Thank you so much man! This fixed my pedals. The issue I had was that my pedals always seemed to be a little bit pressed even though I was not touching them. If i pressed them, it was like i was pressing them up and down constantly. This fixed everything!
I'm going to try this. My brake pedal is constantly spiking. I'm not sitting with a 20% dead zone on f1 22 and still doesn't help. It also only brakes fully when it feels like. So I'm really hoping this does the trick
Hello! Please, can you tell me if it did work for you ? mine had the same problem, sometimes I can't break for more than 70% and sometimes it will brakes fully when it feels like, and now, the clutch and brake pedals dont work at all. Thank you!
Thanks for the tutorial man. Assisted me in a full maintenance and reconditioning for many more hours of simracing. Thanks to the video, I finally found the center screw and fixed the potentiometer "not working" issue. Great job man.
When I push down full throttle pedal and in game is't fully pushed down ist only 80-90% how to can repair that ? This method could solved it ? Or what I need to do ? Please help! Thank you
Yes your describing the same problem i had, watch the videos and clean the potentiometer with electric contact cleaner and it will probably work correctly again..
Thanks man. I just used this tutorial and my pedal is working perfect again. Was quite an operation tho, being the first time i ever tried that. But great success 😀👌 (Also marked the white plastic thing so re-attaching it was a lot easier)
If you use the buttons on the wheel to sign into a game firat it puts the wheel as main controller and the pad as 2nd on a xbox don't know if same on a pc though
I tried this and my clutch pedal stopped working after I finished. Does anyone know how to fix it? I’ve tried recalibrating but it didn’t do anything. It’s not a big deal because I don’t use the clutch but I would still like it to function.
Did you put the cogs back in the right position, better taking lid off again and taking it out and try moving the cog with your fingers and see if it responds
@@CHUFFER251 no I only wanted to clean where dust collected, in the metal boxes. I didn’t touch anything too technical except for the wire connected to the backing.
@@joylessjulian217 right that's the problem inside the silver pot with the 2 wires on you sprise the case open and get some electrical contact cleaner, spray it on some kitchen roll and put it in between the contacts the circle thing and you see dirt onto the kitchen roll do it till no dirt, not technical just take the pot off i think its 1 nut easy to fix.
Hi my pedal at full depress only shows 80% of throttle and when it’s completely untouched it has random tiny spikes of throttle any idea what that is or if this would help?
mine was doing that, you have to open it up and remove the potentiometer open up the potentiometer and clean it with electrical maintenance spray and it will probably be good again
I had coinops next 2 for pc installed and working fine with lots of different emulators (e.g. arcade, nes, genesis, etc), then I added the teknoparrot pack. After trying one of the teknoparrot games for the first time, the teknoparrot emulator loaded, but I got an error message saying that teknoparrot needed to run with administrator privileges. After re-trying it i just got the black screen, then coinops just returned to the menu. Now the same thing happens with all emulators/systems, and nothing works anymore... I'll try the configuration file fix as mentioned a bit later when I get a chance. This is a cool free app, but the developer should have been able to catch and fix this bug quite easily. I might program a utility to auto correct this after I get some more details on this issue.
Ok. I have identified the root cause and found the solution. I am using CoinOPS Next 2. Just go to "<install dir>\CoinOPS Next 2 (Standalone)\launchers.windows", and modify "Arcade Official.conf", changing: arguments = "%ITEM_NAME%" to arguments = "%ITEM_NAME%" -joystickprovider xinput -keyboardprovider win32 This will make it work for Steam Link as well. The problem is that Steam assigns xinput as the default controller. If you don't pass it to Mame, then Mame would fail to start.
I had this problem too. It seems to be related to the controllers. If you plug out all XBOX/other controllers and just start it with mouse and keyboard, it works properly.
BTW, I only noticed this issue when streaming CoinOPS via steam link. If you don't use steam link, it's all good. I guess the problem happens when Steam assigns XBOX controller 's mapping port to Mame. Same problem occurs in Genesis and other "low requirement" emulators. I am just curious on why CoinOPS does not choose RetroArch, like Pegasus, but rather handling all those tedious configurations individually for each emulator on their own.
In my CoinOps, SNES games ONLY have black screen/no video, yet I hear the audio from them. My son had gotten a hold of my controller at one point in time and it has been that way ever since.
oh yes i had that too i tried to load the games in the base emulators and i realized its an error with the roms themselves i think its something with the format of the roms
I am experiencing the blackout screen too when loading any game on the CoinOPS Next 2 Arcade Trusted Add On Pack. I loaded DirectX and the Microsoft C+++ update and it is still the same. I don't understand the suggestion of downloading the Madman image as it is not an add on pack but a complete unit. Any help would be greatly appreciated. Thanks
I downloaded the madman pack for extra games etc but when i did this out overwrites something in the system which made it then work again, someone has put another comment on below describing another way of fixing this to.
Maybe thi will help you also....It is a calibration issue, i had the same problem. You need to unplug both - the usb and the power connector from the base - and leave it until you see the light on the transformer go out, thats really important. It costs me 3 hours, to solve this problem. It was not the potimeter. I was surprised, because I wanted to buy a new Potimeter at THRUSTMASTER. Thanks @ JULIAN R. Thank you so much, mate.
@UCOHESlUPHSidFKw4054e1oQ Plug out and plug in. The power connector has a blue light. When you plug out the power connector from your electricity it lasts a few seconds and the blue light goes out. This means a reset I guess. Connect again, and that's it. And actually it worked out👍🏼
I had a problem with my clutch where it just didn’t register or work in any games. I tried this tutorial that he did step by step, unfortunately it didn’t work and fix my clutch pedal but instead now none of the pedals register for any games and every time I plug it into my wheel base it causes the wheel base to make alien like noises and go on and off. I used wd40 instead of the spray he used cuz it seemed similar enough. I’m now unsure on what to do and I don’t know how to fix or do I just buy a knew one. Also I have had these pedals since last Christmas and the clutch has never worked and only now did I choose to try and fix it but now it’s just all gone down the bin.
@@marko.321 how did you fix them mine aren't working either it seems like the clutch connection on the little circut board doesnt work because when i switch the connections between the gas and clutch the clutch works but the gas doesnt 🤬
I switched out the gas and clutch assemblies as a test because clutch would read 100 and gas would max at 90. After switching them I had the same problem. Eventually I noticed the problem was that the assembly was screwed down too tight and after slightly loosening the screws closest to the pedal, it freed up a little extra space that was keeping my gas from being pushed down all the way and now reads 100.
Would you happen to know what the connector is called at 1:44? The one you pulled out. My Rj12 connector broke so it won't stay clipped to the wheel. I ordered a replacement cable but it didn't come with the mentioned connector, just the loose wires.