Hi I found your video helpful even I am not using cricket, I have Vulcan 3 the 500mm and I want to ask a question about adjusting the FP without changing original spring, is it possible to loose the retainer a little bit? Which will give less stress on the original spring?
Congratulations on the channel. Some questions to help me out. Is this system the same as the one in the Cricket 2 WSA? Can I increase the regulator pressure just by opening that Teflon seat very, very slightly without needing to adjust the regulator plates? Thank you 🙏🏻
Muchas gracias amigo,solucione este problema, gracias a tu conocimiento que no has regalado,muchas gracias de parte de un mexicano, saludos 👋hasta donde te encuentras de parte de un mexicano🇲🇽
Now I understand why my cricket leaks air through the regulator and I haven't been able to go hunting for pigeons for 1 year. I think I need to put new o rings on it🤔,thank you very much bro.
Any chancenof doing a video like this for the boss owners... we have been left out when it comes to these types of videos... I'd like to know exactly what I'm doing to adjust and repair my regulator.. and gun
Excellent video. Congratulations. A question, WHAT is the best regulator value for a cricket tactical II 60 in .22 caliber for 50 meters? Thank you so much.
Help i had my hunter compact apart cleaning it up. Put it all back together and had a huge poi shift. Probably should of market the position before removing the sleeve. Any advice ? Was thinking spinning the liner in 1/4’s and seeing if it shoots close to where it was ?
Hi Ernest, I'm having trouble with a leak from the first hole from the valve assembly low pressure side I have used 2 lots of o rings with the same result leak from first hole from the rear is ther any thing else I could be missing other than o ring 8 thanks for any help
Greetings from France Sir. If you come back arround here, just a quick question. My Cricket (carabine model but same mechanic I guess) has got a sudden loss of power. When I got it, it was shooting between 260 & 263 m/s. Now, it's only between 220 & 223 m/s. Any idea where the missing 40 metters per second are gone ? I can't hear any leaking. I was thinking about a problem with the regulator but well, the shots are well regulated, just like before when it was shooting at 260. Just, now, it's regulated between 220 & 223 instead of 260 & 263... I'm not sure what's happening. Your thoughts would be appreciated. Thank you !
Hi I’m wondering if anyone can help please my .22 crown mk2 after a service of the regulator isn’t showing any pressure on the gauge I have done a few services on my 2 crowns and I’m stumped I did seem to have a blow back from the side vent but it all seems fine when I took it out to check there’s no leaks whatsoever 🤔
Ok. A minha vaza no buraco abaixo da válvula, eh uma válvula huma aonde pode ser o problema. Na verdade o cilindro está en Zero ar y não enche já sai direto o ar ali no buraco abaixo da um.
Hi Ernest! Love your film. Could you please make a film about how to install o-ring C39 into the Crown mk1 house fot the tegulator? I have very hard to install it. Best Regards Rolf
After removing my gen 1 crown regulator and replacing the adjustment screw and piston. I still have about a 10 bar leak overnight. The culprit should be the oring at the bottom of adjustment screw. But it’s new. I took a close look inside the regulator body where that oring seats. And find tiny scratches in the body. I’m now attempting to polish them out with metal polish liquid and a q tip on a drill. Just remove some of the cotton till a get a semi firm fit. This maybe why some new crowns have creep from the factory.
Sir , i m from India and I have fxcrown.22 mk1 and regulator is already set at 150 bar but i want to know how many time tighten my power wheel spring for good fps and smooth functioning. Please reply i m waiting 🙏🙏 I have not chrony 😭. Please give Idea/approximate no. Of Crank to power wheel spring
Hoi Ernest, happy New Year! Can you do the dismantling of the cricket II? I want to install a Huma Air regulator but can't find a manual! thanks in advance
@@nixosnixos1227 No and because I can't find a manual and the kricket is still under warranty I'm going to wait until after the warranty period! Then I will order the regulator from huma-air and give it a try.
@pfv3462 thanks for taking the time to answer. My cricket is no longer under warranty (original cricket) I have purchased the regulator but they don't have on the website any instructions regarding cricket (they have for a bunch of other brands). I emailed them about this issue and I'm still waiting for an answer. Also tomorrow I'm going to buy a 27mm socket and grind it to be able to dismantle the gauge. I have a leak from the gauge side.
I got an answer Dear Nixos, It will directly replace the mounted regulator. So diassemble the gun, remove factory regulator, install ours. That is all there is to it. For disassembly we would like to point you to the factory exploded diagram. All the best
Hi How do you remove the stainless adapter from the tube? it feels glued on my M3. I need to remove it as the seal inside it came out with the other 3 o rings :(.
The 8x1 o ring that you don't have a tool for. How and where exactly does it go in? My impact is missing that o ring and I'm trying to figure out how to put it in. Mine is a .25 so its a 9x1
@@jp8351 unscrew the shroud by grabbing it with your hands and spin it off.. use a crescent wrench or box end wrench to unscrew the threaded part in the end of the barrel. Then remove the Allen headed set screw at the back of the barrel where is slides into the block. Then pull on the barrel and it will slide out. Then you will have to unscrew the barrel sleeve from the barrel inlet/brass fitting.
got the stainless part and the tube undone. Used a micro welding torch (dremel versatip) went super fast and easy :). also found a easy way to clamp that part in a vise without scratching it, I use some aluminum foil wrapped fairly thick around the stainless/brass part. zero scratched :)
