Hi Pix4d. I will write a separate email but pix4d fields is so fast and superior at creating orthomosaic images than any other software I use. I don’t need or use it for fields as I have a Mavic 3 Enterprise. 90% of the time I do not need a 3d model just a simple ortho output. I’m creating 4 test ortho’s using the same data, 2 are from pix4d fields using fast processing and then accuracy processing. 1 from metashape using the highest settings possible and then 1 from Reality capture. With pix4d fields I got a GSD of Fast processing - 1.3cm Accuracy processing -1.02cm Can you point me in the direction of documentation of what FAST and ACURRACYdo differently from each other? I guarantee if you created a software package purely for orthomosaic processing with no picture limit like others, priced around $20-30 dollars it would create so much extra revenue from those whole can’t afford pix4d fields. Im currently using a 14 day trial but will be sad as I really cannot afford the subscription prices due to cost of living and I have a young family but if the price ever comes down please let me know. Best wishes, Lee
Hello, thank you for your feedback! You can learn more about PIX4Dfields' processing options on our article support.pix4d.com/hc/en-us/articles/360028421272. Please contact our sales team in order to assist you with your request here www.pix4d.com/contact/.
Hello, in order to avoid flying over areas with 0 rate you would need to adjust the boundaries of the operation manually when creating the prescription map in PIX4Dfields. In case you have more questions please contact our support team www.pix4d.com/support/.
Hello, yes you can use this drone with PIX4Dfields. About solar field analysis, you could fly with high overlap (85% side and front) and process the images with PIX4Dfields' accurate processing.
Hi! The pix4d app doesnt support any of my drones (Dji mini pro 3 and Dji mavic pro platinum) Can you recomend me a software to make the mapping mission to then upload it to pix4d and generate the map? thanks Juan and greetings from Cordoba, Argentina.
Hello, thank you for your interest. DJI Mini 3 pro is supported, please see our support article here support.pix4d.com/hc/en-us/articles/8946053605149.
Hello, DJI Mini 3 Pro is supported by PIX4Dfields. You can see the weed mapping workflow for spot spraying in detail here support.pix4d.com/hc/en-us/articles/17246143431325.
Hello, you can also use RGB only as mentioned in the video, without multispectral. DJI Mavic Pro is supported by PIX4Dfields. You can see all supported drones here www.pix4d.com/supported-drones. You might also find this article helpful: support.pix4d.com/hc/en-us/articles/17246143431325.
Hola, gracias por su interés. Hemos publicado subtítulos en español para este vídeo. Puede verlos haciendo clic en los ajustes del vídeo, luego en subtítulos y, a continuación, seleccionando ''Español''.
Hi I am having problems with my 3M..I dont have a option for mapping! I only have waypoint Route, Area Route, Linear Route, Slope Route and Geometric Route... Can someone please help me with this problem
Hello, the level of detail possible is determined by the GPS accuracy at the time of image capturing. In case the drone is not RTK, it is possible to add a buffer to the prescription map created in PIX4Dfields.
Hey can you make an example how to export and IMPOT spot spraying on XAG P100 pro. And what do to on XAG One app. I'm intereating to buy your software, it looks amazing!
Hello, thank you for your interest! You can find answers to your questions on this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MxYgogezKbY.htmlsi=BX-IfiRz26ixy8d3 as well as on our support article: support.pix4d.com/hc/en-us/articles/12451352818973. In case of any other problem you could contact our support team: www.pix4d.com/contact-support/.
Very nice video and helpful. I will buy Pix4D Agriculture in near future. Can you name the company for plant counting. I couldn't hear. Or maybe Pix4D have plant counting now ?
Hello, thank you for your feedback! Plant counting was added to the latest PIX4Dfields release. You can see the latest update and download it here www.pix4d.com/blog/pix4dfields-manual-plant-counting/.
Hello, thank you for your interest! You can find our training course here: training.pix4d.com/bundles/pix4dfields-essentials-online-course-and-certification-exam
Hello, the flight height depends on the camera and type of crop. For example, when using a DJI Mavic 3M, a flight height at 25m with 1cm GSD would be good. You can read more about PIX4Dfields' manual plant counting here support.pix4d.com/hc/en-us/articles/3600428292028.
Using a calibration panel that was designed for a camera with different wavelengths is definitely going to affect the precision of reflectance values. DJI Mavic3M wavelengths: Green: 560 ± 16 nm; Red: 650 ± 16 nm; Red Edge: 730 ± 16 nm; Near infrared: 860 ± 26 nm; Micasense Altum, RedEdge 3 and RedEdge-MX (which I am assuming this older bigger panel is from): Green: 560± 20 nm; Red: 668 ± 10 nm; Red Edge: 717±10 nm; NIR: 840±40 nm; That should be pointed out!
It has nothing to do with the camera that Micansense was using it for. It's about the reflectances of the panel it self. You can use it for the M3M as it covers the wavelengths of that camera as well
Hello, PIX4Dfields is compatible with various brands that you can find here: support.pix4d.com/hc/en-us/articles/360038644731-How-to-export-a-variable-rate-map-to-a-tractor-sprayer-terminal-PIX4Dfields.
Hello, thank you for your interest. You can find more info about PIX4Dfields training here training.pix4d.com/bundles/pix4dfields-essentials-online-course-and-certification-exam
Question 🙋♂️ So after mapping the area, you get your normal A B lines. Is there a way to have it follow your spray path Basically I’m going to be spraying ditches the ditches are in a form of a long snake. So I’m trying to find out if I can follow just the ditches or will it only fly the A B lines?
Hello, you could manually draw spray zones, no-sprayzones and obstacles, use the magic tool to automatically detect the ditches area and the area out of them so to create a spot spraying map only for the ditches area or mark the area outside of the ditches as obstacle. You could check our step-by-step quide on how to create a spot spraying map here: support.pix4d.com/hc/en-us/articles/11186798543261-How-to-create-a-targeted-spraying-map-PIX4Dfields
Hello, you can find this info on our article: support.pix4d.com/hc/en-us/articles/5648296477981-How-to-capture-drone-images-for-optimal-results-in-PIX4Dfields
Hi Julius, I have an issue with sending a targeted operation to my XAG drone. I generate the map as your video show but when I send it to my drone there are some sections not there. Have you seen this in the past?
Hello maybe you find this aricle helpful support.pix4d.com/hc/en-us/articles/12451352818973-Targeted-spraying-maps-for-XAG-P100's-drones-with-PIX4Dfields.
What about other brands of sprayers? I couldn't find any information or tutorials about how to set up the created VRA or Spot Spraying maps into the sprayer's monitors.
With the new release we have export formats compatible with most tractor terminals like shapefile, ISOXML and geotiff. The exact instructions on how to import a map are different for the many manufacturers. It's best to check with your terminal manufacturer how the procedure is. But we will document it as soon as we learn about it, in a dedicated article throughout the next season. In general you find all the export option in the Export Menu under Operations. 6:03
Hello, the panel type that you can use depends on the camera model you have. PIX4Dfields currently supports the following reflectance panels: Parrot, Airinov Aircalib, Sentera and Micasense. PIX4Dfields detects reflectance panel images and warns the user that calibration images were found and that they will be used to process the dataset. You can check our support page for more info: support.pix4d.com/hc/en-us/articles/360022919691-Radiometric-correction-PIX4Dfields#label7.
Hi Guy's, I have just purchased pix4d fields and a DJI mavic 3m and cannot seem to export the field to my XAG V40. I tried to get FMS but only comes up with log in not create an account. Not sure on what to do, Can you help.
Hello, you would need to create an account using the XAG ONE app first. In case of any further issues you can contact our team here www.pix4d.com/support/.
Hello, you could try MicaSense's calibration panel. Here you can also find all panels supported by PIX4Dfields: support.pix4d.com/hc/en-us/articles/360022919691-Radiometric-correction-PIX4Dfields#label7.
Thank you very much for the thorough view of the integration between Pix4D and M3M. This combination is quite good for customers which would like to do “the things” in house and w/o having deep knowledge of NDVI, CWSI and other indices. Really helpful!!!
Hello, this field's size is around 12 hectares and the processing took just 2 minutes. The processing speed depends on the hardware of your computer, the field's size and whether you opt for fast or accurate processing.
Hi! Can i define unit/ha to kg/ha and more? Possible to owervrite the attributum table? Because we would like seeding and fertilizing makro and mikro at the same time with one maschine- but the map will define seed/ha only but i will the fertilizing differential
Could you use magic tool to detect weeds in a field mostly covered by grass? My client's field has 6000 hectares and he only needs to know the amount of weeds. Can I get good results if my data is RGB orthomosaic?. TIA!
Hi Julius, great video! Am I able to leave to application rates & information for the spray drone "blank" and simply let the spray drone operator input this data during their preplanning prior to flight?