Warning--any person and/or institution and/or Agent and/or Agency of any governmental, public or private structure including but not limited to the United States Federal Government also using or monitoring/using this website or any of its associated websites, you do NOT have my permission to utilize ANY of my profile information nor ANY of the content contained herein including, but not limited to my photos, and/or the comments made about my photo's or any other "picture" art posted on my profile. You are hereby notified that you are strictly prohibited from disclosing, copying, distributing, disseminating, or taking ANY other action against me with regard to this profile and the contents herein. The foregoing prohibitions also apply to your employee(s), agent(s), student(s) or any personnel under your direction or control. The contents of this profile are private and legally privileged and confidential information, and the violation of my personal privacy is punishable by law.
This video showed my problem. The plumb bob I bought is defective in that it only has a hole on the top! There is no other hole on the side! I'll try to return it in exchange for another one, and I'll be sure to check it for a side hole too! Thanks!!!
Clear, Concise and Straight Forward👍. I watched something (same topic) yesterday that had loops, knots twists and turns along the ledge of the plumb bob😂... w/o having ever threaded a plumb bob before even I noo he was 🕸whey off, fkn idiots half the dam ⚖️±ime. The "Google It" Civilization (🧵of r¡ +@rds) 🐦🐦⬛Chrowm ○ Zone Sqoqq Toqq 📻Ha🪬's🐷 M¡ll🌊 -¹♟️IKU²
Looks like an extended slide release. My only Glock is a G20 sf gen 3, Factory slide release. I can beat on it and it won't drop until I hit the release. That's what I consider reliability.
Thank you for this video. I was in a debate in another comment section and ive never seen this since i dont like modern firearms. My pistols have done this occasionally so i thought it was something else. Turns out its both
Thank you very much for the helpful information. This approach by Samsung developers is really frustrating. It doesn't make any sense to do it this way. When you paste, the system brings you to the editor function anyway. Starting from the editor makes a lot more sense.
Find out How to add a picture on top of another picture without it being outlined automatically by the Sticker Software in Samsung OneUI 6.1 with a Samsung S24 Ultra! IT DOES STILL EXIST and HAS NOT BEEN ELIMINATED as a photo editing option! It is even easier now actually!
You don't need to use Benzene/Carcinogen laced Brake Cleaner with a non toxic CLP- Froglube makes their own non-toxic degreaser now. Just fill a tuperware container with their degreaser and soak the slide, spring, and barrel for 10 to 15 mins before brush scrubbing them in the solution and its super clean. The frame and frame components can be wiped clean by hand with a micro fiber rag moistened with degreaser. Then you apply FrogLube and you've got a truly non toxic CLP and degreaser combo instead of adding a known carcinogen(Benzene) on your gun from the brake cleaner and defeating the purpose of the Froglube's bio-safe formula.
So, mine only does it with one specific magazine. I have 2 brand new mags and a bunch of older ones. One of the new ones sends the slide into battery...none of the others do this. I also don't have to slam it I can insert it in a normal manor, and it instantly and consistently sends the slide forward. I like it I compete and would like them all to do it. on visual inspection it appears identical to the other mags.... I'm going to take a caliper to it and measure some dimensions. any ideas? I also believe it only does so when it has a round in it IDK?
Its just a "overhand knot" (or "stopper knot") Make a loop at the end of the string and pull the tag end through. That's it. If you need the knot bigger, do it again over the knot that you just made. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SwdJ5op25SM.htmlsi=mfdm0D-SGD2xmA-1
Thank you, video was useful. This was how I assumed it worked but wanted to be sure. Gave u the thumbs up. Only thing I'd prefer different is maybe don't be so down on people who don't know how to do this kinda stuff or today's newest generation. If people are watching your video it's to learn not to be talked down too. Thanks again for the video, keep it up.
Attitude Wasn't primarily focused on those that don't know....I was more angered at the "how to videos" I found out there showing people how to do it wrong.... that's what irritated me enough to make a video... because I didn't want guys who don't know how to be doing it wrong and defeating the whole point of the use of the tool in the first place.
@@MyBigThing2010I’m glad I’m not the only one who feels that way. Like, it’s fine if you don’t know how. You have to either understand the tool, or learn it somewhere. The problem is when people make videos to teach people how to do something wrong when they don’t understand what they are teaching people. It drives me absolutely insane. I’m a machinist, and I was taught very early on that if you don’t know what you’re talking about, don’t fucking talk.
My brand new Taurus G3 9mm does this right outta the box. I purposely slammed the mag in to see if it would do it and it did. I have seen videos of people always loading their pistols like this so i wanted to try it.
Ever since I installed the Vickers slide release it started doing this on my glock 19 gen 3. I feel like it is a defect because you should have full control over your firearm but I'm going back to stock see if that fixes it
But you are smart enough to go looking for information you need and driven enough to make sure you do shit the right way! ...🤣 that's why I made the video..... and I'm sick of running into stuff that's not Plumb, probably because the guy tied his Bob wrong 🤣 . I'm glad it helped you out and you have a proper tie on your Bob now!
It's a physics issue and coupled with wear or surface finish one may be easier to do than the other....tis the nature of the beast with firearms of this design.
I feel like this is a feature, basically a better version of slide lock which not only auto-locks but also auto-loads... Not hard to hit the slide stop yourself, but it's really nice to have it be auto
I wouldn't call it a "feature" ....cuz it's not reliable nor intended by the manufacturer. More of a "benefit" IF it happens to happen....especially if in a high stress situation....where it is most likely to occur as your handling should, during an event, be extremely firm and movements "well intentioned." But you should be ready to manually drop the slide AT ALL TIMES, especially during an engagement! I just wanted to make everyone aware that it is not a defect and that it's something that can and does happen....and not to freak out and start hunting down warranty service or gun Smith to fix something that isn't broken....wasting everyone's time and potentially going unarmed for a period of time if it's their only firearm and it's out for service for nothing. Thanks for watching.
Your video says 1/2 tsp baking soda, your vocal says 1/2 tsp baking powder. I’m thinking it should be baking powder. The can opener you had in your hand was a P-38. Courtesy of Half Vast Flying
Thanks this video was done on very little sleep, very early in the morning. Yes. Baking powder! ....it's the leavening agent to puff it up a little without yeast nonsense. Same concept as pancake mix.
Only 1600 rounds through my Gen 5 19 and I’ve already worn out the slide stop. Thanks for posting. I’ll be giving the oem extended slide stop a try soon. For now the worn part doesn’t malfunction just doesn’t lock the slide on the last round every like 3rd magazine and sometimes the slide slams home if I insert a full magazine hard enough. Since it is my carry gun I will replace the part so I know when I am on my last round if need be. Doesn’t bother me at the range though it is annoying to be honest. Might even install the Glock oem extended mag release as well and have 2 under the radar oem upgrades, while fixing the slide lock issue I have for the time being until I wear out the new one lol. Thanks for the video!
@@shawnsikes4596 it's normal. Nothing to be concerned about if you handle your firearm appropriately. Just don't count on it happening. Also try losing your mags down one or two and it could completely go away.
They sell felt pelletts with gun cleaner on them Put one in the chamber and shoot it out. I usually shoot two of them one after the other. Cleans the bore right out, and it's quick and easy. The usual cleanup is like any other gun after you do that.
Agreed except peanut butter will go rancid if not stored properly (canned) or not cycled in and out of your supply. So it's not necessarily a recommendation from me for preps even though I go through peanut butter like water here.
OK I may just be a dumb girl but what's wrong with using a regular gun cleaning kit? Sorry I get impatient and not watch the whole video when I saw several Q-tips
Yea your right....Maybe you should watch the video then... instead of being entitled to a personal reply from a free content creator. Gun cleaning kits don't often include 177 calibre utensils to use and quips for perfectly and everyone has them.
I noticed that if the magazine is not full it jams if I slam a mag too hard. But fully loaded gen 5 19 does this and I found it accidentally. Kinda fun but only works in my gun fully loaded mags.
It will only happen on fully loaded or overloaded mags. Malfunctions with a hard inserted half loaded mag is also fairly standard and should be expected. If your running partially loaded mags for training just be aware and don't send it home so hard. Again... it's physics.... your motion is exerting forces on the spring and cardriges causing them to shift around..... that's what causes the malfunction. With a fully loaded mag the spring and cartridges have no where to jostle so it's more of a uniform piece with all the moving parts locked tightly together.