I’ve been going to sidari for 8 years in a row now and every year gets better there’s always new things to do and even if there isn’t the night life is amazing not to mention the views you can get either from your hotel or in a restraint down the strip to anyone thinking of going to Corfu sidari I 100% recommend it, honestly it will make you want to go again and again by far my favourite place to go and always will be
Hahaha poor guy,, I had the same problem and the problem is not the device it was my internet. Let me explain the password was correct my computer and cellphone was working properly but when I check the speed of the WiFi I only have 13 % of the speed that I suppose to get so my internet representative send someone to fix my internet and my cámaras are now working properly.
Had this problem then I watched and thought I was screwed so I decided to call the support help and he walked me through it all and now I back up and running. Reset router 3 minutes Reset cam Unplugged module hold reset 30 seconds plugged back in while continuing holding the reset and all is well. Hope it helps
I have tried everything, no way I unplugged my router obviously reset it 1000 times and made the password literally the easiest tried everything. This system pissin me off
@lambertainment9618 I just got mine working after hours of resetting and unplugging. I put the module in sync mode (blue flashing light), then connected to it outside of the app, just in my WiFi settings like I would connect to my router, then opened the blink WiFi settings and changed the MAC type from random MAC to phone MAC. Then went into the app and the set up just worked first time, hope this helps.
I am having this issue currently 4/10/24 - Spectrum is my internet provider and I recently upgraded equipment specifically my router. This being the case of course any stored history on my old router would have been on this has now been deleted or destroyed in the updated new router. With this being said as a result now my Blink system is failing. I have tried everything in this forum BUT what you mentioned about " I was instructed to unplug the sync module, using the paper clip push and hold the reset button while plugging the sync module back into power." - if this works.. you're a life saver and certainly appreciated. I will update with my results later to see if this updated firmware and got my sync module to connect.
I was instructed to unplug the sync module, using the paper clip push and hold the reset button while plugging the sync module back into power." Thanks my friend .....
This tracks because mine won't reset wifi and I've tried everything. When I emailed me they suggested the same things I already did. Then when I let them know it didn't work and I tried those, they sent me the exact same email, so I was, like I said this didn't work, so they sent me the same email AGAIN a third time, exactly the same. I guess your solution is the one i need.
I searched and searched for solution then yes i found it, It upates your firmware. I changed internet providers and Blink wouldn't work on new one, but this worked first time. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-T42JGWuN1Cg.html
Mine is doing the exact same thing... "wrong wifi password" -- when I KNOW it's right, I'm using it on 4 other devices.. So I know the password is right. Blink is trazh
I thought the sync module died, I bought a new one. The same crap happens with the new module. I thought it was the router. I bought a new router. The same crap happens. This sync module sucks.
Exactly what happened to me. I thought I was going crazy with the wrong password message. After watching this video I bought a brand new sync module 2 and everything works.🎉
I was in the same situation and considered this method. After a few deep breaths I collected myself and called the tech support line. During the call the blink app froze. I uninstalled the app and then reinstalled it. The app was now functioning smoothly and I was able to get the system up and going. I think the app was the culprit and needed a fresh install. This is worth a try before resorting to BDH. (big damn hammer)
Qué falta de conocimiento. Se cancela ese sync desde la aplicacion del mobil y se adiciona otra vez con el mismo nombre desde la aplicación del mobil siguiendo las instrucciones. Me funciona perfecto y este lo acabó con el martillo...je..je...
Loved your video!! Very concise and to the point. I did learn that the extra tool is really not needed because I was at that point too. The real issue is that you must use the same network that your phone or device is on for the network you are trying to connect the Sync Module to. They can't be on different networks or it will say "incorrect password". It won't tell you that you must be on the same network, that's too convenient. So, no need for any extra tools.
I have had my blink system for a couple of years now and I am aware of cellphone having to be connected the same wifi network that you want to connect the sync module to. My sync module suddenly no longer has the ability to acknowledge a correct PW ─ seems that the only fix is to get another sync module as I have tried many fixes including deleting and re-adding the sync module. At this point it seems appropriate to use the hammer method. Oh my bad ─ I didn't delete the cameras first!
We apologize for the weather, but we are sure that you enjoyed your stay, and hopefully we will meet again one of these day's, maybe in downtown Warwickshire.. 😁🤣😎
Mr Paul we absolutely loved our time in Paphos and if you do come and visit good old Britain, please let us know and we definitely grab “that coffee “ ☕️. 🫶😉