Salut, je me demandais dans la vue du spectrogramme il y a moyen d'avoir les informations quand tu glisses le curseur mais juste de la valeur la plus haute, le peak label, mais qui reste affichée comme sur Flux Analyzer ? Edit: Ah c'est bon je l'ai la valeur true peak en direct peut être affichée au dessus de l'oscilloscope. Cela dit ça peut être une bonne idée d'avoir un peak label et en plus si tu peux rajouter la fréquence et la note de ce peak ça serait magique.
looks exciting! when are you planning to release it? :) I was considering switching to a different plugin just for those features, but I love your PsyScope, so if it might come soon, I'll wait! :)
hard to say, that is very earky stages here, lot of optimisation to do/test, and im out of computer for 15 days, but id say within a month it should be out i think
Hi, could you look into a video posted recently on FFTs and how to get a clearer quality view of low frequencies. The videos called "My problem with (most) spectrograms" maybe it could be a development for psyscope.
Yeah i had seen it already, its interesting. for now its not currently possible.since the FFT alg i used in psyscope was highly optimized for a multitrack context, in fact it does not compute phase part atm, (that would basically double ram/cpu proc, which quicky add up) so im not sure but that might be considered later on
Tbh i have hard time wrapping my head on how that would translate^^, do you have any vst oscilloscope exemple that does that maybe i could study? but i will investigate yes
@@jona8659 yeah so if understand correctly when on beat that would be same as now, but when going on bar, would loop each ie 5 beats if 5/4 ? so would that just change bar, 2, 4 bars timming settings, or what im not sure is what happen if set to 1/16, 1/8, beat, 2 beats, those would remain same right?
Hello j'ai du mal à l'utiliser depuis la maj ableton 12. Quand je fais le audio To j'ai uniquement track in et plus les sidechain. J'ai essayé avec la technique du buss et des send
hello Tu parles de psyscope free ou pro? psyscope pro n'as pas de sidechain, c'est sans routing, if faut juste placer une instance la ou on veut monitor le signal
@@23fx23 free je pense, je regarde demain. Avec la pro si je comprends on place une instance sur piste bass, une sur kick par ex et Master. Je regarde celle de master tout simplement ? C'est pas trop gourmand en ressources ?
@@thibaud57 oui c'est ça en fait sur la pro, tu ouvre n'importe qu'elle instance, elle a acces a toutes les autres. non c'est pas plus gourmand parce qu'en interne, il y a q'une seule véritable "instance' du 'moteur' de créée, seulement plusieurs instance de l'interface, mais elle sont détruites quand le plugin est fermé, donc en gros il en q q'une (celle ouverte)
@@23fx23 ah c'est intéressant. Je pense avoir la free, puisque j'utilisais le sidechain jusqu'à présent, mais avec ce que tu me dis ça me ferais gagner du temps donc à voir... Cependant j'avais peut quant à la latence, vu que j'en ai beaucoup de manière générale et j'ai toujours du mal à placer les éléments correctement sur la grille. Si jamais tu as une astuce pour palier ça je suis preneur également
Thanks! Just writing these instructions down for those who might find reading them faster: Technique 1: Instead of using PsyScope as an insert on any given track, insert a Return track and add the PsyScope to the Return track. Adjust the Send dial on your track (not the Return track, but the initial track referred to) and increase the dial to the max value. Repeat this for as many tracks as required, creating their own individual Return track and sending the original track to their individual Return track which has their own PsyScope instance. Once finished doing this for all tracks required, open a PsyScope instance and select the 'stack' view. When in this view, click in the 'lat 0' box a few boxes over from the stack view and enter the latency value you would like to compensate for. Doing this while in the stack view will do the latency adjustment globally across all your tracks. Technique 2: As an alternative, you can go onto your Master output bus and create an Effect Rack. Create an empty chain and add a Compresor on the chain and ensure that the ratio is set to 1.00:1 as we don't want to apply any compression at all. Enable the Sidechain on the Compressor and enable the Monitor button besides the Sidechain button. Under the "Audio From" in your Compressor, select which track you would like to have your PsyScope instance for and also ensure that 'Post Mixer' is selected underneath the track you selected. Make sure that the "EQ" button beside Sidechain is disabled/off. Next add an instance of PsyScope after your Compressor (but still within your Effect Rack's chain). Duplicate this chain in your Effect Rack for as many individual tracks that you would like instances of PsyScope for, making sure to change the "Audio From" that is selected on each chain's Compressor to be for the tracks you would like the PsyScope instance on. Once finished doing this for all tracks required, open a PsyScope instance and select the 'stack' view. When in this view, click in the 'lat 0' box a few boxes over from the stack view and enter the latency value you would like to compensate for. Doing this while in the stack view will do the latency adjustment globally across all your tracks. Note: using technique 2 means that PsyScope won't automatically have separate track names and colours for your individual tracks, so you need to untick "use DAW colors" in the Skin menu and manually specify your track colours. Then press the "About" tab and untick "use daw txt". Then you can press Ctrl + double click each individual track name inside PsyScope and rename them as required. *THIS FINAL INDIVIDUAL STEP NOT MENTIONED IN THE VIDEO BUT IS IMPORTANT* In your Effect Rack, disable the Speaker icon beside the volume and pan settings for each of your chains. Then, create a new chain and leave the Speaker icon enabled for this new chain. Doing this allows the PsyScope instances to still work for their individual tracks, but you're not then monitoring each track a second time which doubles their overall volume output. The final chain allows the signal that the Effect Rack is receiving to play back out at the same volume, as otherwise you would be hearing nothing after having bypassed the Speaker toggle for your individual chains with the PsyScope instances.
Yo, en gros il y a des fichiers de loops, découpées en 'slices' puis wai soit il ya moy de randomizer les slices/fichiers en automatique, soit jouer un truc un peu plus 'ordoné' en sequence definies (les sliders en haut a droite dans le mode "seq") ou sinon enregistrer 'live a la main' les mouvements de la souris qui définissent quel slices/fichiers jouent. mais oui en gros dans l'idée c randomizer/faire des variations de boucles
a bit hard to say. still lot of stuff to finish/clean-out/optimize ect, and i have to get back to my 'real' work for a while now sadly.. :/ but *hope maybe next month there could be a demo of the app
@@ChillMaxxGroup for once i will not sh|t on ableton :p, they did quite a good job on that protocol, lets give them credits for that.. now i bet that will all probably be messed up as soon as their ;,;:;;sH1ty PDC will kick in lol .. but's thats another story ^^
