My single rear motor bike goes 35 mph .. 😊1,000 watt 52V. What they really need to do, is a model with the 1,500 watt 60V and 45 amp controller. They could stick a 40 amp hour 60V in there. Perfect!
@@GiRides no don't apologize, i am sorry, I just thought you were reading the letters on the bike wrong and thought maybe the W just looked like a V to you.
Have you had a chance to take it off road on some trails. We have and it just crushes it in awd lightning mode. Big hills no problem. we are really liking our wallke H9 bikes. The build quality is great. Only upgrades we have done is swapped out the factory seat for a bluewind noseless seat and a suspension seat post and now it's like riding on a cloud. Mid 30's mph is plenty fast. great video btw.
This sounds to me like the controller is modulating the duty cycle of the front motor using PWM and the pulse width should match the cadence of the skipping. Take a look at the effects of PWM on lighting and the flickering that it causes. This is the same effect but on power output to the motor. If this is the cause it would require a firmware update or settings change to the display/controller to reduce the width of the pulse. It may be a hardware limitation.
The wheel with the rotational weight of the motor plus the shock makes it do a skip while going at higher RPM .. play with the rebound on the shock or completely replace the tires with heavier rubber compounds and that skipping sound goes away … I own a H9 and I also have done a few repairs on it …. New tires help and you might want to address the rear brakes … caliper sits high so the 2 spacer washers need to go to fit properly
I have the H9 the front motor is not 1000w motor It is 750w and the rear motor is 1000w. The owners manual points this out on page 9. The AWD system is 1750 watts total. If u drive with front motor only u will notice a drop in power due to the smaller motor. Regarding the noise in the front motor, many other videos have gone over the noise in the front motor and a few have spoken to wallke directly. It’s been explained by Wallke engineering department that the noise in the front motor is a normal function for this bike. To date I haven’t seen any information about the front motor failing even though it sounds different than we’d prefer. Maybe since it is a new product bike time will tell if the motor fails in the future. But for now Wallke and bike owners say everything is operating normally.
That's just the way hub motors sound. Nothing to be done about it. Just need to get used to it. To be fair the tires make more noise at high speed than the hub motors do. Unless you plan to take it off road I'd get more street friendly tires. Also when your street only I'd just turn off the front motor or disconnect it as its pointless to have awd on the road.
You probably can’t hear that pulsing sound in this video, i have many ebikes and not a single one sounds like this. Rear motor sounds right and the issue is only with front motor or controller
@@GiRides Actually as I am visually impaired I hear more than most, and while I do hear a pulse I have heard it in many other hub single motors. Especially when the tires are of a poor quality and their weight isn't balanced. As far as AWD bikes I personally have never ridden one as I have never seen the need as I only ride street. My comment still stands though. if your on street and the front motor is annoying you turn it off. After looking at the site for this bike its easy to just put it into FWD or RWD mode. I would say try the AWD mode in an actual off road environment and see if it stiil does the same. THEN complain about the pulse? Cancel Reply
@@kurt9381 without actually riding this bike (as I can't afford it, but having experience with hub motors in general) I chalk it up to 2 things. First is poor tire quality as I have seen single hub motors and even mid drives (that I currently use) do this with poor quality tires that are not balanced, or the two motors are fighting each other. I can't see this as an issue on dirt/snow/etc where this would actually be useful, but on street AWD should never be used. After looking at the site this can actually be disabled.
@@whitepawrolls I own this bike and it’s 100% cheap tires … I put Ultraverse tires with Tannus tire liners and that skipping went away … newbs are funny
not 100% sure but the wife and i both have the h9 awd, Both of our bikes do the samething at high speed. has not effected the ride quality, but can definetly hear it skipping. I have come to the conclusion that seeing the front end of the bike is lighter than the rest the front wheel skips at higher speed? We are completly happy with the bikes 60 miles in at this point..
I have a lot of experience riding ebikes and escooters, the issue is controller, it is programmed to send 22 amps to rear motor and 18 amps to the front, this is why we experiencing this crazy skipping noise. I can be wrong but this is my thoughts
Ok, so last night I took the H9awd on a speed run both motors highest setting. sitting in the normal fashion I experienced the front wheel skipping sensation we have been discussing. I found that if I leaned more forward ( crotch rocket mode ) that extra weight on the front end eliminated the wheel skip. ???
@@rockysambrano8435 Go for it! We love our H9's. I have had this bike for 2 weeks it is the 48 volt battery option with 1000w front and rear hubs. I ride aggressivly at times as well as using pedal assist. I currently have 66 miles on the bike and battery showing 40% I have yet to charge our bikes. I believe i will have 80 miles plus on one charge. the 60v battery I imagine would easily be over 120 miles with my riding style. We have taken these bikes on wooded trails in awd no problem. In awd highest settings I don't think the avg person will find a hill that this bike wouldn't conquer. JMHO
I’m not hating on this speaker, & I’m sure that it sounds good. It’s just the price. They’ll have to discount it for one main reason. The W-KING X20. The X20 retails for $319.99 but it’s been marked down to $224.99 since launch. This is a problem for Soundcore. They waited too long to come out with a speaker that’s louder than 80 watts. I’ll give you another example: DB SOARS F29 Max. This speaker retails for $199.99 on Amazon, & as of right now, there’s a $10 coupon, making it $189.99. That speakers rated at 100 watts & it’s a beast. It also has a 30hr battery life. There’s a lot of competition in the market. They’re going to have to drop the price.
Yes yes but it is not louder at all, i compared it to many speakers i have on my channel and it sounds bad, bass is very poor, it is not worth $250 at all but it looks good :)
@@GiRides Yeah, on the day of its launch, I knew something was fishy. There must have been 15-20 different RU-vidrs reviewing it. The bad part is, I didn’t even recognize at least half of them. It just goes to show you how desperate Soundcore is in pushing this speaker.
I've had mine since a few days after they released it on 5/29/24 and I dig it. So far it kicks my recently purchased Bumpboxx Ultra (NYC graffiti) and I was pleasantly surprised at how good the bass of the Boom 2 Plus is against it. The Ultra IS louder as they claim it is, but with lousy bass which also surprised me.
And when you put two Boom 2's paired together in tws about 10 feet apart, the soundstage becomes huge with super wide stereo separation and immersiveness. They blow the doors off of one Boom 2 Plus.
PLEASE READ: This speaker has too much distortion. Play the song wine pon you by Doja cat in SoundCore’s signature sound mode and at max volume you will hear distortion. It’s the cross over from when the high bass drops down to the low bass (sub bass) that I hear distortion in her voice. I tried to eq it to fix the issue but that didn’t seem to help. I turned down the bass when I EQ’d it and of course I still heard distortion.
This speaker has too much distortion. Play the song wine pon you by Doja cat in SoundCore’s signature sound mode and at max volume you will hear distortion. It’s the cross over from when the high bass drops down to the low bass (sub bass) that I hear distortion in her voice. I tried to eq it to fix the issue but that didn’t seem to help. I turned down the bass when I EQ’d it and of course I still heard distortion.
Si se aprecia una claridad y más matices en el JBL. ¿Qué difencia hay entre el BB3 Sin wifi y BB3 con wifi en sonido?. El soundcore está en 199€. el BB3 wifi en 599€.
Quality over Loudness, you should also consider this. For sure JBL is more louder than tribit. But if you match the loudness of both, you will see the quality of 2 speakers so tribit can on par to the boombox 3
¿Cómo es posible que el soundcore suene como si estuvieran sus altavoces obturados?. Suena como si estuviera metido en una caja, como si algo impidiese salir bien el sonido. No lo escucho limpio. ¿Enserio suena así?. Tengo el BOOM 2 y suena muy bien el altavoz pero me quedo aparentemente decepcionado con el BOOM 2 PLUS. Evidentemente el X20 es más potente y tiene 5 altavoces dedicados pero el sonido del video en mi opinión escucho demasiada diferencia. Parece que el BOOM 2 PLUS es solamente un subwoofer y ya está. No sé, es extraño. No lo entiendo.
Yes it sounds really bad, boom 2 sounds better, much cleaner sound. This is a big fail on this boom 2 plus, i think new software update in the future maybe fix this bad sounding issue. Going to make a new video today vs Boom 2 and will see how it can compete. Even my motion 300 sounds better to be honest
@@GiRides Es un gran problema. Esta noche sale en pre venta en España y pensaba comprarlo. Ahora tengo serias dudas de si merece la pena. ¿Crees que es problema de software del propio altavoz?.
@@OskiitarGyM to me it is the worst sounding Soundcore speaker from all the soundcore lineup. It just sounds cheap, bass not deep enough. Maybe i have a faulty unit i don’t know what else i can say. I just hate how it sounds and returning it soon. EQ helped a little bit but the video already made with adjusted EQ. I would stay away from this speaker if you like a quality sound! Original boom plus also sounds a lot better
@@CALISUPERSPORT I just got it from Amazon and there was a coupon check box that brought the price down to $224. What a great deal and am loving the W20!
@@GiRides As a single unit, Soundcore, naturally, sounds wider and bigger than Micro 2, but I'm about to get a second one, mainly for cycling. In stereo it'll be perfect.
can buy this now for 1000.00 pounds but after looking at the performance all my dual motor scooter are better , my p1+ hits 35mph within 7secs 40mph in 10secs it goes 45mph just bought a new one 55mph i paid 1400 pounds for it waterproof ip66 60v 26ah 3600w peak power 5600w my next step is too buy a 72v scooter as i want top acceleration 75mph speeds and all that can get too when i learn how too change controllers to higher ones would love too make one 134v like the bull scooter
I played this video on my sonos play 5 gen 2 and feel the soundcore has slightly better clarity but not as much boom as the w-king x-20 and the w-king x-20 sounded louder.
The Tribit is better for indoors due to the sound signature of the speaker. The X20 is definitely designed for outdoor use because it gets extremely loud without losing sound quality. Which is what you need in a good outdoor speaker.
Just did a trial to knock the pin out. There is a thread in each side of the pin. I used a piece of 10mm wooden doweling. With a rubber mallet. It worked. Please don’t use anything metal. Bolts threaded back in perfectly.
Blast sounds better and has deeper bass up to about 70% of volume, on max volume boom 2 plus has better bass, there is no perfect speaker at this time but the winner is JBL boombox 3. I have a new speaker coming tomorrow w-king x20 and will do a couple videos. I expected a lot more from Boom 2 Plus, it is not worth $250. Sorry :)
@GiRides you might want to check out the new Sony Ult Field 7, its a Boombox 3 competitor and from what ive seen its louder with comparable bass and MUCH clearer mids
