ARCtv is the official home of Arc Audio on RU-vid. Here you can find installation how to's, tech tips and much more. Specializing in audio amplifiers, speakers, subwoofers, sound processors, equalizers, and electronic crossovers, ARC Audio has formed itself into the industry’s leading company for USA designed audio products. Be sure to subscribe for all the latest from ARC Audio.
If you run the at module there's no reason to tune in the input dsp part correct?isn't the dsp input for the final coming in.you shouldn't have to eq that should you?
It's a separate panel in a basic shadow box style config mounted to the metal opening between the trunk and the back seat and then the carpet is pulled over the edge and under factory panels backed with tac glue (not permanently glued) to make it look molded. The box is stand along and mounted with a bent piece of metal to the floor and then trimmed with cheap 1/4" Masonite and a little bondo to blend the edge and then carpeted. Lighting was purchased from Amazon for about $12.
Hi Fred! Great work! I wanted to know if there were any rear speakers? If so, which ones? What are the 2 Nighthawks powering & watts going to each speaker or woofer? Thx! Hope you & your family are doing well!
There are 2 night Hawks in there. Because I wanted to make sure he had the ability to test just about anything. I wanted to drop into it subfor wise, so currently post. Show open Canada. It is now running one nighthawk per sub, simply as an abuse test for the subwoofers. At the show, it was one night hawk for both subwoofers. The vehicle still does have rear speakers in it If he ever wanted to have some rear fill, but as he said completely not in his interest at this point because he likes what's up front.
Thank you. I'll be around the state doing some demos. And trainings over the next month With the jetta, but he leaves for school and of next month and the car will be gone till he graduates college.
In what world is this "affordable" for a teenager? Those amps alone have a MSRP of over $3k combined. Plus the rest of the system and materials. I love my PS8-50, therefore I love Arc Audio. Also, there's a review of the PS8-50 and it fell short of it's power ratings. And when I say it fell short, it was very minimal. 46x8/187x4 (8ch/4ch @ 4 ohms), so at least the version before didn't put out more than rated, but I'm not overly concerned with that. Love the products and also the customer support. Keep it up!
Compared to a lot of systems that are out there delivering what this car has been able to accomplish sound Wise it actually is very affordable. Without the addition of the secondary sub amplifire for testing purposes it was a 6k target.
And I will mention This was more of a father son project than a marketing project. Although he loves the way it sounds and is still trying to figure out exactly how we got it at the sound the way it does. I am positive at his age. He still truly does not appreciate what he has at his fingertips. As I mentioned in the video, if you can do it, show them how to do it right from the very start.
@PureSQNut and please don't let my comment take away from what you guys did. I love that you two did it together. And you're assuming him in the right direction. He's lucky also that your product line is very reputable at SQ. I did the same with my son about 8 years ago. They never really Tyler know what they have, especially in your case. I love my PS8-50 and couldn't be happier with it.
@@PureSQNut and honestly, with kids and the way things are today, a $3k budget is more the reality. Still achievable with what's at his disposal. Blackbird and do either 2-way front with rears or 2 subs, 3-way front with no rears and a single sub. It's a great install nonetheless.
The illusion Audio carbon C10 10”subwoofer is no longer being made. It’s very very well known in the SQ SQL world of automotive audio. I found this SW line that looks a lot like the illusion. but it’s a 12”. Any word of a 10” SW subwoofer being produced?
for a 4 channel connection with a PSM does the PSM only need channel 1&2 as the input and use channel 1/2 & 3/4 as outputs? or do I need to use input 3/4 into PSM to use 3/4 output from PSM
@arcaudio, I already have a PSM Pro installed in my 2015 Ultra Limited. I'm using the Biketronics breakout harness, with a Focal amp. Can I purchase your wiring harness and maestro module to clean up my setup?
@cdnaudioguy Agreed. Pretty much HOT GARBAGE w/o the Maestro. You might be able to correct most of the stock FR above 100Hz with the DSP, but you're not going to have REAL or accurate Bass w/o it.
Hi. My system 1000.6 dsp ips8.8 for 3way front + x21100.1 and subwoofer and BTD + Psc controller. I need more 3 way speaker for rear, Can I add Ps8pro + 6channel ampl for 16 channel active ? So I can play music with btd or aux 3.5mm jack direct in one system with 16 ch active. Thank you arc audio 🙏
""maximum transparency and natural uncolored sound"" which car are so quit that your hear for like 1000$ the f*cking tranparency+colored you can imprison your self with your car in your garage or you go to living room and hear on real sound system 🤣🤣🤣🤣 it's amazing everytime to talk about high end fidelity in trafic noise 😆😆🤮🤮
Love my ARC amp and speaker 🔊 over 5 years on my 15 RGS never failed me still hits hard , I’d love to up grade to this new amp DSP with more channels so much more potential y’all are listening to the demands of today congratulations 🎊 👏🏽 It almost looks close to AUDIO CONTROL amp DSP in one, Only thing the price 🫣😵💫🥴 I’m scared to ask I hope it’s affordable to the average joe , 🍻🥂
Thank you for the great video. Do the new 2022 Harley Davidson Road Glide Limited come with a PMS installed from HD? Can you play some music for the sound? Thank you again for the video.
Great Video !! Please keep making more such informative videos. I recently did a KEF Q150 Bookshelf speakers review onmy channel. link for your suggestions & to learn from you, ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IasdvlDNzJw.html
I had a few additional questions regarding installation of the MPAK14CX kit with the new CX6 speakers on my 2021 Street Glide (which also has rear bag speakers). So I sent an email to Arc Audio asking for help. I got a call back in less than 2 hours with a ton of helpful guidance and advice. It's not often you get this type of direct, expert advice from a vendor; but Arc Audio seriously delivered! A big shot out and thanks to Arc Audio for making my day!
U R AWESOME!....U R PERFECT ON HOW YOU EXPLAINED IT<THAT WAS PRFECT ON HOW YOU EXPLAINED IT, ITS RIDICULOUS!...I JUST HAVE REALLY SIMPLE QUESTIONS BUT OTHERWISE THAT WAS AWESOME !...GREAT JOB , John S from Boston, MA
Hi, thanks for the informative video. While correcting the delay between drivers on a 3way system like in my case, the LH Midbass is the furthest driver followed by tweeter and the midrange. What should be the sequence that i should follow? Shall I delay the tweeter group with respect to the Midrange group or.....
