DISCLAIMER: My videos are here as an inspiration and to share some of my ideas. Do not attempt to do what I do in my videos. Ensure you have undergone training by a certified instructor before attempting any operations demonstrated in the videos.
I may earn a small commission from the Amazon Affiliates program via links to any products or services from this channel. Your purchase helps support my work in producing new videos for this channel.
When you click on links to various merchants on this channel and make a purchase, this can result in this channel earning a commission at no extra cost to yourself.
I have a NEWAIR CIGAR HUMIDOR 100c that needs a PC board. Manufacturer said I have to replace the board but they don't make replacement parts for this unit so now I'm stuck with a paper weight...smh if you can help me I'll appreciate it.
Thank you very much for your help. My Cuisinart wine cooler had exactly the same outcome after replacing both MosFETs and input capacitors. Similar board. 12V output was low, around 4-5V and I was thinking that the DC cooling thermocouple was bad because when I disconnected it, 12V were normal. I replaced all rest electrolytic capacitors, two 47μF/50V were low and now it is working fine.
One question please, I have bought a car for my son and I changed the motors, I put in higher revs. my problem is that it works for 15 seconds and then it turns off by itself and turns on after 5 seconds. this happens constantly. it had a 12v battery 4.5Ah and I put a new 12v 9Ah one but it still does the same thing. Do you know what the problem is? Can you help me?
Thanks for your input and pointing me in the direction to start looking. My Power watt 3000 fires up in about two seconds goes into protection mode. ever since I’ve had it when I would hook up the power to the batteries there would be an arc from the capacitors charging up. I thought that was normal because it always did it now up and goes into protection. Thanks for your input. Have a good day.
3yr old video and it helped more than most of the others I've found so far. Thank for this. My cable protector wore out my cable right where it ends and now I know enough to fix it better than approximately 2m 54s ago lol. Thank you!
Found a power wheels in the dumpster did not have battery nor charger I ended up clipping the connector off and hooked up a motorcycle battery and it works perfectly fine I can charge the motorcycle battery with my motorcycle battery charger thank you for the insight on the in-line fuse I totally ignored the fact about an in-line fuse my mistake but luckily no mistakes has happened yet and I can still do that
We work on a nightmerish wall Never saw anything like this The wall is filled with Styrofoam You drill it for like 5 seconds and then you fall in to the wall with the drill We are supposed to put cement boards up So we need to drill holes for the rails we screw the boards to but this ish is constantly failing with this empty A wall
