i think the stock shower screen is the problem. i replaced mine with the neouza v3 no problem since then no matter how fine i grind.

Mine was leaking at the piston and running down the side. Maybe yours is doing the same. I had one warranty replacement, but it eventually happened again. I finally took one apart and added an o ring gasket to the leaking original gasket. So far, this has worked for me. This video is how to do the fix. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iHQ81hdn04A.htmlfeature=shared

Hi, mine did the same, I reduced the coffee grinds in the basket, so the shower screen and seal fitted tighter to the lip of the basket.

Porque pones azucar?

Does any of the IMS 51mm precision basket will do just fine? I only got IMS Delonghi 51mm 12/14gram.. I can't find IMS HUGH 51mm on the local market

I bought the Hugh basket but my puck screen doesn't fit it nor does the picopresso tamper. 😞

Cool! Cool! 👏👏👏.👏. Congratulations on the video. It turned out very good. Congratulations. Tell me something! Approximately how many milliliters of coffee were you able to extract? The quantity seems much larger to me and also much more interesting, compared to other videos I've seen on the Internet.

I use Cafflano Kompresso... Idk Wich is better... But RU-vidrs says that Cafflano Kompresso is better than Wacaccoo PicoPresso Did You try Cafflano Kompresso ?

Geek ?.... = Subscribe immediately :)

Thank you so much for sharing. That was the best shot from piccopresso I’ve ever seen. I will definitely get the Hugh basket and attempt to emulate your magnificent shot.

Hi dear, can I keep it bubbling until my shot is done?

❤Oh my gosh ❤

mmmmmm, no creo que sea buena idea, se ve que no se extrae todo el cafe parejo, y para que pase el agua bien tendrias que moler menos el cafe para que pueda pasar bien el agua por todo el cafe, loque hace que el cafe tenga un sabor malo. pero bueno cada quien le gusta el cafe como quiere saludos y te doy mi like 😁

So cool!!!! ☕️👍🏽👍🏽👍🏽👍🏽👍🏽😎❤️

What is the grams of Coffee you added to the basket?

What are those tiny water jets as you are pressing around 4:58 to 5:17? Is it actually the hot water leaking out due to pressure or is that still coffee?

I think I'd rather have an extra ims 51mm basket prepped in advance to pull 2 consecutive shots. Compared to the video, it's only adding unscrewing the bottom and replacing the basket. Unit otherwise is ready to go and kettle water still ok.

The basket is showing what might be channeling? If so, could be the tamping but also too much coffee to handle properly due to pressure issues.

You're not tamping enough IMO

What are the product details and where can i find it? Great video btw!

What in retardation did I just watch???

I bought one of these, and while I love it when it works, it rarely ever works… spins out all the time. In constant contact with their support team

Your video is very nice. I have a question: How many ml was the last Double Espresso you made and what was its temperature? What was the difference between the first espresso you made and the second espresso you made? Was there a difference in the basket? This is the first time I have seen so much output in a manual espresso machine. and also does it come with the large 51 ml basket you showed when purchasing this machine?

How does this taste?

and the taste comparison?

I found the stand on Aliexpress. The brand is Mojae.

3:31 so did you place the Wacaco shower cover and puck screen AND a second after market puck screen ...2 screens?

Hi! Does Kingrinder officially recommends a specific torque (Nm) and speed (RPM) for the drill when we use the drill to grind coffee beans with the Kingrinder K4? Thanks for the vid!

Like your picopresso vids and the experiments … was initially researching on the Flair Pro 2 but decided to start with a smaller device… waiting for my Picopresso to be delivered along with IMS basket & Nomcore puck screeen Next accessories I will likely get are the Wacaco pressure gauge & stand & also a nicer WDT & Tamper 😅 Will try to make Kopi-0 espresso

Hi @kvygeek what grams per water ratio are you using when you use the HUGH basket?

the extraction looks a bit off.. Is it because of the holes in the basket being bigger

hi i think when you use this basket, it look less creamy than the original one right ?

living the good life, your picopresso videos are tempting me to buy one

wow you have many kinds of milk frothers 😮

A whole collection of very popular videos, but only 600 subscribers. What's going on?

Wait - I love coffee and I love umeshu...I need to try this

I'll give this a try in the morning (hopefully minus the water spillage...), looks great.

Hey Which filter basket did you use with Pico?

Your videos are so chill and relaxing, keep going

why does 4 cups give you 2 cups?

Gring setting for K6 also the same? 57 clicks?

i cant get the right doser which one are you using

This is way too much effort. I'll stick to the flair.

This proved that latte art fail not because of the Nanofoarmer. Just Kidding 😊

clearly i should have read though the comments first, but the original tamper will not fit on this basket. i also have the normcore tamper that is 51.5mm that fits the original basket perfectly but will not go into the hugh. you will need to buy a regular 51mm tamper. the hugh basket itself does screw in nicely into my picopresso where the la pavoni basket did not - it made a screeching noise and did not hold pressure, leaking out the sides. while waiting for a 51mm tamper, i used a puck screen and finger-tamped the puck down - didn't produce optimal pressure but seems like there is no leaking at least.

Some of the generic 4-cup baskets on amazon do fit. Can someone be good enough to paste an amazon link to a 4-cup basket they confirm fits? Appreciate it!

😮😮😮😮 🔥

Someone spoke very good Cantonese! 😂

I like your video! I have Kingrinder K2 and Wacaco Picopresso too but still figuring about perfect grindsize. do you have any suggest for me?

Hello dear friend! Thank you for your videos and reviews, they are wonderful and informative! I bought a picopresso, and I wanted to clarify something with you. Should the base of the bottom of the basket be flat or is it slightly convex? In my set, the bottom of the basket is slightly convex, and when it is installed on the table, it may wobble a little, is this normal or is it a design defect?