External refrigeration equipment can use a dry cooler, which does not require water resources. For more info you can contact us by email bd@foghashing.io or TG t.me/foghashing
Each container model is different, so the prices vary. The cost for 1MW is approximately around $150,000. For an accurate quote, you can contact us by email bd@foghashing.io or TG t.me/foghashing
Hello Jack , many large mining farms are already using immersion cooling, and it is also a trend. Can you give me your contact information? I will show you more information.
Hello, since this is an upgrade of the hardware product, it cannot be updated through software. Therefore, if you want to use the latest dry cooler with AC/FC functions, you can only reorder it. The new version of the dry cooler is compatible with the tank and can be used together.
Do you have any plans for at-home hydrocooling? Similar to the Home Immersion C6 model. Smaller Scale Home Mining systems like H4 H6 H12 hydro-cooled home systems. 4 6 12 Miner capacity Modals. I Look forward to OCT when the Antminer S21 XP Hyd (473Th). are available I plan on Investing in 6. I and other Home Miners can afford to invest in 6 of these miners with my savings. Our mining Shed or room doesn't have Space for the H200 let alone affording 36 miners are outside the budget of Home miners like me who have for example 4 miners now and looking to expand love the home immersion suites you offer.
Hello, currently we do not have any household hydro-cooling products, the smallest unit we offer is the H200. However, thank you for your feedback, we will evaluate internally for similar demands.
Very interesting video. I have heard that to submerge the equipment in dielectric oil it is necessary to replace the standard thermal paste on the S21 plates since it falls apart and pink deposits remain on the bottom and contaminate the oil. This is true? Which one would have to be placed? thank you very much in advance.
@@foghashing lol that is just a promotional video . post something detailed like this video guys. that video is just a drone shot on the project in australia . would be nice to see it in detail the community who wants green mining farms would benefit from it .
The dry cooler can be placed anywhere. The tank can also be placed, but the tank needs to be protected to prevent water from entering the interior of it.
Yes, we did not set this function before to protect the mining machine. We have added this function in the latest version. If you want to upgrade the previous version, please contact us by email bd@foghashing.io
Thank you for the video. I just installed the c6 system and my air cooler unit fans won’t start when connected to the tank outlet. The temperature went to 57C and asic went red lights overheated. When I connect air cooler cord directly to power then fans runs but full speed and it’s super noisy. Please let me know what is solution to this or how to troubleshoot the outlet from c6 tank.
It looks like the c6 tank outlet has no power for air cooler so I just connected to external power source, also had to switch to heating from normal for fan operate properly. Looks like I don’t have AC/FC option and I’ve been told that o have EC fans on my air cooler that just arrived. AC/FC maybe just so new not being shipped yet.
C6 is an ec fan, which adjusts the speed according to the oil temperature entering the tank (fan oil outlet temperature). There are two modes to choose from. In HEATING mode, the fan starts at 41.3℃, and in NORMAL mode, the fan starts at 20.5℃.
the lack of noise is a big plus for me , the only thing that kind of holds me back is wat if the miner breaks down and you need to repair an asic on one of the boards , by lifting it out of its tub the thing is now a greasy mess once you take it out and is dripping everywhere so put it on a rack over the tub and leave it till its finished dripping ...... that be about 3 hours lost mining allready and you havent put a screwdriver on it yet ok quick walk to the bathroom where you at least can flush the oil away intoo the showerdrain .....how do you flush the machine from the oil still sticking to it after that to get rid of most of the oil before taking the screws out whout getting filty up to youre armpits and getting greasestains on everything you tough (need to go to the bathroom , better plan in advance) will the tin still flow on the chips and the heatsink as it would be pretty contaminated will alcohol be enough to spotclean the surface and with the upgraded bigger heatsinks will the termal paste desolve in the oil reducing the thermal connection to the heatsink allso before inmerging the wole thing you probably need to take off the important labels (serial numbers etc ) stick to the housing as they probably peel off after some time inmerged since im planning to use an antminer the housings are the same throughout the range , might take the boards from a new miner out of its housing and put it in a used housing storing the new one for when its time to sell and then drop it in the oil that leaves the outside at least looking like new come to think of it , might be a market for housings that are watertight to be used both for mounting everything intoo but allso as the tank basicly an enclosed housing with gaskets and a entry and exit bung for the oil
Yes, you are right. For air-cooled mining machines, it requires certain procedures to modify them. However, liquid cooling is usually more stable and it is not common to repair mining machines, so cleaning mining machines is also a very small probability event. At present, Whatsminer has launched oil-cooled mining machines, which do not need to be modified and have official warranty. This is also a trend.
Hello, thanks for your video. Everything works in my home but the hashrate on the supply screen is stuck at 0.0/0.0 . Do you know how to unblock this issue ?
Is it possible to use the output pipe to warm a place before sending it to the dry cooler? Do u provide what is needed for that (bigger pump for example)?
Different mining machines have different requirements. The power supply fans of most mining machines need to be removed, and they do not require additional fan simulators. But for Iceriver, it cannot remove the power supply fan, otherwise it will not work.
I am looking for a system that can run two radiators. One outside to cool the miners and another one with a valve I can open up in the winter to heat my house.
This product is designed for air-cooling mining machines. We have a special product M6 for M66, which can also accommodate six M66s. It was developed by us and Whatsminer. If you are interested, please send us a private message via telegram @foghashing or email bd@foghashing.io.
Compared with air-cooled mining machines, the noise of C6 is very small. The noise mainly comes from the dry cooler. You can place the dry cooler anywhere, in a warehouse or basement, or outside. Welcome to contact us by telegram @foghashing or email bd@foghashing.io