Our channel helps espresso lovers from all over learn how to maintain their espresso machines such as DeLonghi, Saeco, Gaggia, Breville, Jura, Rocket, Rancilio and more. Whether domestic or commercial, we show you how to service your machine to lengthen its life and get the best flavor! If you own a coffee maker, espresso machine or are a business owner who is interested in the best maintenance to get the best pour, make sure to subscribe to this channel!
New videos are posted on the 15th of every month with the occasional bonus video, so make sure the bell icon is on so you know when a new video is published!
If you have any questions or want to request a video idea, just leave a comment on any video, or send an email to service@maticoffee.com
Great video, very helpful thank you! 👍I have found the Haynes lubricant that you used on Amazon, but I couldn't identify the other tube that you used for the transmission. The one that you applied with a brush to the spindle inside the machine. What is it please? Thanks
Thank you so much for this video! My brewing unit doesnt come out at first, I have to move those arms at first . Do you know why it stops there when I turn it off? Is the machine broken? Thank you
The machine is programmed to go back into the 'home' position when it is shut off, for easy removal and cleaning. If it is having trouble doing so, there could be a blockage or something isn't communicating correctly inside the machine. Keep an eye on it and if it gets worse it might be time to bring in to a trusted technician.
Si tiene problemas de energía, podría ser la placa de alimentación o un problema con un cable desconectado. Me pondría en contacto con Delonghi para obtener ayuda. (google Translate)
This is my 2nd Keurig coffee maker of this model. ru-vid.comUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first worked fine for more than 2 years, and I could still get a decent cup of coffee out of it if I fiddled with it when I decided to replace it. The problem I had with my first unit was this: When attempting to brew a cup of coffee, the unit would either keep brewing until the coffee was undrinkable or it would not run long enough and the coffee produced was way too strong. I cleaned the unit as best I could but it did not help. So in the end it was just too much trouble to get a good cup of coffee out of it, so I decided to replace it with a new one, which has been working great since I unpacked it.
Hi Mati Coffee, this was very helpful! Onr question: the upper part of the brewing unit (the piece that presses the coffee) is stuck at the top, and I can remove only the lower part of the unit. How do I resolve this?
I pulled the infuser out of the machine and noticed some plastic pieces laying inside. After looking a little more, it looks like the back part of the infuser did not get lined up with the pin (I think that's what it is called) and it is broken. That's my best guess after looking all over for information. Can I buy those replacement parts? I'm not sure when it happened - likely in the last week. I live near Portland OR and can't seem to find a place who can help. Thank you.
Very helpful but much, much to fast and would be better without the music and with explanations.... text isn't up for long enough... I'm dyslexic so had to keep pausing to read the text!
DeLonghi's own instructions urge against using soap (as do, I think a number of coffee aficionados, who assert that the taste of soap will never come out of the infuser). What's your experience with regard to soap affecting the taste of the brew?
As long as the soap is mild and you're using just a bit, you should be able to wash out the taste. It is always recommended to use a espresso machine cleaner for best results though.
In my machine the piston of the infuser doesn't reach the upper position but stop at 3-4 millimiters from the top: the result is that a part of the coffee ground remain on the filter. Who know which is the problem?
Hi there, thanks for this informative video! I use Xavax OKS 1110 on the infuser, however, I noticed that you used a different type of grease on the transmission to the food grade Haynes grease that you used on the infuser. I'm in the UK, is there a transmission grease that you would suggest, or would the Xavax suffice for the transmission? Thank you.
Thanks for the video...I completed the clean up as per the video...now when I run the machine, the brewer cassette does not stop elevating, like it wants to come through the top of the machine...after this initial cycle, I get the "insert brewer cassette" which is already installed.
Thank you. Mine was so stuck I did not know the metal disk could even move up and down. The symptom was coffee grounds going everywhere inside the machine. The debris basket was not getting filled with the round pucks of discarded coffee. I disassembled, cleaned and lubricated per your instructions and it works great. I found replacement o-rings and the same food grade lube in your video on Amazon.
When I dump out the spent capsules I notice a lot of water is this normal? I made espresso with the cup holder out and saw at the end of the cycle it dumped some coffee into where the spent capsules go.
Sorry to hear that. If you purchased with us, you have a one-year warranty. Bring your machine in and we can take care of it for you in a day or less. Otherwise, I suggest you reaching out to your seller. They may be able to help you & hopefully offer similar warranty. Good luck!
Great video but I get an issue with my machine after a deep clean. When I clean out the insides I usually sit the machine at an angle into to sink, I then use water to remove all the grounds from the internals and it runs out. However the first time I did a deep clean the machine refused to acknowledge the grounds tray was back in. I went through all sorts and eventually stripped the side panels of the machine to locate the microswitch with a view to replacing it. I decided that looked easy enough but reassembled it and left it over night. It worked in the morning and continued to do so for months, then came deep cleaning time and once again I get this issue, and now again tonight. It is a pain and I know the switch is there and now cover the switch hole with my finger... still does this to me. Is the switch really that sensitive? I cannot see that being the case! It's just contacts. Thoughts?
The sensor is getting wet when you are cleaning in the sink. Therefore, when it dries off it works the next day. To locate this sensor you need to remove bottom panel of the machine. Be careful when cleaning the machine. Hope this helps, otherwise feel free to call our office anytime.
@@MatiCoffeeIncElkGroveVillage Thank you for confirming as I expected! Great news, have you seen this before? As per usual it started to work today about lunchtime! I may need to consider getting a spare switch. These machines are not very good at keeping the insides that clean!
@@peterpeterson9903 yes, we have. Sensor don't like to get wet. We are here if you need anything. You could also go on our website for further information. maticoffee.com I'm happy to hear it's working!
Hi can you please be more specific to which clip you are referring to? Please let us know. You could also go to our website, for any further information.
Had a lot of trouble with water only dripping out the nozzles. Cleaned the infuser regularly but always went bad again soon after. Applied much more silicone as per this video and seems much better. Still getting coffee mush rather than a dry puck but one thing at a time.
@@MatiCoffeeIncElkGroveVillage Problem solved. The disk on the top of the infuser is not decorative...it has tiny holes which on mine were all mostly blocked. Normal cleaning doesn't unblock these holes unless you pay attention to them. So, holes cleaned and working perfectly again. Thanks Mati
Great video - no 5 minute intro, groovy music, and all the facts. I've serviced mine before, but this was a great reminder. These are great machines, and if you're prepared to get your hands dirty it will last 10+ years. Mine has made 12,000+ double espressos, so a deep clean and lube every 6 months doesn't seem unreasonable.
i know Im asking randomly but does anybody know a tool to log back into an instagram account? I was stupid lost the login password. I love any assistance you can offer me!
@Royal Makai i really appreciate your reply. I got to the site thru google and I'm trying it out now. Looks like it's gonna take a while so I will get back to you later with my results.
Maaaaan! get out of here with that annoying 1920 music! We like to hear human talking to us. If you want to post a video, please try to connect with your audiences. If I want a music I have an iTunes. Talk to us bro so we can listen and watch your stupid video. Just to let you know that I have only watched 21 seconds and I hated it because of the music.
Can you please take a picture so that we can see the model of your machine and the placement of your brew unit and email it to info@maticoffee.com. Once we receive your email, we will be able to better assist you. Thank you!
