So.. the reason this method works.. and why u had to do this.. the little round hinged shield plate that acts as a protector to your filler neck and fuel system.. breaks off and falls down the filler neck. You can see from your video that yours is missing. If u take ur gas cap off and look at the hole u put the end of the nozzle into u will see the two hinge holes that used to hold the cover for the nozzle hole. It's a little metal piece.. flat and shaped exactly like the hole and when u push the nozzle into it.. it opens via the hinge and allows you to do so.. then when u pull nozzle out it automatically closes and covers that hole to protect stuff from going into the fuel system. They are cheap garbage and they break off and fall down the filler neck and get lodged where the filler tube meets the tank. It's nice that u can beat on it and make the thing move around a bit or just enough to open the passage way up to allow fuel but.. if it keeps happening.. remove the filler tube from gas tank and try to get it out of there .

Why didn’t you just removed the strut on its own in the front? You did so much extra work

While you are doing the top front mount bolts not a bad Idea to clean your sun roof drains that should be right under the plastic panel as well!

I LOVE YOU! it worked 😂

Ohmahgoodness! You are saving me 💰💰💰💰💰💰 through your videos!! I hadn't realized I can do this myself too! Mahalo!!

Right on, braddah! I appreciate you very much. I have an exact vehicle like yours. You helped me realize I can at least change that myself☺️. I'll be watching out for more of your videos with the maintenance of your ride. Blessings to you.🙏🙏

Perfect thanks!

We have a rubber mallet in our shop., can I use this instead of a regular hammer? Thank you

Thanks

You just saved me $1800

Thanks friend

My 2004 Grand Cherokee has been doing thi for several years. I'm going to try this. I'll let you know if it helps. Thanks !

Thank you

Nice video. Thanks!🙂

I love learning how to do this stuff myself. Thanks so much!

You didn't say how much you paid for it.

Helpful

Our jeep has been having this problem for over a year and a half now and we haven't had the money to get it checked out. But holy crap this worked!!! Thank you so much man you have no idea how grateful I am to have found this video!

Thanks for the digital reset video. Very helpful

Great video

Worked on my 2020 Jeep Cherokee

The world is a better place with you in it.

THANK YOU SO MUCH. Every video said to hold down a button. I didn’t have one. So THANK YOU SO MUCH!!!!!!

I'm going to try and see if it works. Hope it does. Thank you very much

Can you not just fit spring compressors on the front. Take scuttle out and remove top damper nut? Lower damper rod and remove the spring? Lowering spring will be shorter so will go back on with no compressors?

You have helped us out alot thank you we did step by step, my mother in law car will mo longer be going to shop for a Air filter change, thank you so much we need more videos about this car

Thank you I received order today of a pair for the same model car and I'm glad people like yourself and your video's will help make light work of replacing them.

That's not how the Brushelss 40v is designed

Thx

I had to go through a few other videos before I found yours. Digital cluster is dig than others. Thanks for the video

Thank you so much!!!

Was the torque for the 18mm bolts 52 ftlbs or nM

Hello can you help me

Thank you, replaced both supports on my 2016 patriot after watching your video.

Thanks for showing steps for digital cluster 😊

Hey looks awesome and i am currently in the same situation. I checked on ecs and eurotuning and both have the mqb kit but they all say not for the tiguan but for every other mqb. I have the same exact vehicle as you, was that the set you purchased? Any feedback would be awesome.

Thank you, this really helped

Is the 2014 1.8t Se any different to do than the 2018?

Quick and easy ! Thank you !

I HAD SAME PROBLEM AND TRIED ALL METHODS AND NOTHING WORKED I ORDED THIS 2020-2021 JEEP GRAND CHEROKEE 3.6L FUEL GAS TANK FILLER NECK HOSE OEM 68377769AB AND PAID $150.00 FROM EBAY PART CAME NEW AND CHANGED MYSELF AND PROBLEM SOLVED !!! HOPE THIS HELPS TO SOME ONE THERE !!!

Which size bagbu use in it 13 gallon?

❤❤ I cannot believe this worked. My son's jeep would not take gas, kept shutting off gas station nozzle. Thanks man! ❤❤

Does anyone know how i would attach a cts downpipe to this exhaust?

Thanks 👍

Can't get the axle anywhere near the splines with the ball joint in ?

Hello, your video is great! I noticed you gave torque specs for the rear but not the front. Could you please give front specs, please?

Having this same issue after a few times filling it up the valve got stuck again and had to tap it every time this happens.. do you know or someone know how to fix this issue from happening again? I really don’t want to carry a hammer along in the car every time this happens.

Those that tried this did you guys do this with an empty tank/full or don’t really matter?

There's nothing more sexy than a lowered VW

Didn't realize there were different steps if you had a digital cluster compared to the ones that dont. Much obliged!