Welcome! See our family building Legos, having good family fun, and making memories through our RU-vid Network.
Our network promotes a positive environment for our kids and adults to learn, grow, and earn confidence through social media. Our channel highlights our kids with products they earn and the fun activities they participate in.
We like to build Legos, Solve Rubik's Cubes, Play Video Games, Minecraft, and More!! Leave us a comment if you want to see something more or have any questions. Thanks for watching!
How to burn a circuit board like a noob, get a hot mess of solder everywhere, and risk failing at your intended task. Please use a desoldering iron or desoldering braid/pump when the contacts are that solder heavy otherwise you risk damaging the board which may need bodge wires to fix the damage. Always clean the surface after removing components before reinstall. Also if you intend on removing a good relay to use elsewhere, this would likely destroy it.
Thank you for the detailed video and explanation! I was able to get my reverse osmosis system working properly again without having to pay the $100+ service fee charged by my water softer company. I used a bicycle pump to re-pressurize it to a PSI of less than 10PSI. I didn't have a pressure meter that could measure smaller amounts, so I used the gage on the bicycle pump. My tank had a Max PSI of 100, but from advice on a similar tutorial video, it said to keep it at between 5-7PSI. Thank you!
Universal guest services is horrible. The wait time is ridiculous and they have nowhere to sit for people with disabilities. And they usually have one person working. I was disgusted how long we had to wait with my adult son with autism.
My pole saw from them got used 3 times and the motor shaft began to spin inside of the drive gear. I managed to tear it apart and put superglue inside of the gear and put back on. Let's see if it holds. Likely my last worx transaction.
A plastic gear spinning a metal chain intended to cut wood. Tells you all you need to know. They suck. Weed trimmers are good, pressure washer good. Anything meant to cut wood, avoid!
Okay so do you need a new fuse if the fuse isn’t burnt . Well mines don’t look burn at all. And I did test the door and the fuse and all sounds good so idk what to do
at the 11:09 mark you fail to mention that when you pressurize the tank, you have to close the top valve/faucet, for the pressure to stay in the tank no?
Super helpful my guy! My dad and I were trying to figure it out for the last few weeks until I decided to look it up instead of fumbling around troubleshooting. Hope you’re doing well!
Yeah, I could see benefits if you are using outdoor lighting. Your ring camera could be set to detect motion and then turn on a specific group of lights.
My model is the one Walmart sells for 50$ every Black Friday!! Mine is loud and seems like the motor is whinning after I tried making a smoothie it was too thick and now the motor whines a lot
After seeing many other videos describing how to do this work, yours is the first one I have seen that shows actual DIY in getting up to the ceiling and doing the real "hands on", instead of using a tabletop model, and what to expect during the work. Thank You so very much! I want to install three ceiling fans in my house, and I don't know what's inside yet, but you have given me the confidence to tackle this job and do it right!
Thank you so much for explaining how the ends slide together! It's my first time doing a project like this and you saved me. Takes some patience because it is a little tricky, but it looks good so far.
Dear BB Kids, Thanks for the video. My tank says max. operating pressure is 100psi so I don't understand how 7.5 approx is enough. Would you be kind enough to advise me. Many thanks. Greg.
U guys just saved me .... Thank god for utube an the homeowners an craftsman that share their knowledge.... My next weekend project as i purchased the same product ... I would have ben smashing the ends with a few f bombs if i didnt reseach this ... U guys rock ..
Very helpful video! Since you didn't show it after multiple times of showing it, what was the final pressure read before turning the water main back on?
This guy didn't do it correctly. You're only supposed to run the spigot until the water stops flowing, then check pressure at Schrader. Here's the right way... Re-Pressurising your tank. Turn off feed water supply to RO. Drain the old tank completely thru the spigot. Close the tank's valve located at top. Disconnect the line from the tank valve. Locate the pressure valve under the blue cap on the tank. Use a pressure gauge to determine the pressure in the tank. Use an air compressor or bicycle pump to re-pressurize the 4-gallon tank to 5 psi and 7psi for the 14 gallon tank. Reconnect the tank line at valve.
I'm sry, I think maybe the most important step was skipped. Getting the top off. You mention lightly about something in the back and then jump into dismantling. I dunno...
Would it also be possible to use one of the Ring plug-in mount kits for the Ring Floodlight Cam to make the Ring Smart Lighting Floodlight plug in as opposed to hardwired? It looks like it should be possible, but not entirely sure
I bought one 18 months ago. Gave it to my daughter as a house warming gift! She used it 90 days……..this thing was $149 bucks! I packed it up and she never sent it back to MFG. …….now she is moving and found the NINJA😮 I am watching this video now because I brought it home with me and am determined to get this damn thing fixed! Thanks for all the help❤❤❤😂😂😂😂
That’s a really clever idea for enhancement. We have our scope so wide on ours for the area we are monitoring so it doesn’t really impact us. But motion tracking versus motion detecting would be great. We have a Ring flood light and it doesn’t even do that. I like the suggestion!
Found u from pantry door. Love it, doing it this weekend! Your videos are great. Great dad, great kids! Keep it up. More DIY more DIY I just bought an old house lol
Thank you so much for following and the comment. That pantry door has been a big hit and an update my wife has had me do on many of our closets now. We just finished up a bathroom renovation so we’ll have some more DIY soon. Thanks again for the comment!
