FX Crown Hammer weight Mod 

I just wanted to say “welcome back”! It’s good to see you posting a video

Nice to see mods for the crown keep them coming

Thank you! Now.. we buy these where? LOL

Just loved it, thank you very very much.

Looking forward to installing this mod. Thank you.

This hammer mod makes a huge difference. 9 grams is ok will do quiet a bit. But if you want full potential from your crown like firing 25gr - 27gr - 30gr slugs in .22 at 940-970fps then you would need a 12 - 12.5gram hammer weight. This would make 21gr slugs fire around 1050-1100 fps.

Very nice. This will be very nice with the slug barrels. You made these parts ?

Longitud time... we miss you

Do you make these parts on the side ? I'm interested. How was the hurricane ? I grew up near jacksonville.

Anything I can do to get my dreamline 30 cal above 840 reg is already at 150 160. And everybody talks about maxing out the hammer spring when it's on max power but when I do it my gun actually shoots slower when is more tension on the Spring

I installed the mod and I am only seeing minimal increases in velocity. Please advise. Thank you.

U know the valve stem holder on the new style dreamline , they come in 2 versions the sub12 and full power versions , I have tested with both and both now have a dent in from where the valve is hitting it (looks like to much travel on the rod I have the added .25&.30 cal hammer weight), looks like it’s gonna come though the valve holder itself , have u heard of this befor or seen this ? , these dents occurred with just a few test dry fire shots after installing the new type rod holder system with no air !!! , Thanks

Hi there. Where can i purchase this please.? Thanks

@ ernest How i can do i cant put the part that is on hammer is more big

You don't have a camera treepod?

Why can I not find this hammer anywhere?

Where do you get thissss

Can i get a complete power kit for fx crown off you ?. Cheers ian merrick

Theres no way that weight is only 90 grains .. did you mean 90 grams?

This is almost a royale block ! the royale has the same hammer ! Only quest is : Have you check so the hammer don't hit the seat round the valve? Not fun when ithappens and the valvepin is stuck in the seat!

do you make these to sell if so message me please

question here is why?

Sir , i m from India and I have fxcrown.22 mk1 and regulator is already set at 150 bar but i want to know how many time tighten my power wheel spring for good fps and smooth functioning. Please reply i m waiting 🙏🙏 I have not chrony 😭. Please give Idea/approximate no. Of Crank to power wheel spring