Is the 9k a palladium gold alloy. Can you share any more info? I'm not sure how the 18k can be whiter if it has less palladium then the 9k. Is the 9k more nickle maybe and the 18k actually used more palladium in the alloy.
Hi @thewalkingrob8840. With 9ct white gold there is no nickel because our U.K. metal regulations do not allow this. This is due to its toxicity causing so many people allergic reactions to it. The lower value of 9ct white (compared to 18ct white) also means that it is not feasible to add lots of Palladium. If we did this it would make it too close in price to 18ct white Gold. Bearing this in mind Silver is used to whiten 9ct white Gold. Any other questions just let me know & thanks for watching our video.
Palladium has risen steeply in value over the past few years. Although in the pure metal forms Palladium is worth more than Platinum in jewellery terms it is not. This is because of the weight difference. If you made the identical ring in both Platinum & Palladium the Platinum version would weigh more & would cost more. This cancels out the per gram price difference between the pure metals.
Although we have never encountered this problem with our jewellery I have definitely heard it from customers that have bought jewellery elsewhere. 9ct gold doesn’t usually tarnish when worn unless it comes into contact with certain chemicals (like Chlorine) & acidic skin types. If a piece of 9ct jewellery is left in a drawer for a long time then it can tarnish. Both tarnishing & skin reactions are far less common with higher carats of gold like 18ct & 22ct. With 9ct it is more common (although still quite rare). This is due to the higher percentage of non-precious metals like Copper as you mentioned.
Hi, Unfortunately no jewellery plating lasts very long at all (despite what many jewellers say!). The only reason to plate Silver is to temporarily prevent it from tarnishing. Unfortunately no plating technique will protect it from scratching because Silver is a very soft metal. If you like Silver coloured metals some more hard wearing alternatives are; White Gold, Palladium, Platinum & Titanium.
Hi @@Mysteryp7, If you are on a tight budget & it’s a special piece to you it’s best not to spend small amounts regularly trying to repair/maintain it. This will cost you much more money in the long term. Instead, wait for a few months or years & get a replica made in a stronger white metal. This will last longer & will save you money in the long term.
There is a higher percentage of gold in 9ct than there is land on planet Earth so we don’t consider where you live a country 😂🤣😂 Seriously though, the choice of gold carat is very personal. Although 9ct had a lower percentage of gold (37.5%) than other carats it is actually more durable. On the subject of purity. 14ct is 58.5% pure gold, 18ct is 75% gold, 22ct is 91.6% & pure gold is 24ct.
Honestly only the first ones showed i could see the difference but not to much of a difference, but when moved a different angle i couldn't. can you replenish or restore 9ct 37.5 gold if it changes colour later?
Yes, the difference in colour between 9ct & 18ct can be subtle in some colours of gold (especially yellow). The difference is more noticeable between 9ct & 18ct rose or white gold. Yellow gold rarely changes colour when it is worn regularly. If left in a drawer for a few years though, it can tarnish & darken. A quick polish from a goldmsith should bring it up like new though. What you will see in all precious metals though is a surface finish change. This is when a polished, shiny ring starts to dull. Or the opposite when a satin (matt) ring starts to brighten up. Many people mistake this for a colour change but it is not. This surface finish change is also easily remedied by a polish from a goldmsith.
Nice technique sir. Sir can it be done on 9.25 starling silver with solitaire AD stones or any other imitation ring? Or this flame process will ruin the total ring if it's not pure silver?
No, it is not advisable to stretch a stone set silver ring. The correct way to resize a ring like that would be to cut the back & add or remove silver. The stones should also be shielded from the heat.
@@RINGjewellers thank you for your reply. But can this 9.25 silver or any imitation ring be joined by using flame after cutting it from the back, to give a look of a perfect ring!?
Yes@@bb8218. Any skilled goldsmith should be able to resize a ring with an invisible join on any precious metal although there is sometimes a slightly visible join on a Platinum resize. Goldsmiths can use either traditional soldering techniques or a laser welder. Unfortunately at RING jewellers our workshops are so busy creating bespoke pieces that we no longer take on repairs or sizings.
Hi Jamie, The prices vary depending on the design you would like & how much of the metal & gemstones you are supplying. If you don’t mind sending us photos of your existing jewellery along with a description of what you would like the new piece to look like we will gladly send you a quote. You can use an enquiry form form our site like the one on the bottom of this page: www.ringjewellery.co.uk/services/remodelling-and-other-services/jewellery-remodelling/
Hi Maryann, Thanks for watching our video! Many people do prefer the paler colour of the lower carats. It is such a personal thing (I think you meant 9ct by the way, not 8ct).
Probably because the large chains often make their jewellery a little on the lightweight side to make it look like a bargain! At RING jewellers we never sell hollow jewellery & always make our pieces to a good weight to ensure longevity.
@@RINGjewellersSo you don't know then? My own thoughts is because if the customer is clued up on gram weight & possible future resale value, will quickly realise they are not getting a bargain.
As I explained high street chains would not want to advertise the fact that their jewellery is often lightweight compared to heavier handmade, higher quality items. Having said this there is a lot more to jewellery than just the weight. The labour (be it casting or hand made), gemstone qualities (if applicable) & cost of overheads all play an integral part in the retail price of an item of jewellery. Lastly, it should be pointed out that the large financial loss customers often experience when selling jewellery is at the other end of the chain. The way 2nd hand jewellers buy jewellery is extremely harsh. They usually pay less than the scrap value! When we make a ring even a piece of gold wire costs more than scrap value before there are any manufacturing costs at all added. 2nd hand jewellers often buy at below scrap, tell the customer they will melt the piece, but then give it a quick polish & sell it at a HUGE mark-up.
@@RINGjewellers If you ask a high street jewellery store whats the weight of this ring or chain they don't have scales. Now for example go in with some second hand gold, magically out come the scales to give you a price on the gram weight.....funny that!. I never listen or trust the people working in a store, best to do your own homework & be clued up.
The differences are subtle due to the high quality alloys we use in our metals. You should be able to notice the creamy colour of the 9ct white gold though.
Yes there is. The higher the carat, the higher the purity of gold from 37.5% in 9ct up to 75% in 18ct in the carats you mentioned. Visually, the lower the carat the more coppery the colour looks. 24ct gold is pure gold which looks a bright, almost orangey yellow.
Hi, unfortunately we are so busy in our workshops making bespoke jewellery that we no longer have the time to take on repairs & sizings on jewellery that we have not made. You should expect to pay between £25-£50 though depending on the precious metal your ring is made from.
I didn't realise before the colour difference, just saved me a fortune for my wedding ring since I prefer the more copper colour as I also have brushed brass bracelet. 9krt for the win for the pale boy
It’s a very personal choice. Diamonds are the most popular of the 2 stones because of their neutral colour but Sapphires are our most popular coloured stone. When it come to the gold 9ct is slightly more coppery coloured than the rich, yellow of 18ct. Again it’s a very personal choice but we can set either stone in 9ct or 18ct.
Hi Zaki, It depends if the ring is well made & not too thin in depth. A lightweight, flimsy ring will break easily regardless of the metal it is made from. A well made 18ct gold ring should be fine for everyday wear. This video explain la the difference between a well made heavier ring vs a thin one: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hB-TnXAb31I.html
No problem@@zakialle9767 if you email the shop: ringdesign@hotmail.co.uk we will let you know more. If you know the finger sizes you need please include that information too. Kind Regards, Stuart.
When people are allergic to gold or white gold or is usually a reaction to one of the non-precious alloys rather than the gold itself. If the jewellery was made overseas there is a chance the white gold could contain nickel which is often a problem (although we have banned it in the U.K.). Another thing to consider, if the item is a ring, is can anything be getting trapped between the ring & your skin (ie cleaning products, soap etc)? This often happens with hollow jewellery & is mistaken for an allergy.
Hi Angel, I have a conversion stick at the shop. Unfortunately I’m out of the shop at the moment due to lockdown but when I’m back I’ll take a look & let you know.
Congratulations on your treasure haul Christopher. Unfortunately I have to buy my metals from suppliers that can tell me about precise purities, alloys & sometimes place of origin so I would not be interested thanks.
Would you like to design your own wedding ring? www.etsy.com/listing/855607275/sterling-silver-wedding-band-adjustable?ref=shop_home_active_4&frs=1&sca=1
Hi Rajaa, It depends how well made the ring is. With a decent wall thickness (depth) there’s no reason why a 9ct gold ring shouldn’t last a lifetime with normal wear & tear. If, on the other hand, a ring has been made with a thin wall to cut down on gold weight it would probably only last a few months.
Hi Danielle, At RING jewellers we can make any Titanium ring in any size. If you would like to email us the design you would like we will get back to you with a quote: ringdesign@hotmail.co.uk
Hi Adam, yes it’s a real shame that most jewellers don’t point out that their white gold is plated. Our ‘natural’ unplated 18ct white gold is an off-white warm grey that doesn’t need plating due to the alloys we use.
Hi scala1944 most of our customers are keen to know how a wedding ring will look when they wear it. That’s why we produced this video. If you want to find out more about alloys one of our British assay offices will be well worth getting in touch with. Here’s a link to Birmingham: safeguardvaluations.com/download-centre/meet-the-experts
Like many things it’s a matter of taste. The customer hated the ring though & it was also very sharp so it needed work doing. The new ring is cherished & worn everyday!
Hi Jozengaming, We do not buy second hand jewellery I’m afraid. Second hand jewellers are quite harsh & usually only pay the scrap gold value even if the piece is in good condition. The price will depend on the weight of the ring but at today’s gold prices you should get between £11 & £13 per gram for the ring. Do bear in mind gold prices fluctuate all the time so this will vary depending when you sell it. I hope this helps.
@@RINGjewellers It's and I wasn't, going to sell it to your company just wanted to know the price of my jewelry since I'm new to this stuff and thank you.-
A very nice, quick look at the basics, but I noticed that the court shape or style ("Comfort Fit" for us Yanks 🇺🇸) wasn't mentioned. The "D" shape is obviously not going to be offered in Court, as the whole idea of the "D" is the domed outer surface with the flat interior, but the others certainly could be, as well as pure "Court" which is domed or convex on both surfaces. ('Zat right? 🤔) And I love the way your "Ring Bar" is constructed! Ladies and Gents can stand on either side, facing each other, trying on and comparing bands without having to wait, while a salesperson hands them over from stock trays, one at a time, retrieving and briefly polishing each one, and putting them all back in the right spots, while keeping an eye on them so they don't "accidentally walk away on a forgotten finger" and answering questions, looking up prices, styles, widths, and sizes. All at the same time!! That's the usual procedure most of the places I've been here! 😒 And it seems that each one easily retreats back into its individual space, while remaining available for anyone standing nearby, and the little cord loop, (I'm assuming attached to some sort of spring-loaded retention reel) isn't thick enough to interfere with the size when being tried on! But, I'm sure its quite unbreakable, and not easily cut by a hidden blade! That's awesome! Did you design that? I've not seen anything like that here. I noticed too that there were other sections you didn't address - are the Court style rings on one of those? What other styles do you have there? As you can probably tell, I'm a true wedding band "Aficionado" of sorts, but I bet the way I sign off most of my messages will clue you in to why that is!😉 Now, off to check out your website! Good luck on your business! Best Regards, Jeweler's Granddaughter
Thanks for taking the time to watch our video. We actually offer all our profiles in a court/comfort version too. We use the terms flat-court, mid-court & D-court. Each ring is made individually for our customers so there can also be other subtle variations like a shallow D- shape or a profile in between the flat & mid profiles.
Hi Nathan Serna, Although we can source 14ct gold it is not standard in the UK (we use 9ct & 18ct). It is very popular in many other countries, although imported 14ct white gold can be a very yellowy colour & is usually plated to hide this.
Hi Sabrina DeeBunny. Thanks for the feedback. Some people do have more of a ‘retro’ taste in jewellery. In these instances we can take a contemporary piece & reset it into a more traditional design. Anything is possible!!!
@@RINGjewellers I have a question..I habe a ring stamped PD..it doesn't tarnish how can I get it tested if its Palladium..I took it to a jeweler here in the states and they didnt know it..seriouse
Hi * ilonca * , A jewellery store with a workshop should have ‘testing acids’. The colour change from the acids when dropped on the ring should determine the metal.