This is the official channel for KYB Americas Corporation.
KYB Americas Corp. was established in 1974 and is the headquarters for KYB’s North American aftermarket distribution of automotive shocks and struts for the United States and Canada.
Pro tip: Install the top bolt before you cut the banding that is hold the shock compressed. Once bolted cut the banding and the shock with slowly decompress. Guide the decompressing shock into the bottom hanger. This will be a lot easier than trying to line up the holes while trying to compress the shock at the same time.
I bought kyb front struts from local parts store. 10 months later both leaking oil. I went to parts store and they said after 30 days I have to contact manufacturer. I contacted kyb and they said they couldn't do anything..happy anniversary
Well, contacting the place of purchase is the correct first step. Authorized KYB retailers will have a program to deal with your issue, so maybe check back with them. Our warranty is listed on our website: www.kyb.com/wp-content/uploads/2024/02/KYB_Warranty_010124.pdf For future reference, be careful when installing suspension components with the wrong tools, there are many ways people unknowingly damage shocks and struts that lead to failures like leaks, so seek professional installation help if you're stuck. We also have a technical support team that's available during weekday hours.
Someone please help. I'm installing KYB 555601 Gas-a-Just Shocks on the rear of my 2004 Ford Crown Victoria. The shaft keeps spinning such that I have to use some other tool to hold it in place, like a wrench, I see there's a special tool for it, but I feel I've already gotten it too tight in trying to get it tight enough so the shaft will stop turning so I can put a torque wrench on there. I feel like I've surpassed the 30 ft/lb spec, but the shaft still spins, so I can't verify with a torque wrench.
We have a technical support team that loves to assist, but they don’t monitor RU-vid comment sections since they have their contact information listed on our website. Please reach out by emailing TechSupport@kyb.com. There is a special socket tool for installing certain shock designs, which it sounds like you need. Be careful when installing suspension components with the wrong tools, there are many ways people unknowingly damage the shocks that lead to failures, so seek professional help if you're stuck.
Hi, after reading a lot on the internet, i buy KYB shocks to replace on the front of my lexus is250. i was also planning to change the springs at the same time, and ordered these also from KYB but i see the KYB springs are a tiny little bit thinner then the OEM springs. should i replace with KYB? of should i better leave the OEMS in? the difference is 1 millimeter at most.
@@kybamericascorp why is n't it the same for every KYB ? The question is just: does it matter that the kyb springs are just a little thinner compared to the OEM springs? If i need kyb Europe, please tell me an email adress. I just don't know how to send another receiver my message by RU-vid Thanks a lot
@@henrivanmanen9157 Because we don't sell individual springs as a product line in our market like KYB Europe does. Therefore, we don't have the product knowledge to explain if there's a specific reason for a design change, or if there are any helpful tips we can pass on to assist you in the best way. Also, I'm only guessing that you need KYB Europe. I don't know your location, your vehicle, or any other pertinent information to point you in a perfect direction. You can copy and paste your previous message's text and send it to whomever you need to contact. Please find the KYB company that serves your area to best help you. KYB Europe's website will have links to assist you in that regard here: kyb-europe.com/contact/
A blind test isn't as important as showing the performance from worn suspension components, low cost/ low quality components, and a premium competitor vs. KYB aftermarket suspension components. We already had an independent third party doing the test and capturing the data. It didn’t need to be blind. This testing video is about showing the viewers the difference in choosing the right parts for their vehicle.
What is best choice for dirt roads, including mountain trails?... Now have larger-than-OEM tires. Went from 235/75R15 to 31x10.5R15. No towing. Tried Excel-G, but they wore out too quickly. Tried Monomax, but only felt good for 1 month. After that, compression phase too stiff and extension phase too weak.
Uh I was hoping for an explanation of how they perform. Like the actual physics versus various applications. Which apps this matches and does not match, plus point me to other products in case of app mismatch. Useless video.
Thanks much for the explanation. I mistakenly put on heavier rims and I feel it immediately, the oil kyb shocks I noticed can't handle the weight so now I know to buy the gas shocks
I put a set of the gas-a-just on my 01 Grand Cherokee w/4" lift and 31" tires. They are about 3 years old and ride exactly like they did the day i put them on (approx. 45k miles). They ride much MUCH firmer than stock. Especially in the rear. The Jeep is my work vehicle, i do remote welding on farm equipment and pull a trailer with my welder and tools so the stiff rear is great for me. I like the sportier ride, personally and they noticeably reduce body roll in corners. On little bumps/wash boards they are harsh at low speed. However, the faster you go, the better they get!
Ordered a pair of rear shocks, KYB 555601 (Increased Handling/Stability) Gas-A-Just Monotube Info Rear; Mount kit SM526 Sold Separately- the only mount kit I could find is SM5267, so hoping for the best I ordered two kits, one for each shock, the nut barely threads onto the stud more than 2 rotations - if I force the nut to thread any more it will strip the threads, the included instructions are for the front end of the vehicle. Have an issue where I cannot remove the old ones without use of sawzall or grinder due to stud being distorted. Any advice would be appreciated.
@@kybamericascorp I ended up finding two substitute nuts that fit the threads properly. Removing the shocks I torqued the nuts with the studded ends right off they were so old and seized. Thanks for a response.
Can you explain the warranty? Does it have a lifetime warranty? If the ones I bought new Kyb brand from eBay wear out out does replace them I’ve been contacting Ebay seller and they seem to tell me that there’s no warranty.
Your 3rd sentence doesn't make sense as it’s currently written, but I'm gathering that you bought new KYB from eBay and are wondering if you can warranty them through the eBay seller. If so, here's my response. KYB aftermarket products have a "[KYB product] lifetime warranty." Shocks are expected to wear over time, which is their expected "lifetime." Our warranty covers manufacturing defects and things like that, not normal wear from a product in use over time. If you're attempting to warranty used shocks, that's not how it works. The warranty also does not cover parts that are purchased from an unauthorized retailer, like eBay.
@@kybamericascorp that makes sense you guys cover if there is a defect in the product but not a lifetime warranty. How often does defects happen with your product rarely?. I guess as the consumer we gotta make sure before we put the part on that everything‘s good on it.
Recently put KYB on my Lexus and it’s SOOO stiff 😢. It’s now an actual sports suv now (not a good thing for a Lexus type vehicle)… wish they make a -10% less stiff strut and they’ll take over the luxury car shock replacement market.
@@kybamericascorp Hello! It’s a Base 2005 Lexus Rx330 V6 with 176,500 miles on the clock when I installed the new struts. I reused the OE springs and used KYB boots and bump stops. The KYB model numbers are 334400 and 334399. They are the Excel G model.
There's no need to register our parts for a warranty. There's a return process through authorized vendors if you come across an issue. If you'd like a sticker to represent your love of KYB, please email marketing @kyb.com telling us that you'd like some decals and provide your mailing address.
@@adamgoof Our warranty information is available on our website here: www.kyb.com/kyb-product-warranty/ Please contact our customer support department by emailing KYBCS@kyb.com and they can help you figure out your next step.
Great Video, I have a 2019 Ford F350 Crew Cab, Diesel, SRW short bed. Now I pull our camper 5-6 times a year and the factory shocks on the truck work just fine, great ride. Would you recommend the Excel G or the MonoMax? The 5th wheel is 15000 lbs loaded. I still had no issues towing it.
We have recommended factory replacements and monotube upgrades for that model. If you like the way it performed from the factory, then our OE replacements might be what you're looking for. However, we'd recommend plugging your information into our online catalog at kyb.com/catalog because we make many parts for that platform and the various trim levels within it. Feel free to reach out to our tech. dept. if you have follow up questions by emailing techsupport@kyb.com.
You'll have to determine what we offer for your vehicle before you can get to that step by visiting www.kyb.com/catalog. We're all about handling and control, which allows a driver to feel more confident and drive safer in their vehicle. Seems like you appreciate steering response like we do!
Unfortunately, I don't think we can offer any assistance. Since we don't offer that Toyota model in the US or Canada, you'll probably have to contact the KYB company that covers your region.
Unfortunately, I don't think we can offer any assistance. Since we don't offer that Toyota model in the US or Canada, you'll probably have to contact the KYB company that covers your region.
I have a 1995 mustang gt convertible with eibach pro kit springs and bilstein shocks and struts with 130,000 miles on them and it seems the ride is getting firmer-actually,it rides like a lumber truck!!!Which shocks do you recommend?
We'd probably recommend our Excel-G shocks with the Gas-a-just axle damper for your case. Our online catalog at kyb.com/catalog can help you with what we offer for your Mustang if you want to learn more. Our tech support department can also help you if you have any questions. They can be reached by email at TechSupport@kyb.com
This is the account for the KYB aftermarket company in North America. It appears that you might need to contact @kybasianpacificchannel3853 for assistance.
@@Twin_Lakay Cool. Check out our online catalog to see what we offer for your vehicle at kyb.com/catalog. We also have a where to purchase section on the site that should help you decide how to buy them.
That might be a question for @kybeurope. This is account is for KYB Americas, and we don’t offer springs unless they’re part of a Strut-Plus or Truck-Plus complete assembly.
We'd recommend finding out what products we make for your vehicle by visiting our online catalog at www.kyb.com/catalog. Once you establish what part numbers you're looking for, you can then click the, "Where to Buy" link. Our Recommended OEM Replacement Excel-G and Strut-Plus products will closely match the original units. We advise getting new springs and mounts, which our Strut-Plus complete assemblies come with, to ensure the ride and handling is consistent.
I put the gas adjust on my 2005 Ram truck. The difference was night and day. It rides great now. Dodge trucks are heavy in the front. These shocks are great. And the price was n’t bad either. I will always buy KYB shocks from here on out.
I agree I just put a set on the front of my 03 ram 2500 Cummins what a huge difference, especially on the Pennsylvania roads I’m gonna throw another set in the rear
I have a Nissan Sentra 2010, I will order a complete package (rear and front). I had many searches but there were a lot of useless Chinese products that occupied the market, I support KYB as an American brand that is reliable. no matter what the price only the best-quality American-made product.
I have stock rims (in good condition) with with nice new tires, and completely changed the ride in a negative way, definitely more oversteer in the corners and a lot more skuttle shake, I would recommend marketing the excel g shocks as a cheap replacement, I immediately put my 17 yr old bilstien’s back on, they enhanced the stability and control immensely, I will try some new bilstiens and report back with a comparison, I’m just to disappointed to even try buying the KYB upgrade
@@hudsonward7451 We'd be curious to find out more about what your vehicle year, make, model and trim level is, along with which KYB part numbers you purchased, and if they were installed correctly. If you want to talk with some knowledgeable members of our team, please reach out by emailing TechSupport@kyb.com
This is a good, informative video.... Although homeboy with the blue shirt looks a little creepy pushing that piston up and down while staring at the screen...
I put some kyb on the front of my car over 8yrs ago and went for a test drive and fell in love with how the car handled i couldn't even get the front to move, it was so stiff and smooth at the same time, when my cousin felt how the car handled he got jealous and went to buy some for his car too because we had the same car
If only u guys make monotube shocks for economy vehicles as well. Like for example 2008-2015 Scion xB and 2011-2016 Scion tC. More for better handling, better ride control and more fun to drive. We love to have our basic cars more fun then ever. I wish ya’ll make monotube shocks for economy vehicles. Regardless if it’s a demand or not.
U guys should reconsidered making KYB - Gas-A-Just monotube shocks for all vehicles. Especially wether when u guys use to make and then stop offering and u offer just excel G shocks and struts. Or they don’t give them better options instead of just one. Such as Toyota Corolla, Toyota Camry, Toyota Sienna, Toyota rav4, Toyota Avalon, Lexus ES models, Lexus LS models, Lexus IS models, Lexus IS models, Lexus NX models. And even all Scion models. Such as Scion xA 2003-2006 Scion xB 2003-2006 Scion tC 2005-2010 2008-2015 Scion xB 2011-2016 Scion tC Regardless if it’s demand or not a demand. I would love to have Monotube shocks for economy vehicles. Make it more fun to drive. And make it an amazing quality made shocks and struts by u guys ❤️🔥❤️🔥❤️🔥🤌🏼🤌🏼🤌🏼