Welcome to Coral Gardens, Our SPS Dominated reef build Red Sea Reefer XXL G-2 series tank build from day 1 Follow our journey with reef keeping from day one.
That’s it you have shown me the last video I’ll ever watch of Red Sea there tanks seals let go within 5 years there products seem like they just pushed them out to make money without testing and there only response is if it’s not working replace it. My new tank will be a Cade and there will be no Red Sea products anywhere on out
Harvest half your chaeto, run light 24 hours a day to start and your ph will benefit the most. Just have to keep harvesting your chaeto frequently depending on nutrients levels.
I am getting pretty annoyed with icp analysis. I am getting the same results with high iodine and low traces. Its showing my iodine 10x the high limit. Seems this has been going on for a couple months and they have not corrected. Im sure they have given false readings to at least 100 reefers by now.
If you pay attention to the actual numbers each lab provides (based on the numbers you put up on the screen) are all within 15% of each other with the exception of AL and I. 15% variability is within the margin of error for these tests. It is because there is no agreed upon "good" ranges for these elements that you get the differences in recommendation (too low or too high or normal) - for example, two labs indicated that your Alk was too high, even though you didn't think so, since people have a different range they'd like to be in. With I and AL, one lab result varied markedly from the other two. That indicates that the one lab experienced an error for that element. As a result, the best way to use these tests is to check agains ranges you'd like to maintain for a given element. If you don't have a range in mind (such as the trident method or others), these tests are best used to look for any values that are indicated as grossly out of range. In that case, you need to send in a second test. Because as you noticed, grossly out of range could indicate a lab error. If the second test confirms the results, then you can take action. Otherwise ignore it. Overall, I find these not particularly useful - I don't try to maintain particular ranges for elements other than Alk, NO3, and PO4. I use them if my tank goes downhill and I cannot figure out the cause. In such cases, the test can provide an additional clue, if the result are used with the above caveats I mention. Another use is to keep a trend for your tank by sending one in every quarter, for example. That way you can be on alert if any values change drastically (again subject to a second test confirmation due to errors). I don't use it this way because, I really am not sure whether some of these elements really make a difference, especially as long as you are doing consistent water changes.
I think the lesson from this exercise is pick one ICP testing company and use it. Don’t chase after the numbers look for trends and whenever possible check against your own test kits.
Great video, the aqua forest always show me high Aluminum for some reason also. regarding the salinity now, all tests will show hight alinity because of the crystams forming over the time that test does when travels far, and also due the low temperatures and low pressure when they travel by air. So don't be too concerned about salinity.
Please share anything you might have done for this beautiful growth , maybe parameters , light schedules . Tank looks great . I am especially interested in the reversing of the run .
Wow! This isnt the first time i see these major differences. Hard to want to cough out 40+ dollars each time yet not really be trustworthy. Thanks for sharing!
Thanks for the insite.. I was just about to get a I.C.P test for the first time but now i'm not sure i should trust them. I'll keep watching to see if you find any good answer to why these are so off. Love the channel and your tank. I've been doing salt water fish tanks off and on for years and I'm coming up on 2 year for my first reef tank. Just a few corals right now , but i'm working on it.
Think it all depends on who is doing the testing, did they do the proper calibration/qc on the machinery before they started testing, and were the results reported properly ie did you get someone else’s results by mistake. I don’t know who, if anyone, oversees these labs. It’s not like there’s any state or federal or professional organization that licenses these labs and vets their methods-if anyone knows please chime in-I’d like to know for certain. I work in healthcare where everything is regulated heavily for good reasons to ensure reliability and accuracy. Somehow I don’t think it’s happening with ICP tests besides the company itself, so who really knows. KISS- water changes and trends in testing not numbers is what I seem to always go back to. Just my 2 dinares.
I've seen 4 other reefers do the exact same thing as you. Send in tests on the same day to multiple companies and same results. They were all different. I sorta stopped relying on these tests and have went back to water changes. Box of salt is less than icp and all the trace elements you have to dose. Not worth it in my opinion.
I have the same CO2 Scrubber and Protein Skimmer. It's been such a pain finding proper instructions on how to install the CO2 scrubber to the inlet which I have just hooked up to the 2 little holes on top...my question is did you run a tube directly into the sump at the base of the inlet and completely bypassed the inlet valve all together? Any information would be greatly appreciated. Thank you in advance. I'm liking your video as it has been informative!
Yes I did run straight to the inlet on the skimmer, I did bypass the inlet valve. I found the tubing at home depo as mine was too short. The centre outlet on your co2 scrubber is for air intake do not put it on that one. Thanks for watching, if you hit the notification bell it will notify you when I publish my next videos. Lots more to come.
When mine gets near the end of the roll I have had a couple of jams. The fleece tends to literally stick to the sides. I hope yours is good after the repair.
I’ve been reef keeping since the late 90s too. The key is to keep cool reef fish that DON”T require crazy foods, extra work and machinery like UV systems to keep healthy. So I’m all about hardy worker tangs, wrasses, bristle worm eating dottibacks, gobies, etc. I focus more on the reef tank ecosystem as a whole than the constituents. I use just the basics so 5X extra amounts of bio filtration, super high flow w/algae scrubbers combined with 20% water changes every 3 weeks. No skimmer, UV, reactors, roller, etc…Basically as little technology as possible for life support. If you do it right the reef tank will flourish and manage itself over time and will be super healthy with far less expense and work.
15ppm nitrates isnt high, its actually perfect. If a person like them lower thats their preference but as far as coral health 15ppm is good. The higher my nitrates are, the better looking my corals look
It looks like the front glass panel overhangs the stand, is that right? Maybe they did this so the doors would close shut but the front glass needs supporting.
It does look like that, it actually sits on a metal support all along the front panel. This gives it the floating over the stand look. I really like the look.