Hi and welcome to my channel. I will be uploading videos that seem interesting and helpful for everyone. Mostly about some tech like drones and computers. I hope I can help you out in many ways. Thank you.
Buenos días amigos ya solucioné el problema del almacenamiento interno en mi Millenium Master pero me gustaría saber cómo crear un usuario porque en el programa me pide un usuario código de usuario dice ahí
Can u recommend me where to buy a battery on taobao?? Because my 60v 25ah nt working, i nt sure why because when i charge it is green light but when i plug in it show 0v, i nt sure is my bms burn off or dead cell
It won’t even let me try to press any keys to get into the bios settings. It just quickly flashes to the windows logo. I’ve restarted my Dell laptop 4 times in a row now and I still can’t get to bios. It does say to press f2 and f12 I’m not sure for what tho it was too fast to read. I still pressed them anyways, plus any other key I read might help, still no luck. I mean wtf why does even a simple process of accessing settings have to be so complicated????? If anyone knows what to do I’d really appreciate it. I’m using a Dell Inspiron N4050.
I feel you. The reason why they do this is because accessing bios and making changes you not sure about can cause the laptop to not run correctly. Try tapping F9 when the logo shows up. Try it..
@@dennis_503_gutierrez I just tried F9, nothing changed but thank you nonetheless. Sorry if my original comment came off as a bit rude, I was stressing out because of an approaching deadline and the last thing I needed was for my wifi to suddenly stop working 🤦🏻♀️ Really appreciate your effort.
Hey bro, awesome video. I have watched a few others that you made, so I tackled my project, which was a blown compressor, so i have some questions. If you have time, what is the best way to contact you?
Nice video thanks. I have a similar problem Bafang 750W 48V mid drive, power drops out after a slight throttle. Batt reading 52V before I give throttle then reads zero after drops out. I also hear a ticking sound coming from the inside of battery when I turn on the display…. I will open and check condition of the cells, might be one or more are bad. Any advise on who makes a good Batt. Thanks
@@dennis_503_gutierrezyou mean 25miles only ?! At what speeds ?! Talking to some sellers they claiming their 50ah will give you 120km ( 60-70miles) at normal speed ( 20-30mph ) Have you done a proper range test ?
@@rolandroland1485 I haven't done a proper range test on full battery but I did noticed how fast the battery drains the faster you go. I commute to work going 35-45mph. Distance of 30miles round trip at say 40mph I have about 25% of battery left. That's 2 or 3 lines on the display. If you go 20-30mph for sure you will get 40-50 miles range. The 50ah battery will give you around 60miles going at 30mph speed. They key is the slower you go the more range you get. The faster you go the less range you get.
Users of Motors overheating or the wires that come from the motor aren't thick enough may look at the wires on the motor cuz it sounds like you're shutting down in your motor is overheating it's getting too hot
I adjusted it about 6.5v with load. So probably 8v without load. Best to adjust it with load that way you see the orange ring when charging and you will be at the correct spot to charge. Try when is sunny and clear for best results.
@@dennis_503_gutierrez thanks I’ll give that a try as a starting point. I didn’t have full sun the day I was playing with it so I couldn’t tell if it was just the wrong voltage or not sunny enough.
I wanted to express my gratitude for your incredibly informative video. Your detailed explanation made the content easy to understand, and I appreciate the effort you put into providing a comprehensive overview. Thank you for sharing your knowledge and expertise. I'll be sure to try out the suggestions you provided later this evening. Looking forward to more insightful content from your channel!
This works a charm. At first camera would only charge 3% then go down. I then worked out the voltage regulator device was faulty. I fitted one of the other 5 in the pack and boom! Charges great. Works well.. 100% maintenance free doorbell. 😊. Oh, I drilled a whole in the rear of the housing and out standard cable through it. I then used liquid insulation tape to seal.
I'm glad it worked for you. The idea was there but everyone can improvise it like you did. Yes maintenance free door bell. Mine has been running for more then 2 years and all I have to do is clean the spider webs every 3 months 😂.
I done it today, except, I drilled a hole in the back of the housing for the doorbell to run the cable into the back of the doorbell. I also made new hokes for the screw to go in to secure camera. I fitted the screw lower than the sync button. I then pushed a micro usb cable in through the hole in my fence into the back of housing and plugged in to doorbell. I then, connected the cable to a voltage charging module and adjusted to 5v and it works perfectly. I used silicone to seal the holes, but I used liquid insulation tape to seal the back of the camera where micro usb good in. The liquid insulation tape can peel off should I need to disconnect camera for warranty or any other reason. Thank you so much!
Hi. Actually the problem was the Battery. The battery didn't provide enough current after a year of use and had to program the controller to 100Amps current and worked fine. Installed a new battery (same specs battery) and turned the current up in the controller to 150A again and no issues.. bike still running strong with same controller.
@@seychelles44 Yeah is very small and fragile. I haven't found another way to do it. Some mentioned ribon cables but i haven't found any right angled micro usb ribon cables. It might work but the ribon cable might push the sync button when attaching it to the wall mount.
The cable arrived today. I checked on a micro usb connection, and I found a series of voltages. I take it I’m supposed to use the 5v supply terminal, Is that correct?
Yes, but you might have to use 2 boosters because it will draw more current from one booster probably causing the other device not to charge properly. You can try to split it with the booster to the doorbell and the other device without booster to see how it works.
guys pleas help, i have the same bike, i try to mess with the programing and now it wont top out at 53 mph and the speed doesnt match nether, i try to reserch and found nothing, pleas anyone that can go through there program and tell me what im supose to program it to pleas help me.