Really wanna wake that Ole where up dress her with a semi skip chain on that 28" bar, anything longer you run full skip as it'll clean much faster and retain high chain speed. Full comp I believe cuts just as fast if not faster than semi or full skip but the less cutters will be easily noticeable in the real hard-hardwoods we cut
Your learning, and doing good. Might want to get some Head / Face protection. And some Chaps. Sounded like your chain was a little hungry. Try not taking down the rakers so much for felling. Maybe try a skip tooth chain. Be safe so you can keep making your videos. Good job identifying your mistakes. And correcting them.
I was always taught this pattern for the road: 1st, 2nd, 3rd, TA forward and then fourth. Then to slow down with full gravity wagons I was told: 4th to 3rd then hold the clutch and go to 2nd or 1st but hold the clutch and let the weight to slow down then clutch out in 2nd, then first and when your in first slowing down pull the TA back. And without a load you just do that but use the gears and throttle to slow down, and NEVER use the TA to slow down, and make sure you throttle down when up shifting to avoid stress on the gears from the torque especially with the TA foward
Draft is nothing to do with light or heavy equipment When pulling plow can set lever say in-between light heavy...when hit hard ground...will automatically pick up on arms a touch so tractor can pull it..the draft senses the pull....and keep front end of tractor from raising off ground
Nice work young man! Word to the wise; Chaps, double ep’s and for all that is holy let off the throttle when coming out of the wood or that saw is gonna write it’s name on you. Muffler sounds great and you got that saw singing though. Be safe!
I have one exactly the same . Bought in 1984. Farmed all ground with it. Now it’s not big enough for the acres I have now!it’s handy for light work....filter is a restriction gauge for the air filter. If air filter is plugged it goes towards red!!!
You're a great guy dude, thanks a bunch for sharing 👍🏿! IHC rocks!!! The utmost reliable ones and guaranteed most wanted tractors at auctions to date deserving the highest bid The only issue I got is oil and hydraulic fluid leakage and corrosion. Anyway you guys are taking great care about this beauty out there! Stay safe and God 🙌🏿
@@jacobiceps9452 yes and No there are a Lot of Jobs where you can have fixed rpm but for example while turning at the end of the field a Gas Pedal is advantageous also you ned to get to the field somehow and I don't know about the us but in Germany you need to drive along public roads a lot to do that
@@nalley6815 in germany it's not that way our roads have more tight spots and Speedlimits and crossways where a gas pedal is useful. Also tractors are often used to pull trailers as far as i know u guys use trucks for that right? So yeah in germany it really makes sense
I made do with what I had before I had a tripod 🤷♂️. I have one now so future videos won’t be like that. It’s pretty self explanatory if you think about, you’re just using the grinder to sharpen and keep a consistent angle on the blade, an angle that is similar to the factory edge. Yes it would’ve made more sense if people could actually see what I was doing but it is also fairly self explanatory. If you have any questions let me know I’d be happy to answer them.
Finally a person who understands it doesn’t take $300 worth of sharpening tools to get the job done. I use the same simple tools as you do and I get great results just using my hand grinder, flap disc and balancer.
Yeah I ran it for a couple minutes without the deflector just because I had just finished it, and it started melting some of the plastic on the saw 😬😂 so I went ahead and threw it on and have had no issues since. I’ve thought about going for the lighter saws but I really like the power that the bigger saws have.
factory is big not should be opened up slightly n new deflector but hes on the right track! Can always take small amounts away , cant put material back.
Take your chain stop handle off and put you something kinda cool there like either an old small piston or even a box wrench . You get what I'm saying I think . You can customize and or color that saw like anything else.