Who in the hell ever thought you needed to remove the fuel tank? Lift the back seat take off the wheel and a plastic cover..... they are ao obviously accessible its astonishing this was actually a question. Truely astinishing. Arenyou one of those guys that hate forgien cars and ignore the fact they are so much easier to work on than a domestic? Im just hinestly confused this was even a ?.
There are some reasons to remove the tank, rusted lines and whatnot. I don't hate foreign cars, I have a supra and it's decent to work on really. My domestic truck is a pain. Thanks for watching
Approximately 20" from then punch weld to the floor. My floor sags a little right there. I believe I kinda pushed the transmission off the jack to get it out from under the car though.
Hi I just discovered your channel. Are your calipers the 330mm or 345mm? I just purchased the Mercedes s500-s600 345mm calipers to upgrade my mk3 Supra front brakes but I’m not sure what rotors to buy? Thank you
There is another RU-vid video that has the 345 mm caliper, and he says that for the 345mm you use the 2004 ml500 rotos, I recently got the 345 mm caliper but haven't buy the rotos yet, hope this helps you ✌🏻
They're weddsport sa55m Reps. The originals retail around $400 a rim I believe. The reps are....well reps. They work but will crack. I have 3 actual Weds sa55m and they're made tough. I believe they're flow formed and not cast if my research was correct.
@@suprachefgarage9845 okay I ask a question bro what size of tires you recommend me .. do u think 245/40/18 front and 255/35/18 rear looks good ??? Help
@@suprachefgarage9845 see bro 2 years ago I have 20" inch wheels 20x8.5 front with tires 235/35/20 and rear 20x10 with tires 275/30/20. I think don't rub of fender . Right now I have 245/40/18 . I don't know if I use of 255's. Rear and 245/40/18 front. Or 245/40/18 rear / and 235/40/18 front.
I have a 2006 chevy equinox I put different headlight bulbs in it and now I have no daytime running lights or a heater. I have checked all fuses and relays they r all good. What do I need to change now
I picked this out of the forums for you. It's a start Welcome to the forum. DRL is standard on the Equinox, all years. It could be that the previous owner disabled it for some reason. Check the DRL relay in the underhood fuse block. Also, the DRL resistor may have failed as documented in TSB #07-08-42-002. See thread chevroletforum.com/forum/equ...-lights-14651/. In either case, I'd think the selling dealership should fix the problem.
I didn't run the line from the master cylinder. I believe it runs in the car down the door sills. I just patched it from the back seat and ran the lines similar to the original
@@mattd5762 they do run betweent the tank and the body. I think I found an alternate route so I didnt have to disturb the fuel tank and all the rusty old stuff
That's what I put on my car I have an Acura tl with 18x8 rims off a Lexus. I put 245-40s on and I hate them. Squishy. Seemed to really slow the vehicle down. Im looking at new tires and debating 235/40/18 vs 255/35/18 it seems the wider tires are heavier and since my car is mostly stock I'm totally on the fence here.. I think the wider will look better for sure.
I have a 94 dodge 2500. All the lights went out and we did replace the turn signal switch it work for a little then it went out. What could be the problem?
@@suprachefgarage9845 dude, I've literally checked every junkyard/parts store in my immediate area and nothing. Never ever thought about somewhere like that
@@marlinhedges174 it's worth it to grab a couple. The plastic does turn brittle with the heat in the engine bay. I even glue the metal insterts into the holes
Does anyone know what block test fluid is comprised of? Is it anything more than water with blue dye added? Can Windex substitute? BTW FYI nobody tells you that blue block test fluid that has been used and has turned the green-yellow color from a positive test result can be left in an open container for a short while and after the combustion gas outgases from it, the test fluid will return to the original blue color and can be reused, so you don't need to discard used block test fluid. Thanks.
Have same.problem with my 2010 Chrysler Sebring ever since I changed the tail/brake bulb on left side, neither tail lights run now but brake lights, turn signals still work 🤦♀️😒 & I can't find any answers as to which fuse is for the tail lights anywhere
Oh that's terrible. Sometimes I have bulb issues with my supra. If I put the wrong bulb in the holder it causes some weird short or something. I hope you figure it out and I'm sorry I can't be much more help. I always consult the forums too
My chevy cruze 2012 has same problem, left tail light is not working but when I press brakes it works, indicator and reverse gear light works, tell the solution
hey man idk if youll see this but i need help with my 2003 subaru outback i need to replace the clutch and flywheel and watched your video i wanna reach out to you
@@itsreallytheo mine is the cxracing gt3582. The price has gone up but I think it's worth it. You can contact me on Instagram if you'd like and we can talk options. Im no expert but I have used many budget parts and am making good power. I don't know numbers but it sure pulls. Also, I believe a guy I helped on Instagram @supra_haf has a similar build to mine if you wanted to check it out
I have an 02 Subaru Outback. I’m not getting any taillights and the instrument cluster doesn’t light up anymore. I tried replacing all the fuses and bulbs. Sadly I don’t think it’s gonna be that easy.
Get under your steering column and make sure all your loom connections are plugged in properly. After that, you can start looking at stuff like fuses, relays, ground, ohms, etc.... A lot of people play footsie with their cars and unplug stuff by accident.
@@usstexasbb3555 it ended up being an aftermarket alarm that was put in before I got the car. The mechanic uninstalled it and rewired it to get it working hope this helps
@@admiller1997 Its becauae I added a switchback turn signal without the resister and it popped the turn singla and acc light for trailer and running and I replaced them and there nor working anymore
Don't buy this product I bought two bottles and it says satisfaction guaranteed or your money back and they were both worthless the company only offered to pay me for one bottle, very disappointed Will not buy this garbage again
I don't endorse the product and am not compensated for using it. It worked for me for the time being and I installed a new rack much later. My issue was leaking seals and it seemed to do the trick for a while. But I would recommend just fixing what's broken instead of using products from the 'magic' aisle in the parts store. Thanks for watching anyhow.