My niece is dealing with the same issue. Water was shut off while they were out of town and came home late at night. They paid the bill, but it’s been two days and no one has come to turn it back on.
@@SnailHammer it’s a terrible business practice. I bought a valve key on Amazon. If they do it again, just use this key and turn it back on at the valve in your yard. Here you go: a.co/d/3zQMFHz
Can't hurt! The plastic housing is all that is touched during the process, so there really isn't any contact with the bulb, so hand oils don't really have a play here. But never hurts to wrap it! ;-)
Good job, computer guy! I would have benefitted from knowing the benefits of the Reme-Halo device in your opening, along with comparisons in sizes of replacement bulbs if they are available. You done good, rookie!
Haha! Thanks! I figured anyone seeking a replacement how-to video, already knows the benefits since they are already using the device and need to replace the bulb. Appreciate the comment!
If any of you are business owners, Entrepreneurs, or Leaders....or you just love stories about business and technology, with beer tasting in between.....check out my podcast Nerds on Tap here: www.youtube.com/@NerdsOnTapPodcast
I learned a new joke today. How many HVAC technicians does it take to screw in a light bulb? One, if you give them $432. I just ordered my $190 replacement bulb off Amazon. Thanks for the great video!
You forgot to mention the step where you set the lamp output based on the square footage of your residence. You find the set screw loosen, then close down the baffle enclosure that surrounds the lamp to block the lamp more or less tighten the set screw. If you're not blocking enough, you'll smell a prominent ozone smell (like bleach), you will experience excessive dry coughing, and dry nasals needing saline mist. It will hurt your sinuses and lungs if prolonged exposure IMHO, this all from someone who learned the hard way. We've had ours for over 8 years, you want to smell just a faint smell of ozone. You will not "Know " if it's working, you will see and feel and see it working. If you have pets, keep your filters changed and watch how the dander drops to the floor. Not so much floating in the air. If you have allergies, notice if your eyes water as much, do you sneeze as much, etc. ? You will not get sick as much, at least we haven't, no sinus infections or allergies like we has. Even with two 100+ lb German Shepherd's in the house. Some will need to adjust the bulbs baffle to open up more. Once you find the right position, write it in permanent marker on the housing so you'll have it moving forward.
I was wondering if air is to pass through the small slots running down the left and right side of my Halo? The air isn't coming from the seals and was wondering if you had the same air flowing through the REME HALO. Thanks for the Video.
Thanks for the video. My question is, the red light... does it stay on continuously? my HVAC guys said that it, the red light, only comes on when the fan is on
Great video, super easy to follow and understand. My question is, did you leave your output in the wide open position? Is there anything that says it should be adjusted to a lower CFM position? I’m also going to question my hvac people on why they installed it on the intake side when there is a good place to install after the air handler. I had it installed at the same time my new Bryant heat pump was installed.
Thanks for the feedback Todd! Yes, I put it in the wide open position. It ships that way, but the original installers had the old bulb installed wide open, which was my reference point. I found this manual that explains output levels, which might be helpful: www.manualslib.com/manual/873880/Rgf-Reme-Halo.html?page=7 I also replace the bulb every 2 years, as recommended. Yeah, seems to me you would want it after the handler. Makes more sense! Don't forget to check out my other channel if you want to learn about tech and cyber security: ru-vid.com
Yeah, a proper system you want a simple bulb in the apex of your evaporator, followed much further downstream by the Reme in the main trunk before your conditioned air spiders out to the registers. That’s how all the high end homes are done. Good HVAC technicians are like gold.
@gwyoung3509 the best place to go is page 6 "REME HALO™ Output Adjustment" hvac-parts-online.com/product_extra_files/REME-Halo-Manual-Jan-2015.pdf I am not able to upload a picture of the page, maybe the video author could with credit.
Hey all! I'm looking forward to making more videos for this channel in the future, but I do update my other channel every week. Be sure to check out my primary channel here: ru-vid.com
Hi Tim, we just installed our new bulb and questioned the red light. We thought when it was origianlly installed it was green. Other than that, when we had our unit installed 2 years ago the air had a noticible clean smell and it's now day 2 and I honestly can say I do not smell anything different. I'm wondering since you installing your bulb you can comment on how long it took to know the bulb was working properly and if you ever questioned the red light. Thank you for your time.
Hey! I researched it, and according to what I found, the only purpose of the LED is to show it's powered on. The LED color, according to what I found, doesn't matter. For instance, mine never had a green light even when it was originally installed by the tech a few years ago. It was always red. As for the smell, I noticed a major smell difference when the original installation happened. When I replaced it in this video, I noticed a much less smell difference, probably because the environment was already conditioned for the technology. Thanks for your inquiry. I hope this helps.
My Reme halo was just installed 3 months ago and the indicator light keeps going out. I unplugged the power cord and waited a minute, plug it back in. The red light comes back on, but shortly after plugging it back in the light goes off. What could be wrong with this unit being so new? Thank you.
That LED light should stay on. How long after you plug it in does it go out? You may have a faulty transformer, or loose connection for the plug. Or there may be something bigger at play here. I would check those first before removing the unit. Thanks!
I watched this a couple of time. Tim appears to extremely detailed and precise. He communicates and instructs in an excellent matter. Hate-Off for this guy for doing this. Of course I subscribed. Thanks. -awd-
Thank you! I will be sure to do more of these types of videos if and when I repair things around the house. The issue is when I do the repairs, in many cases, I'm just trying to get them done, and forget to film them! I just repaired a freezer and a clothes dryer and of course, didn't film them. ;-)
I’m sorry to bother but the red indicator light on my reme halo just turned off. If I unplug it for a bit it comes back on but then turns off. Think I need to replace the bulb or the whole thing ? Thanks In advance
I'm not an expert, just a DIY'er, but I'm pretty sure it could be the bulb or the ballast. If it's the latter, you'll want to consult with a Professional.
@@unclegowron7262 I’m sorry just saw this but I found out they hadn’t connected my ground for my unit Correctly. I rewired my unit with good ground and that fixed it. Also replaced the bulb
This is from the FAQ's on their site: My REME HALO® has a RED or GREEN light lamp indicator. What does that mean? The indicator light on the REME HALO® was changed from green to red in November of 2017. The light simply indicates that the unit is powered. If the light is on, whether the color is green OR red, your unit is receiving power.
I had one installed few year ago with a new A/C. Where do I find the Reme unit. My A/C unit is on the roof of my house, would this be in the attic or on the roof next to the A/C unit?
This is totally not the correct information your not supposed to use the silver tape on the reme cover at all as per RGF and also rgf needs to make sure the right information is out there also what if the company that did your installation went out of business what then?
Nice job thanks, I’m going to do mine, I cringe every time I have to call an electrician or plumber because there’s no cap on costs, anywhere I can save 50% It’s a big whoopee, no offense to the great technicians out there, glad you’re there, ....
I don't think so Tim, you've messed up here, as per our directions Do NOT tape the head on you WILL short out the ion generator and destroy the REME. the seal is ONLY for the base. Also any RGF products that you purchased online have NO warranty whatsoever. Please refer to our website and if your unit has not failed as of yet please go back and cut the aluminum tape off the head. Joe Jordan RGF technical support manager
Hi Joe. Appreciate the comment. If that's the case, then you should discuss that with the AC companies that are selling your products. This is exactly how they installed it. Aluminum tape around the head. I put it in exactly how it was already installed by one of your certified installers. Thanks again. PM me and I can give you their info.
Hey Joe, thanks for the comment. All I did was copy what the installer did when they originally installed the unit. Very reputable company that sells a ton of these in our area. I'll call them to discuss your comment, of course. I'd love to hear from other home owners that have had a reputable company install one of these in their home to see if they put tape on the head unit. This is great information and thanks for your comment. The unit I purchased online came in a factory sealed box and had all of the manufacturer info on it and even said to call the manufacturer with a phone # included, if I had issues with the installation or the bulb.
@@geebo47 this conversation just made my decision. No way I’ll be purchasing one. I got what I was after, I was skeptical to begin with that it even lives up to the claims but now it’s clearly even more complex. I’ve seen these people wiring to the eac and doing all sorts of shit wrong. What y’all should do is have “approved installers” but not doing so has allowed your product to be installed all across the country improperly and lead to customers not finding value.
First, thanks for the time and effort to produce the video. I installed my REME HALO unit a couple of years ago and just did the cell replacement. I was following your nicely-done video until encountering the sealing part. Joe is absolutely right. It isn't his fault that the contractor who did not follow instructions. The unit installation instructions are very, very clear and straightforward - even for a basic handy person like me. Only the base is taped. The head simply twists off for cell replacements.