This is incredible. I didn’t get PT until like 2008 so seeing all the normal core features still there is amazing. The fact that these dudes are so corny makes it even better 😂
Awesome video thank you!!! I just have 1 question. Do you know how to sync up the Akai mini drum pad to work with the KONG drums in reason? I can use my keys on the keyboard but i really want to use the drum pads on my MPK mini instead. Thank you
Well I suggest you ream the manual and make sure all setting are right before you try to replace that switch. Replacing a switch is not that hard. But you don't want to do soldering and that then find out that was not the problem.
That's a very good question, was the vehicle in a front collision? The whole headlamp unit just sits in place for what I could see. I have never tried to adjust them.
@mikeallen818 I think that's just the way they are. I hardly use the high beams since I live in the city. I don't think I have seen any way to adjust just the high beams only. There might be a way but that's not something I have dealt with.
Very handy. Thanks for the video. But it seems it doesn't work with real-time automation, does it? looks like it only "reads" the automation already given, am I right?
Sir, my boss me 80 produce so much noise when i switch to distortion...and when i put some gain....when i switch to Clean channel it is quite okay... I also did noise gate setting but doesn't help....do you know any solution? 🙏🙏 Please help
I think you can't tell the difference when it's just the camera mic. Defeats the purpose of comparing mics without hearing the audio through monitors then recorded through a cheap mic for video. Would have been a great comparison if we could actually hear the audio coming out of the DAW directly...
Yeah I understand, but even with the camera mic, you can hear the difference. Back then I didn't not have an elaborate setup to record audio and video at the same time.
Cómo guardar la canción en el Disk. Y después encender el teclado y como volver a descargar la misma canción y seguir grabando en la misma. Muchas gracias!
Please Help 🙏🙏🙏🙏😭😭😭😭 My father has a Korg Nautilus which is almost identical to Korg Kronos. Recently a new update of Nautilus was released (V1.3.3 maybe 🤔) while updating the Nautilus it failed and is stuck at the system startup saying, 'system startup failed'. My father also checked the ram and there was no problem
Do you know if dust accumulated inside could be the cause for it to be a bit dirty even in the cleanest channel/patch? Is it ok to blow some compressed air from the instrument jack in your opinion?
@@descargamusicalny oh I see. Pardon the misunderstanding but my question was more about if you think that if my unit sounds a bit dirty even while playing with the cleanest tones/patches, that could be due to a lot of dust inside? And if so, do you think it's a good idea to blow some compressed air into it through the input holes? Thanks for your answer!
@derekk.1750 okay, of you hear static or noise especially when moving knobs, the simplest approach is Deoxit D5. Is an electronics cleaner. Start with that. Compressed air might not do the trick. You might have to open the pedal board so you can really spray it well. Spray all the knobs inside and move them back and forward.
Maestro mi me 80 funciona todo! El problema es que suena opaco o oscuro el sonido como si estuviera tapado algo así ¿que podrá ser?estaré atento a su respuesta por favor
@@descargamusicalnyI messed the power input jack by stepping on the barrel of the powered supply and I believe a piece of plastic or something is preventing my unit to properly connect to the powered now. Do you think I can do this myself? Or should I take it to the work shop?
hola amigo ami me salio system cannot start due to a file system error pleace reinstall the system sotfware (6) prengute a un amigo y me dijo que eso es un advertencia que cuando el 6 llegue a 19 la placa madre morira ayudaa!!!!!!!
The Digi001 and 466 GHz Mac G4 used in conjunction with a Yamaha 03D digital mixer and Mindprint Envoice was my first real studio set up back in 2001 and it was a great sold set up. I used a for years before upgrading to a Digi002 and then Diigi003 with a 2007 Intel imac. I actually read the owners manual extensively and learnt how to use Protools LE which was a crippled version of the software that wouldn't allow you to use more than 24 mono audio tracks (later 32 tracks) even if your hardware could handle it. I managed to record serious productions using just this system and it's standard RTAS factory plug ins but I could never get into using the newer midi tracks so I used Logic for the midi side and used Protools LE for the audio side. IMHO to this very day, nothing touches Protools for dedicated audio editing! it's very sad that Avid has now got the corporate fascist subscription which I simply refuse to pay and after 23 years, I'll no longer be using Protools once my way overpriced subscription runs out in a couple of weeks. Avid will destroy Protools just like Gibson destroyed Studio Vision. Sad very sad!
We all feel some kind of way about all these subscription models from all these companies. I guess you can just keep using the last version you currently have and not upgrade your system for a while. I know some studios that are still running pro tools 10 HD and they get the job done.
@@descargamusicalny I have a perpetual licence for Protools but I'll be out of luck once I get a new silicon mac. I'm going to bite the bullet and get into Reaper and Mixbus 32C and see which one works for me the best when it comes to audio editing. Logic will be a keeper for midi editing.
I have kronos 1 and I have the same problem, I had 2 different brands of ram and they told me that maybe that was the problem, then I took out one ram and kept only the other and the problem was solved but for a few days now it froze again.
I don't have the unit anymore, what you can do is open it up and measure the tactile switch for that button. You will need a caliper. Also not if its a 4 pin or a 2 pin. Good luck
Well if the tactile switch needs replacing then is basically the same procedure but, you need to open up the unit and measure with a caliper the switch. Check if it is a 2 pin or a 4 pin, good luck!
se me ha complicado para crear una bateria con cortes de bateria... primero.. en en el set de bateria has grabado solo un bombo... a mi me gustaria agregarle un redoblante por ejemplo y un hi hat.. sobre la misma pista y por partes... ademas de esto me gustaria hacer cortes de bateria y cambios en la bateria en el mismo canal... nos podrias dar un tutorial de esto por favor ?
This compressor did not come from autozone. It came from a manufacturer in Florida. Still working to this day. You can feel free to buy as you please but, yeah if you can afford to go to a Ford dealer and get the original part then sure why not.
Hola.. el video es para verlo varias veces.. con esto he aprendido como crear una batería con cortes en el edit mode !... (usando un poco mi cabeza no ?) lo que le quiero preguntar .. que me parece interesante... es donde o como ver la canción pero no en numero de compases sino en tiempo reloj!.. esto puede servir para saber cuando se cumple un minuto para un reel de internet por ejemplo! me parecería una información útil para que nos expliques
