Hi Mate.. so this was from drenza. But the air filter does not work for this so you need to get a proram 70mm which you can get from my webstore. BUT be aware this leaves off a hose. I think I mention this in the video. I also have a stage 1 map from superchips. Worth noting, I have just changed to another set up to try returning to more of an oem. I'll be adding this video shortly. If you need more info click the link below if you want the proram and my socials are at the bottom of my Webstore. customrides.uk/product/proram-70mm-id-proram-120mm-universal-cone-air-filter-pr-cc-120-70/
Lucky didn't start a fire.. never actually felt them but being led I would not expect them to get that hot... might have a test tomorrow out of interest.
Great vid 🔥 I didn't see your car on the day but the show was absolutely amazing! I had to take a break back to my hotel room as it was so hot 🥵 I think you film too many Focus's 😂 Also what is the name of the first music track in this vid plz?
Great effort mate , I personally hate anything maxton its shit. The fitment requires you messing around with the bumper and drilling which is no no. I personally have the TRC one which as you said uses the oem fixings its made of fibreglass you'll need to file the retaining clips down bit by bit as they'll be too fat when you first get it 👍🏼.
Love the new look 🤩, look forward to seeing it at Ford Fair, I’ll be there with “Scottish ST owners club” with my ST500 focus, I’ve got plenty carbon bits in and on it from your store bud 🤘🏼
2 месяца назад
Hi. That looks awesome, how many cans per wheel did you need. Thanks
I used 1 can per wheel but could have done with 1 more...... they have quote a few colours. Not sure if it will last long but just for Ford fair will do! May consider using something more permanent as I quote like it
It would have if I have a drive was and the tools. For this application it suited what I was doing. If I was going for a permanent spray paint then I would have chosen to do things differently. This worked for what I needed.
I have the diesel 2.5 version...i unplugged the battery... nothing...i reset with brake and gas.. nothing..i go to mechanic..the fault said not from speedometer but looks from turbo . We checked.. nothing...ge deleted 1 month all good..now again to the SAME PLACE Start to do the same....300 kml far from home...just this time ill keep driving.... terrible stressful
You have to check many things: 1-Check soldering(look for crack) on conector of instrument cluster 2-check glove box conections 3-Check OBD2 port conections and wire conection (1 conector on the drive and other on passenger) 4-Check fuse box conection of engine 5-Change you baterry
The soldering would be the obvious starting point as this happens to so many mk2 in the UK. We all get them re-soldered and this sorts the issue. If your getting an engine fault, a power steering fault, keeps cutting out then its probably this.... do check battery terminals are tight, check the ground is clean and good contact but if you have done all of these then take the cluster out and get done!!!
Omg i forgot an important detail.. before this happened i change oils and the mechanic changed a fuse... inside.. glovebox for cigarette lighter....the first mechanic is my basic stuff one and second is the ford expert.... when i told him he said if he touch the outside fusebox then possible....BUT it happened after the first one touched the inside fusebox.... Excuse my English i hope is understandable
Wheels look great and if I was doing it, I'd do the fronts green too! My sugestion is to spray some paint into the lid or something then use a brush to touch in around the wheel nuts before putting the caps back on.
Hi mate - Nice vid. I have just installed a Junsun Android screen unit. My Audi A3 (2012) already had an Audi UHV Bluetooth connection with an excellent microphone for speaking. Now after installing the new Android screen, I can’t use the factory integrated microphone in the car. Is it possible to Connect the integrated mic and disconnect the shitty junsun mic?
where did you send the cluster off to? mine the lcd display is totally disappeared, hasn’t effected the performance and been driving it like this for months but i know i need to replaced. will soldiering it fix the problem? i presume it will.
Original on facelift 2.5 RS are PR21W or PR21/5W ? Is only one bulb for tail and brake ligjt or? I must put original rear ligjts on my 2010 2.5 RS but doesnt havw bullbs in it, so donr know which one I need. Thank you