Didn't you disassemble it to remove to IR filter? I made mine like 10 years ago and I did not wanted to disassemble my PS3 eye, so I'm using red LEDs in parallel with 250 ohm resistor to dimmer down the LEDs so I cannot see LED reflecting on monitor.
Thanks for the comment and yes, I did disassemble PS3 eye to remove IR filter. I watched a few youtube videos for instructions but even so it was a cumbersome job. I didn't know that you can make a head tracker using your method. That is interesting information, thanks.
@@hekka7270 I didn't know either till searching for a headphone clip model I found this eurotruck player vídeo where he used a single white 5mm LED conected to a coin battery with eletric tape and all attached to his hat plus freetack software. The guy said that a red LED would be less noticeable.
Awesome project! Better project I've seen so far using an old joystick. No need of F***ing 3D printer parts. I have one with broken rudder and I was thinking in fix it with hall sensor but your project its far more interesting. Maybe I'll do something similar. Thx for sharing.
Hi! Did you check my pedal mod video? Maybe it has some useful information for you? (I'm going to write an update text in it's description anytime soon.) I have now a new program for the joystick and it's more effective damping jitter down. I will gladly email it to you if you want a copy of it (my email adress is hekka.diy.videos@gmail.com).
Insane mod! Why not make a steering wheel mod for the driving force gt like a gt3 or a formula style, that will be a very good video, like cuting the original steering wheel and 3D printed a very cool one
Thanks! I have (very hazy) idea of cutting DFGT steering wheel so that it looks like yoke and using some kind of slide building aeroplane controls. DIY force feedback controls would be cool but probably out of my league.
Hi! I wish people would offer broken or obsolete items for sale instead of throwing them away. I made a new program for modified joystick and it's more effective damping jitter than older one. If you want a copy of it I will gladly email it to you. My email address is hekka.diy.videos@gmail.com.
get a teensy it has a flight controller, joystick, mouse and keyboard USB profiles makes building these things easy, also 40 odd pins for the button stuff
Thanks! Now I have hall sensor and Arduino controlling joystick's Z-axis (along with pedals) so I can use joystick's twisting axis the way you are suggesting or maybe controlling landing gear :) (I made a short video about Z-axis using hall sensor)
Nice tutorial on Joystick! Wondering if any custom PCBs and 3D printed part may help? Would love to sponsor and reach any potenail collab together! (PCBWay zoey)
Hi Zoey! Arduino pro micro costs only 5 euros or less (including shipping) so it's probably very difficult to save any money using custom PCBs ? Parts are so simple that you don't need 3D printing, but maybe it's worthwhile to use 3D printer for some hall sensor holders (X and Z axis). I only needed saw, drill, file, soldering iron and some simple tools (and a few beers) :)
@@hekka7270 Thank you for sharing pal. Got your point, and from the other perspective, we might help if a one-piece finished product you'd like to achieve. Btw, our sponsorship is open to any of your other projects as well! 🍻
Interesting chair hold down solution. I guess you could also place stoppers under wheels and also use something that would lock seat piston top and bottom against rotation. There is also a sim replacement chair piston with a toggle for that, for sure modified from a standard one in some fairly easy manner, if one were to just figure out how.
Sorry, but it won't work. I tried to use Logitech electronics (and no Arduino), but the potentiometers power voltage (almost 5V) dropped to 0.5V when using hall sensor (replacing that potentiometer). I even tried to "rob" the voltage directly from USB line, but then the voltage dropped to 1V. Same thing happened when I was testing Logitech Attack 3 joystick. I guess Logitech electronics just don't like hall sensors:(
They factory built-in spring has way too much tension (too stiff). I replace the spring with the spring inside a used shampoo container, pull the spring longer and expand the radius gradually with the assistance like stick/rod, now the control feeling is much softer make much more sense. Ther are some more tricks other people used, like: Cut off one circle on top of factory built-in spring to make it shorter thus become less pressure, or use heating/cool-down method to soften the tension, or remove the spring and use rubber band in 4 direction of the base tie to the center stick to make it center. But bro, non of these are comparable to your modification - Completely rebuild a half of joystick, pretty cool!
Thanks man! I like very much your "shampoo idea". Junk for somebody else but useful stuff for a creative person:) BTW: I think Logitech attack 3 joystick has same "gimbal" (that white nylon(?) device) as Extreme 3D Pro and the spring has same dimensions but the wire is thinner. I'm not sure but I try to test it in the near future.
Your tutorial is great! I am embarking a on new journey on how you use hall effect sensors and Audino to build my own flight controls. This explained a lot to me. Thank you!
Thank you very much. My goal is to use cheap parts, materials and simple tools and build something which works (hopefully) better than original version.
i watched wish you built it live include details about the board you used, what code you used, what github repos you used etc please in the video description, I think many people own 3D printers I think personally i would either reuse original body or 3D print a new enclosure using ABS or PETG
Thank You! Costs depends on how much stuff you have already. I only had to buy Arduino (5 euros) push buttons (10 pieces 6 euros) magnets (20 pieces 4 euros) Hall-sensors (10 pieces 2 euros) and polycarbonate sheets (10...15 euros). You can find used Thrustmaster T.16000m costing only 30 euros so you can't save a lot of money if any. However Logitech 3D Pro is more rugged as Thrustmaster (I have disassembled both). If you are planning to use joystick many years modifying Logitech could be good choice in the long run. For me planning and building and learning is a fun process and sometimes very frustrating :)
Hi ! Nice to know at least someone is watching:) I didn't even try Z-axis because the space is so small. However there is such a thing as magnetoresistive sensor. It probably won't need a lot of space because it works different way as Hall-sensor. I have one of those (MR-sensor) but I haven't tested it yet but i will do that in the near future.
Hi! (This is "slightly" late second replay) I tested my MR-sensor but it didn't work because it was digital (not analog) and too sensitive. But I found a way how to use hall sensor anyhow. I made a new video about it and it is on my channel.
