Thanks for checking out DH^2 on RU-vid! We are a father and son team that is here to provide you with reviews, tutorials, and tips for household projects and electronic gadgets.
Our passion is to help you out with your technology purchase decisions by giving honest reviews, unboxing, and setup videos.
We are at an amazing time in history where there is so much technology to help us, but yet it can be confusing deciding what to buy and understanding how these gadgets work. We are here to help you out!
Ready to learn? Make sure you subscribe and leave a comment because content will be added frequently.
I just installed these, thanks for helping with the wire layout! You can use each switch for different areas in your place though. I have one for my patio and the other for the kitchen. For those asking questions, you have to have a neutral wire, no way around it. The main switch (it will have the neutral wire bundle) is where you put this switch. If you don't have the neutral wire bundle and just one neutral wire then that's the satellite switch and this will NOT work for it, you need a dumb switch. You may also have two main switches that are connected so you could use a two pack for one light.
The new app (when it actually acknowledges you have a system and connects to it) is horribly unintuitive. Completely nonsensical, and I question the qualifications of those in charge of usability.
Goddamn Samsung could have made this a lot easier ! They could have just let the screws be accessible. I’ve got a slightly different model and the top screw is exposed. But still need to remove the entire plastic panel. 🤬
Thanks for the video. I just wanted to let people know that this is the 2nd time I've had to repair my handle and we all should refrain from cooking on the front right burner of our stove if we have this Samsung over the stove microwave. Usually the steam or heat from below starts to cook the plastic piece on the handle which makes it brittle and or melt and eventually the handle breaks off. It's happened to me 2 times already.
Thank you this was very helpful! I will be painting my stained wood trim also. Do you think the liquid sand paper is needed if my wood trim is not varnished and has a rough texture already?
I am trying to use this for our office calendar. I am a bit nervous about adding unsafe downloads to the office computer and there are many options for downloading the adblink... do you have links to the programs/download you used?
Do not buy Samsung microwaves. They have a defect where the door handles break very easily. I owned 2 and they both broke. 1 of them broke after 1 month of use. they suck.
I've had bad luck with epoxy repairs so I skipped the gluing. Once I removed the broken piece (the little chimney that receives the screw, the bit that Dan needed the needle-nose to grab) I used a screw that was about 1/4 inch longer than the original and screwed it all the way through (into the part still in the handle, the plate that the chimney was once a part of). Snug as a bug in under 5 minutes. BUT I appreciated this video because it gave me the courage to start snapping off that inner cover! Sometimes you can't tell if something snaps into place or is screwed into place until you hear the CRACK! ;^)
It looks like the consensus is that the Bosch laser tape measure is the one to get. I've watched a few other RU-vid videos who have reviewed the same and basically it's a thumbs up. Thank you for your review! 👍🏽
My Christmas tree has almost 3000 mini led lights attached in 3 separate sections. The largest bottom branches did not light when I plugged all sections together. I called the manufacturer and they sent me only replacement lights. I was hoping they would replace the bottom section. I searched every branch until I found one light bulb damaged with the wires severed. I'm not interested in saving the light but want to know how I can join the severed wires together to make all the lights work. There are 3 wires at the break in the strand. I'm trying to avoid removing the lights and putting new ones on. I really don't want to just add new lights over the original lights. Can you help?
Thanks for the video. If the other dummy 3-way switch in the circuit is used to turn the controlled light on or off, does the HS210 status light and the app accurately show the on/off condition?
Yes. Just tested it. If you have a regular analog switch on one end and a Kasa smart switch on the other, you can control the light from both ends and Kasa will know when it's on or off.
@@billgriffin9946 You likely swapped one of the travelers with the line/load wire. Swap one and see if it fixes it. If not, then swap it back and try with the other traveler. One of them will fix it.
@@dh4880 Mouse toggle isn't showing as an option on my fire tv after enabling the developer settings - any other programs that would also work? Thank you :)
you didn't say anything about a resistor like others have talked about. Is the resistor closer to the plug so you didn't have to worry about it?? I need a 20 light strand with 6" spacing and NO ONE seems to sell them anymore. They keep trying to shove 4" spacing down my throat. You need what you NEED> so I thot hmmm maybe I can cut something in 1/2 or get a 20 from a 50 with the 6" spacing. Would it also be possible to put a new plug on the part you cut off so now you have 2 seperately working strands from 1 strand of 50 lights?
Brand new Dyson furnace doesn't blow hot enough air, the company's been here twice but still blowing luke warm air and runs forever to raise the temperature 1degree? Anyone have this same issue????