes, often the red ones. You should figure out how to stop this leakage. Maybe by changing the wall plug? Putting a smart plug between is also an option. Not to operate your LED light strip or to have to do a double action every time but there are models that cut the power off completely as soon as the output drops below a certain level. I think the Meross smart plug do have this option but check my dedicated video on smart plugs to be sure. 😉 it also allows you to set automations or scenes which operate the LED strip and the plug
Подскажите пожалуйста Ниссан кашкай j11 2016 перестала работать навигация на штатной магнитоле! Купил новую sd карту, поставил . Начала работать , а на утро тоже перестала . Пишет пишет нужна новая sd карта что делать???
Это ненормально. Карты спутниковой навигации работают неопределенное время. Я думаю, что это была копия, а не оригинальная sd-карта, и, предположительно, что-то пошло не так, и поэтому карта больше не признается официальной картой nissan. Я бы связался с продавцом и обсудил возможные варианты.
Hi! Not really that much. It has a low battery protection so when the voltage drops bellow 11.8V the time-lapse recording stops. Which is still more than enough power to start the car.
Hello. I have the A200 and how do we know the parking surveillance is ON? Does it say 'Enter Parking Surveillance Mode' when OFF engine or the green light stays ON?
@@LaPalmeraie0032 do you mean to check for the voltage of the fuse? I'm not sure because I went for help at a local car workshop to install it. So does it mean it needs to have a specific voltage in order for the parking surveillance to work?
@fernandomilee2870 a published a new video last monday which is just the hardwire part that is also included in this video. The hardwire kit has three cables. The ground (black) wire, that should simple be connected to a metal part of the car. The continuous / + (red - not sure by heart) that should be connect to a fuse that stays live all the time. And the switched / acc (yellow - not sure by heart) that should be connected to a fuse that is switched. This means it only gets power when the car gets unlocked. This is something you can check quite easily with a multimeter but a carshop should be able to understand this and wire it correctly. Check in the dash cam menu, IF parking surveillance is available, the hardwire kit is connected properly. Otherwise you wouldn’t be able to enter this menu. Also check your « auto power off after.. » this should be set to OFF. And then all is set up correctly. Of course the battery should have enough charge. Mine didn’t stay live for a really long time until I charged the battery with an external charger. The parking surveillance remained live every whole night after that.
Do you have it as well? I found it more than OK for the purpose. I even use footage in 1080P holiday videos and it works great. If you really need 4K footage, go for the A810 model instead but you must be willing to pay the price that goes with it as well.
@@LaPalmeraie0032 No I don't, but thankfully we have this video to see that the video level is far far behind of any today. You can be satisfied, but the image is really behind the time.
@writenamehere0000 well… if you want to turn a 4k movie this entry level dash cam won’t be for you. If you just seek some evidence of an impact, it will do without doubt. It saved me recently with a parking surveillance video. But hey… live and let live 😉
Hi! It’s the same principle but you should add a switch inside in order to turn it on/off manually. Find yourself a suitable camera and cheap screen and check my channel for the video on how to wire from under the bonnet to the cabin and the one on how to add a toggle switch. 😉
@@r4k4210 Cierto, pero el USB-A no lo es. El cable es USB-A. Cuando se utiliza el kit de hardwire, también no hay ningún problema e incluso tiene características adicionales.
I'm sorry about the damage, a few years ago I too was forced to change the bumper and the wheel arch cover due to a rear-end collision, doing the job myself I spent 1800 euros. If it wasn't for the dashcam I don't think they would have compensated me.
Good question. What I read on the FAQ’s is this: you can use the internal sensor to control the temperature and the external sensor to do the floor overheating protection(optional). Or you can use the external sensor to control the temperature, at which point it will no longer be used for floor overheat protection detection. This sensor option function is supported by Meross app.
Thank you very much my friend it help a lot, now i know that the headlights i changed to the original EU LED are working as it should and they cannot fail my TüV. Thank you very much again and i wish you all the best.
@HerrKatzen hi! No no, I state in the video as well that these are the original light units. It’s impossible the change halogen units to LED because not only the connections are different, the leveling is also done by the board computer where for the halogen it is done by the turn button on the dashboard and the screws under the bonnet on each unit 😉
Hello , i find very usefull your videos thanks for that, i would really appreciate if you could do a video on your biled headlights, when stationary , if you turn right , your right headlight moves with the stearing wheel to the right and if when you turn left your Left headlight projector will move to the left when turning stationary, the reason im asking is i have a UK car that im taking to Germany and the TüV made me change the headlights to EU LED ones i did , but now they are claiming the left headlight is not making that moviment . Thank you any help would be apreciated.
Hello, thanks for good videos! How can I get android auto to work on my Nissan Qashqai J11 2021. Right now its only Carplay 🤔 Is it possible couldn't find any good answers online. Thanks!!
Hi! Make the difference between open & closed (like when going through the doorway) and locked & unlocked like when leaving home. The Nuki can lock and unlock the door but isn’t aware of the position of the door. This means that you can open your door but still will be able to lock it. With the door sensor you will know if the door is closed as well and the Nuki will lock when the door is closed. In the app you can see all these statuses. The « open door » feature is something else. This will unlock your door but hold the key for a moment so the door pops open. I made a dedicated video on this subject 😉
Merci pour ton retour ! Le capteur d'ouverture de porte permet-il de configurer le verrouillage automatique de la porte dès que celle-ci se ferme ? J'y pense notamment lorsque l'on ferme la porte pour sortir de chez soit afin d'éviter d'oublier d'avoir à verrouiller depuis le keypad
Non car ça serait embêtant si la porte se verrouille tout le temps dès que la porte est fermée mais pour cet effet il y le « lock and go » où on appuie deux fois sur le Nuki et qu’il verrouille la porte dès qu’elle est fermée soit à l’aide du « geofencing » où la porte se verrouille dès que vous vous éloignez de la maison (et vice versa).
Merci pour ta réponse ! Je m'interrogeais sur cette possibilité dans le cadre de la location saisonnière de manière à ce que lorsque les clients quittent l'appartement celui-ci puisse se verrouiller sans manœuvre manuelle de leur part et éviter les oublis. Connaîtrais tu des solutions ? @@LaPalmeraie0032
It stays on in my car, except when the voltage drops under 11.8V I think. Are you sure you’re using a continuous power source? Does the battery has enough charge?
Привет! Здесь часть 1 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qDQgJRec6Ak.htmlsi=GNBSDsfOyaRVPrQX и часть 2 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f4FhKRsiDa4.htmlsi=8FWHwhHNR-VfcWsa
Thank you so much. It is although it’s in the town center! It’s still early in the season so stay tuned for the updates when there’s more color, more volume etc 😉
Hi, I’m not sure what you mean by lock the video. Where did you saw this in the video/app. I guess it’s a function the protect the existing (full) clip from being over written.
I've got a 43 inch tv and I'm wondering if instead of trimming if I can just wrap it around a 2nd time? Also would the camera and control box work with any other nano leaf leds if I got them separate?
It needs to detect the 4 corners in order to show the correct colors according to the displayed image. When wrapping around the strip a second time you won’t be able to indicate the corners correctly and the shown colors would be a mess. The brightness would be another thing. I had to trim a bit of the strip and still a never use more than 50% brightness. The 4D works with the lines and shapes so I guess that it should work with only the control box and camera but you won’t be able to calibrate the corners.
Hey op 0:53 seconde heeft u het over de power sockey. Bedoeld u hiermee de zogenoemde sigaretten aansluitingen in de armsteun en het bakje van de midden console onder de navigatie ? Deze twee werken bij mij niet namelijk vandaar de vraag
Hallo! De power socket is de sigarettenaansteker onder de airco unit. De cig_lighter is diegene in de armsteun (omgekeerd zou logischer zijn natuurlijk). Wel opvallend dat beide niet meer werken aangezien ze apart afgezekerd zijn. Even beide zekeringen checken dus; De cig_lighter zit op nummer 15, de derde van rechts boven aan. Bij de Qashqai’s van na 2017 (met de rechthoekige mistlampen) zit rechts ernaast op nummer 16 dus de power socket. Op de eerdere modellen (met ronde mistlampen) zit deze eronder op poort 32. Indien ze allebei zijn doorgebrand best even nagaan of er geen 12v apparaat werd ingeplugd dat kortsluiting veroorzaakt.
You should use a fuse that is free or not critical in the first place and that can have one more device added up to it as well. Which fuse that is, depends on your car of course. A min 10A fuse would be best.
¡Hola! ¿No, nunca? Utilicé varias cámaras de tablero y diferentes tarjetas SD y nunca tuve problemas, excepto una vez que la tarjeta no fue reconocida. Esto se resolvió formateando la tarjeta.
Bonjour, merci beaucoup pour ta vidéo. Elle m’a beaucoup aidé. Quand j’ai enlevé la protection, j’ai constaté que l’annonce était plutôt sèche il semblait pourri. Au mois d’avril quand j’ai tiré sur la lance, elle était bien attachée, j’ai fait un petit trait, comme tu l’as suggéré, j’ai constaté qu’il grandissait. Or il y a trois jours j’ai été le voir et j’ai vu que Lens en tirant dessus me sont restés dans la main. Ma question est la suivante : crois-tu qu’il soit mort ou peut-il survivre ? As-tu des conseils pour moi ? Merci beaucoup
@1010RamSes d’accord. Combien il a fait au minimum cet hiver chez vous et est-ce que vous l’avez protégé (et si oui comment)? Question d’être sûr qu’il s’agit d’un filifera… vous pouvez m’envoyer une photo? Le filifera est plutôt rare 😉
@@LaPalmeraie0032 oui je te comprend, c’est bien un filifera, il y’a une différence avec un robusta. Il n’a pas fait très froid, -7, mais on l’a protégé tous l’hiver de novembre à mars, et je pense que c’est ça l’erreur, lorsque j’ai enlevé le voile, il y’avait de la pourriture sur la lance. Comme de la poussière, et la lance du milieu avait un peu de vert à la base mais sinon toute cramé. Pour voir si il était mort j’ai fait un trait sur les deux lances et les traits ce sont décalé donc une croissance. Mais il y’a 3 jours la lance est venu dans ma main. Voilà tu sais tout. Merci