Great tutorial! In depth with everything and shows exactly where things go. Love the modification as well. Does anyone know if this would also work with a 2018 impreza sedan? not sure if it'd be different but just want to be sure. I don't have the hatchback but would love to get this hitch!
Just did everything you did, controller is not lighting up when turning on the truck? I have trailer brake module fault showing but the controller did not light up? can you help me?
Thanks for sharing this video. I am going to try soon. Last weekend I put a D17A in my Civic. My first engine swap was a success. How long did your EJ20 last for?
I just discovered a similar situation with my engine, FA20, both rear exhaust manifold studs are slightly tilting to the back of the car. The Exhaust manifold gets hung up and cannot be removed easily. Im sure there is a way but I have to find it. Until then I cannot replace the gasket between the exhaust manifold and the turbo inlet which is leaking. On top of the that I also discovered the dealership forgot to put back several things like rubber gaskets, bolts and one of the nuts on the exhaust manifold mount that has been casing a major leak.
Thanks for the great job application and I suggest the camera angles to show how hard to work in such environment Thanks once again for all the beautiful work 🇩🇰👌👍🙏
Id have cut back side one third. Got in front. Cut down a third from top and cut the front in about 10 inches plunged in at a third way down and cut to the bottom. Came back up and cut down through the holding wood
i cant figure out how you get to the mounting bolts with the way the trail arm is in the way and no matter how i try going thru the little area of the trail arm the extension & or socket is on a lean . the engineer needs a swift kick in the azz
Cool and helpful video! My 2003 looks just like yours and my friend yluded 5m bolts to try and get the plate off, but all 3 broke in the clutch plate. I have no idea hoe im going to get mine off.
Hi thanks for sharing this video instruction, I bought already swapped car (also legacy) but now I have over fuel consumption Need I change engine computer?
Chris, great video! I have been working on this over the past couple of days. I went through it in the reverse order from you. I installed the controller, went into Forscan and enabled the TBC. The controller lights up, allows me to control the Gain, shows "Trailer Disconnected" on the dash, but it showing "Trailer Brake Module Fault". I'm thinking it's because I haven't replaced the master cylinder and it looks like I have to do that as I only have one plug underneath, towards the front, which I believe it for the cruise control. I'm trying to hunt down the proper master cylinder. When I searched the part number you provided in one of your responses, it has the two plugs underneath but mine also has a plug on the side, near the valves. Any idea on how to hunt that down? When I called my local dealership, they only provided me with the master cylinder that came with my truck, which only has the one plug.
