ive dismantled one of these kidde detectors in under a minute, the easiest way is to pop the housing off, pop the board out, clip the wires, crack the board in half where the ionization source is, use pliers to remove the soldered bits once the board is cracked, cut the plastic bits holding the source, and crack that in half and you should get your button source. ill eventually make a video over the process.
@@adelinyoungmark1929 Great. I'd like to make a alphavoltaic battery, I heard it's simpler than a betavoltaic. I tried a betavoltaic but I'm not sure if it worked or not. If you have any experience, could you maybe help? Thanks.
1:33 correct, this was meant for raman measurements of a specific spectrum, I think the ramanshift of carotenoids in the skin for some very niche product Ive never heard of. OMG 2:40 nooo the spectrometer was already aligned for UV-VIS, and cell phone torch light is a terrible example of white light for spectroscopy
It occurs to me that you may what to investigate and report on the hypothetically cleaner energy production process developed by David LaPoint and his open sourced patented bowl shaped fusion device. I've followed David LaPoint for a decade +-. My interests have been focused on healing energies over weapons' energies of course. All LaPoint's publications are open source. He is inspired through visions. As a result he apparently has had to migrate out of the US to operate. The energy patterns he reports appear to be on all levels from the micro to the cosmic-universal in magnitude. The watching speed of his videos can sped up using the setting button on the video, of course... which I use for expediency ... sometimes jumping ahead 30 seconds at a click to audit. LaPoint parallel's NIF at LLNL, bypassing pellets (no pellets used). The implications of his work is self-evident. He is compelled to first state what he plans to do before doing it....then testing it live action. When I say he is "compelled" I am parroting his own statements that these are Devine voices in his head.... I think you'll find his work of more than nominal interest ... Primer Field Part 3 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1kWWNN_fmqo.html Primer Field Part 2 (on line) if interested Primer Field Part 1 (on line) if interested Many Other Videos (on line) if interested reaching back many years. Here's a good video that I feel is very informative and seemingly accurate: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-36-yUmi0uF8.htmlsi=N1dRpZNCBoaK1U3C
how exactly do you plan on generating neutron (0:40) ? what are the ELSA and power source for the RF? it "seems" nice and all but I can`t tell where you are going with any of this .. still very cool stuff that must`ve cost arm and legs !
Oh that's just beautiful! Great job! I subscribed and am looking forward to your updates. I appreciate the work and cost involved with your project, my garage lab looks similar.
Wow that’s amazing. I hope my lab ends up looking like yours one day. Those cold cathode X-ray tube are really not easy to come by, I’m still working on one that’s powerful and efficient enough lol. Brilliant work, keep it up, you’ve got the most interesting RU-vid channel.
The type of Plasma described here is termed Glow-discharge plasma which is a Resonant discharge of a low-pressure gas. More than The Tesla -Coil, a Rumkhroff coil is employed in a classical stand point.
You typically do not use essential oil you mix it with either propylene glycol or glycerin and use it typically in aromatherapy by heating it. In my opinion propylene glycol is superior. The next time you do the product prior to distillation to rupture all the cells from the grated material
I think the shield was there to reduce stray light in the original wavelength range of interest. If this is originally for Raman, the spectral range should be about 150nm range. So not all of the 2048 detector pixels are used. For calibration, you could use a neon lamp or mercury argon lamp to calibrate the spectrometer with the peak positions from the calibration light source.
You built the most interesting private lab that i have ever seen. My greatest salute! Looking forward to seeing the new data generated from your facility!
I think 2021 and 2022 model did, but I've heard they didn't do it for 2023 due to chip shortage. I'm not too sure. Maybe they have it for Sport Prestige package?
Nice video! Is the hydrogen plasma emitting ultraviolet? Do you need ultraviolet eye protection? Do you have schematics of your set up? What kind of Tesla coil? Apologies for so many questions. I am excited to replicate your experiment. Thanks again for a superb video!
The three phases of Plasma Discharge Modes should be explained more fully in my opinion, rather one being an intermediate stage towards an arc. They are PDM 1, Dark Mode and where there isn't enough power density in the discharge to be seen in visible to human wavelengths of the Electromagnetic Spectrum. PDM 2, Glow Mode and where there is an increase in power density in the discharge and can be seen by humans and PDM 3, Arc Mode and which has such a high density that the discharge enough of magnetic field to restrict the discharge into a tight filament.
Obviously matching the resonant frequency of two objects links them in in a prime evil entanglement but that word is more made up basically it's Magic because the root of the word magnet it magic
I have some vacuum system components and not close to this level 😅 You must have a decent budget. Very very cool though! Making the rest of us very jealous.
Thank you! In fact, it took 8 years to get to this point :) I've purchased the majority of vacuum hardware one by one over the years, and also custom manufactured some of the instruments. Hopefully my research gets somewhere. I'd love to see your setup!
@@iheartnuclear8517 I've been at it for 2 years and not close to your amount of hardware. It's in storage atm and I'll be starting experimenting next year. What do you plan on doing there?
@@DeezNutz-ce5se I will keep an eye on your updates! I am trying to do some experiments regarding ion beam - plasma heating for space propulsion applications
This is by far the most ambitious project I've ever seen on RU-vid. How in the in the bloody hell did you manage to acquire all this equipment? Best of luck to ye.
While Americium-241 is fissile, the critical mass for a pure Americium-241 to become critical is about 60 kg (132 lbs). External pressure acting on such fissile material can contribute to lower the critical mass requirements, luckily I'm a small guy and my pinch would not contribute much. Also, the amount I possess (1 x 5uCi) basically cannot generate any fissile activities.
no but you would scratch the protective coating of the Am-241/gold foil, releasing radioactive dust, and americium in dust form is VERY toxic to humans when ingested.
They're not holding it in the right place. This one likely would've been screaming had it been put by the bottom where the particles can actually get through.