You just confirmed that you dont know anything about props. You cant just swap them randomly. They have to match with motor power curve, rpms, magnet count etc. If done correctly less blades are always more effective but more noise. Its physics!
But how... i tried 3 difrent Tablets and it did not work. Now I managed to get it kind of working with a raspberry pi display. But still it's very buggy
Hey mate. Hello from Spain! In betaflight you only change the rates and that's it? No more configurations and changes like trolle % Some people said use for cinewoop angle mode I'm using a rate and confirmation from @PattyFlipz. Trolle limit SCALE Trolee limit % 55 Trolle MID 0.50 Trolle expo 0.50 Take off airmode Use in angle mode Angle/horizon Angle strength 32 Angle limit 45 Drone NEW Flylens85 from flywoo, dji controller 2, o3 unit. I want to use this to fly indoors, no flips, no freestyle things. Can you help with some tips? Thanks in advance!
Absolutely amazing. Flying with GepRC Cinelog25 second week, indoor it flies smoothly but outdoor totally unstable even with almost no wind. As a rookie I don't understand what is wrong - is it settings, drone itself, pilot...
Have you been able to make use of all of the buttons onthe controller? i think the XF Nano RX would need to be switched from 8CH to 12CH, but that would allow the extra channels to use the last 2 buttons on the back, which is what i end up with. I use one as a timer reset on the controller itself and one as a Tele page trigger.. but still id rather have them to use.
Still using my Tango 2. Love it, and built in crossfire is always convenient and nice. 500mw would be better but it seems to go very far the way it is stock. I have Air mode on the top right bumper button, i dont like Air mode when im trying to fly close to the ground or land on a spot and then take off, bc of the way it adds throttle on its own and sometimes its alot..
I'll give this a go with my protek25.. It's always been too jumpy and not as precise. But since having it, I haven't had a lot of time to get out and fly the last couple years. Fingers crossed as I get back into the hobby. Also, need to now find rates for smoother freestyle with my protek 35
@@griffey11 I haven't been able to try it as it's been a down pour, gale force winds up to 40 mph over the last few days.. It's very close to my rate profile 2, although my RC rates were 1.00, and my Super were 0.70 and my expo was 0.00 and throttle expo was already on 0.20.. I'll give it a go, but just spent 2 days reinstalling all the firmware on my upgrade Mobula6HD and those expo were awful, and I solved this by installing the rates from my Emax Tinyhawk and now it's very smooth. Might see if it works on my protek. RC rates 0.80.. Super 0.60 and Expo 0.60 and the last one is 0.20.
@@griffey11 So I've updated my rates, but only managed to fly inside. I feel the response is smoother when flying slow and steady, it's definitely different to my original rates. I need to take it outdoors to see how it reacts in an open space? I'll add the rates onto my Protek25 as that one is a jumpy quad. I'm usually flying full speed , freestyle and while I'm no expert, trying to aim for gaps has been me half committed and trying to not make a mess in my trousers as it's just so twitchy on the throttle and pitch and roll axis
@@griffey11 I've got an update.. The new rates worked very well. Despite I was still flying it freestyle mode, the quad was really smooth. The throttle response on my Protek25 was so much better, I managed to thread the needle coming out of a split S through my shed. Usually, I would have abandoned the attempt as I would panic and be fighting the throttle to keep it from hitting something. For those smooth cinewhoop feel, these rates definitely improved my slow flying. Cheers
I didn’t make that same mistake, but I hit rescue with only 4 satellites locked about 80ft over asphalt. The 18650 4s battery took all the force and split the cells. Whew!