Hi, I do have a question. Other machines you can do repeatable engravings by simply pressing a button after swapping out a piece. Can you do the same with this?
Great video! You added a Ruida 6442 panel - so presumably your unit arrived with a RDC6442 controller. But there was mention of an Onyx-R that had a (Ryxon?) KT332N(Z) control board (on a website that you had linked in a previous video). Any thoughts ? Thanks!
Thank you for your review on the Onyx-R. I have a quick question regarding the control board used in your (newer) Monport Onyx-R. While specifications in the online (pdf) manual note that the Monport Onyx-R uses a Ruida 6442 control board, this manual has some some references/mistakes that point towards the older Onyx. You have upgraded with a 6442 panel (with a nice case), but some online references for the Onyx-R have stated that their units have a KT332N(Z)? Any thoughts? Thanks again!
I read somewhere that this comes with the air gadget (I forgot what it's called 😂) and honeycomb tray, which is included in the price. Whereas other similar machines you have to buy separately..is this correct? This machine is pretty good looking though lol
Yes, it would be important to read what is included with any laser before you buy. This is considered an 'all in one' which includes just about everything you need. Wonderful machine!
Do you have any plans to upgrade the nozzle, to like the one by DSADVANTAGE? Not sure if anyone has yet verified it fits/works with the Onyx, only the Polar and Gweike.
They will not work as the hole is larger on the ONYX. I have an upgraded head to test, but I will have to modify it to fit. The stock one, and the autofocus are so good I am hesitant to change it. But I imagine with my upgraded air I might be able to get some deeper cuts.
I've had a terrible experience with this machine so far. Mine came with coolant everywhere because the reservoir cap wasn't tight and it clearly got knocked around in shipment. Anyone know what coolant they use? I need to replace all the fluid that was lost.
I just added some distilled water, but if you have it in a place that will freeze then better hold off an get some fluid. You should be able to find which kind on the FB forum for any of the desktop Co2's.
An item that has me leaning toward the Roly is the switch that will take the 30 watt laser and turn it into a 10W for finer detail?? I'm new to this whole topic but this seemed like an overlooked positive for the LaserMatic Mk2
If you watch my many videos on the LaserMATIC you will get my feelings on this. If you do engraving it is probably SUPER important (I just don't). That said, Roly makes an amazing product and I see no reason not to choose it (after watching my videos).
Great! I love this one! I've been using the Monport ONYX 55W desktop CO2 laser for a few weeks now, and I'm really impressed with its precision. It's easy to set up and the engraving quality is just what I was hoping for. The software integration has made my projects run smoothly!
Well, unfortunately there is no cheaper laser to do acrylic. You can look at the xTool P2 but that is pretty expensive. There is no perfect option that I know of.
@@radiant4682 Of course make sure you use my link and my big discount. Please keep me posted on how things go for you. I can't help you with everything, but I can make videos for some of your questions if need be. Thanks for the love!
Thanks man! You just earned a new Sub. Ive been on the fence with this as its my 1st Laser and i want to get it right. I thnk this will be the o e. Thanks again
I have to thank you for your content. I got an engraver for my daughter, but have some ideas about things I want to do for myself that required a lot more power. I've watched enough of your videos to get a feel for what I needed and this video helped nudge my decision to doing it now. /edit Your code actually saved me $807 on my order(s), which was better than their current sale on the machine I wanted. Truly appreciate it my guy.
Hey, when i make a 2 patterns like boxes. How can i connect 1 side of them say top of one side and bottom of the other. and group them and delete the 2 middle and top lines ?
I am a beginner I have everything money can buy as far as Diode Lasers (Atezr) , CNC (Foxalien), machines, 3D printers (Bambu) but my greatest purchase was the XTool P2 and boy has my acrylic cuts and making things really take off. For me its all great and learned so much but now its all CO2 P2. Just having a blast and of course working on all my equipment just to stay on top of it all. But to be truthful at this point 1 machine at a time. I cant keep up running the P2 and try to start up the Bambu. I will just keep it idle and maintain it all but need another garage now! Winter will be coming and wont have room for the snow blower! Maybe take the car out of the garage? NOT!
Yeah, I am glad I honed my skills on the diode, but I am truly having a blast with the Co2. It does take more time and maintenance, but when it is right, it is so much fun!
After watching all your Roly videos I just pulled the trigger and purchased the Roly LaserMATIC MK2 XW 30W. I plan on using it with my leather making. It was a little more than I wanted to spend since I just purchased the xTool F1 Ultra a month ago. I have a couple years till retirement and would like to have a business going by then to earn extra income. Thanks for all your videos, Keep them coming!
@@ValleyForged I wasn't sure if I ended up using you link or not so I emailed Roly and told them your videos convinced me to purchase the LaserMATIC MK2 XW 30W. Here is what they sent back. Hi William, Thanks for choosing the LaserMATIC Mk2 XW :). I've added order #4831 to our affiliate conversion spreadsheet under Eric/Valley Forged. Cheers, Leo
@@user-ii7jw8wd9i That is super nice of you! I just want Leo to know I appreciate his lasers, so this is why I really care. You went far beyond what was necessary. Thanks again, and keep us posted on your progress.
I don't really like either. Basswood is great if your laser is not very powerful, and baltic birch is just so...common and boring. But I do use it sometimes when it makes sense.
Your tips are very good, but you forgot to give a little reminder about the xTOOL D1 10W, 20, 40W. Of course, the focus of the video was not to mention laser brands!
That was intentional as I don't really recommend an xTool to most people for reasons I explained in this video. But they are good lasers if you know you want XCS and are willing to pay the xTool tax. Thanks for your appreciation.
I'm doing a review on this machine now and agree with everything you've laid out about this machine. It's so close to being a great machine but it just needs some tweaks. The focus lever alone is so much nicer than a lot of others, but I find myself going back to the ACMER P2 when I actually want production piece or just turn back to my CO2.
All of them should get 10% off with VALLEY10. Just use the link for the ONYX in the description, then look for what you want. If it does not automatically give you the discount, add the VALLEY10 as a discount code. Let me know how it all goes. :)
This is such good advice for a beginner. There are lots of RU-vid channels encouraging folks to start with a laser costing $4,000 to $10,000 (Glowforge and Aeon influencers come to mind). Starting with a 20 or 40 watt diode laser makes so much more sense for most beginners. As you mention, the possibilities with diode lasers are almost endless. And if someone starts with a diode and later decides they need a CO2 laser, they can keep the diode as a low cost second laser in case the CO2 needs repair but they still need to get some critical work done.
I have a longer Ray 5 20 W and love using it. Mainly bought it to learn and get some experience. I would love to upgrade to a CO2 for my next laser. Any recommendations? Im interested in doing clear acrylic and maybe thin metals, and larger wooden pieces.
Well, you can check out the Monports and get 10% with VALLEY10 (use the link in the description). But if you have the money, Thunder Laser would be my pick (but more for business). As for cutting metal, that is mostly a gimmick with most C02 lasers. I would do plasma.
Yeah, tough call. Unless you are sure you want to do transparent acrylic (for that extra $2k), then I would do the S1. You notice Clack Shack only uses his P2 when doing acrylic, but uses his Atomstack for everything else? He doesn't need to clean his lens every few hours with the Atomstack.
