Rewire the wings and add one more connector at each wing root. You can reuse existing led wiring, just re-arrange to have common ground via normal servo connectors and 3 separate feeds via the new connector. Picture here: www.rcgroups.com/forums/showpost.php?p=52263623&postcount=4592 Arduino based LED controller here: github.com/AndersHoglund/ArduinoProjects/tree/master/RcLedController
Sorry that I’m asking, have you a separated led controller or you have reprogrammed the receiver? I’m not an expert in programming, and I don’t really understand how you make. The picture and the code are for me not helpful. If you kann be more specific whit a plan or something I will be very happy. Thank you for your help and good luck whit your future projects
@@ghostmann4965OK, sorry for lack of detailed info. Added some info on Arduino connections in a new text file: github.com/AndersHoglund/ArduinoProjects/blob/master/RcLedController/Arduino%20Nano%20connections.txt You will need to learn how to use Arduino from other sources on the net, plenty of it around. Google is your friend. There are also some more info in the first chapter: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ymJXeX3bK3o.htmlsi=uqrBQtPqRVJIIr2N
@@ghostmann4965 Description text on Github updated with some more info. But I can not keep Arduino classes in PM, YT comment or howto videos, you need to get some experience your self. Buy a couple of Arduino Nanos and start experimenting on the bench, before tearing your Viper apart. And follow existing guides, for example: www.arduino.cc/
As described above, added my own Arduino based light controller. There are some more follow-ups to this clip, latest here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x_PiQnvw0Hg.html
I have this problem to arm the motor The maximum frequency of the PID loop is limited by the power of the CPU Processing. CPU load should not exceed 70% how can I solve this problem? thanks in advance for your answer
Interesting queation. It works the same regardless of Angle/Horizon/Acro modes, maybe it should not show rates but rather absolute angles in angle/horizon mode? (BTW. All those modes are "stabilized", only differences is if it is abdolute angle or angle rate stabilized.)
@@did3d523 Yes, 80. Also corrected myself, Horizon mode has no limit. Why not install RF Configurator and firmware and try the limits for your self. My maiden flight was in Angle Mode: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bPKuDDVprWM.html , even though with a different FC and ESC.
0%, -50%, -90% But 90 is probably a bit too much. Get all my iX20 settings here: drive.google.com/file/d/1a63JbFksbq-9yPB7hJmqRxx76TBSViMk/view?usp=sharing
Well done. Hope you have been able to get it up and flying on Rotorflight. That looks like an old Gaui Hurricane. I have one sitting downstairs in very poor "as crashed" condition :-). It used to fly great.
Love boats especially those old wooden speed boats. I only wish they had a go pro so you could get the feel of close 2 a 100 yr boat with V12 ? At least and probably cruisers right along at 80+
Not much to show. Poke holes for the LEDs, cut slots under the stabilzers in the back of the fuse for the wires, pull wires up front and connect to the LED controller. github.com/AndersHoglund/ArduinoProjects/tree/master/RcLedController
Inte speciellt STOL-ish, för tung. Inte heller FT FreedomFox. E-Flite Turbo Timber Evo kan jag däremot rekommendera starkt. Även E-flite DRACO i viss mån-
@@AndWhoIsMakingMovies Okej trist! Då hoppar jag över den. Börjat skissa lite på en 3D-printad Kitfox men tror det får bli ett projekt längre fram i tiden. Flyger du något med din FreedomFox?
@@GoosebumpRacing Nja, inte så farligt trist. Båda är skojiga sportflyg även om de inte har utpräglade STOL egenskaper. FF inte flugen mycket på senaste tiden, så mycket annat.
@@AndWhoIsMakingMovies Är lite sugen på en STOL-kärra nämligen :) Har en P-51 på 1,4m men funderar på att byta ut den då jag aldrig vågat flyga med den haha. Tycker att FreedomFox ser trevlig ut, även Draco (om den vore lite lättare då) :)
@@GoosebumpRacing Är du ute efter STOL ska du absolut kika på Meijers "lill'CUB" på RcShoppen facebook.com/rcshoppen.se Antingen lilla C0 varianten eller stora 2m. Inte säker på att 2m finns som kit än. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b2PxjXFSrAA.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IJsuFjutZKw.html
