So if you have sections 5 and 4 out can you put out section 3 if you need more stick or will I have to suck the boom back in all the way the put out sections 5 ,4,3
I don’t know your exact situation, but I do know that crane scopes out by a boom pinning system. Your telescopic cylinder can only extract and retrieve boom sections it can only reach. I think you inner telescopic cylinder is only 37ft long. So if your trying to retract section 5 , your last section, you can’t without scoping in all your other sections before it. Then your able to reach it with the telescopic cylinder, adjust it whether it’s bringing it in or scoping it out. If you give the computer a command being out of sequence. It won’t respond. Hope that helps
A tadano doesn't work the same as a liebher or grove, all boomsections go out simultaneously and you don't pin sections, it's lots simpler and lots faster!
Did you figure it out already? What size tadano are you on? There should be a button on the aux lever one you max out all sections hit that button and it should send the last section out
I Think the 9130 is has one LMI. The “PAT” like the 90t. I just turn the over ride key on and shut the alarm off when I’m driving it around. You can set lmi for tire mode, but you’ll still have to use the over ride key.
I'm in a rt Grove 9130e I was wondering how you get it travel ready I have it on rubber but the boom only lets me boom down to 13 degree then it locks me out the company I work for wants a 0 degree angle so what's the deal
I'm in a rt Grove 9130e I was wondering how you get it travel ready I have it on rubber but the boom only lets me boom down to 13 degree then it locks me out the company I work for wants a 0 degree angle so what's the deal