Thank you so much for making this video! I got the programs installed but run into an error when trying to open WINKFP. Codes are 1020, 1040, 3017, and 996005. I sent you a DM on Instagram with a screenshot. Trying to get the GTS DCT tune on my E92 M3. Thanks in advance!
EXCELLENT. {NOTHING MORE NEEDS TO BE SAID ABOUT THIS VIDEO but the BimmerGeek version does have issues with E53 X5 and libraries may be damaged. I have not had time to verify this statement. Will update when I have a solution or proof.)
Hello friend, I do everything step by step and finish up to step number 10. But the bmw icon does not appear. and I can't place it on the desktop. I'm doing it with your video on one computer and the whole setup on another laptop. I have gone step by step, I even copied the instructions or commands from your text file with the instructions, I verified each of the letters or characters and I can't get the BMW icon where the extracted files are. What I can do ????
My FRM module was repaired by a tech guy, probably he does not paired with CAS and my car now does not start, how would i know if there is issue in the FRM module?
i keep getting IFH-0010 error datatransmission to controll disturbed. i keep looking stuff up and solving this but nothing works, also ,error#95 sys0005 object file not found
Hokey CRAP! No one ever said anything in the whole set up when I've tried it the &898 thousand time before about running it in Windows 7 compatibility mode. Which makes sense because why would anyone make a version that actually just loads into the world largest windows version?? LOL. Anyway thank you very much for this video!
110% the best friggin video for this, everybody else that I've tried to follow was so discombobulated that I couldn't get anything to work. Step by step instructions were super clear, I got it working in like 15 minutes where the past two nights I couldn't get the bloody thing to work.
Omg Great video. But i do everything cant find 1 thing. and thats the Port of cable option. Its not visible in my setting. I put te cable in the usb than its installed byself but the port cant find pls help
Massive props to you for making this! First timer with INPA, diagnosing a misfire/injector issue that only happens when vehicle is warm. Just replaced all ignition coils with Eldor so I know it's not that. Car starts normally too. Only starts hesitating when warm and under load. So this is a major help!
hopefully you're still on here. i installed this on my windows 10 laptop. install went flawlessly, but the problem i'm having now is that inpa will detect the cable, but says ignition is off even if the ignition is on or if the car is turned on.
Thank you very much for making this video in a way that simple & easy to understand. I have a 2007 BMW 328i & I’m trying to work on it myself after my 2016 VW Passat was totaled. However , after I let it sit for abt 6 months, with no battery power, the steering column locked up & I was told to get the cable, software & use my laptop to unlock it just to get the engine to turnover. (Push to start). If you have any important advice besides o not brick my Bimmer, I’d appreciate it! Again thanks for the video, you’re awesome!!!
Hello I installed everything as instructed but for some reason I can’t edit the settings in the INPA cable any hints? It hasn’t installed the driver on my computer but my computer is fully up to date
@@jackson95tattoos yea I did, I ended up going back into the file I unzipped and rereading the introduction PDFs and I missed something. The instruction PDFs are the key read them all and follow them.
Nothing seemed to happen when I plugged in my cable but it does come up as a USB device and I did change it to COM1. It should work then no? Also the push switch: which position is K and which is D?
New to this. All I want to do is cycle the ABS pump to do a complete brake fluid flush. I think I can basically bleed the brakes then do again while cycling the ABS pump. I have an e92 M3. Will this software work for that?
for some reason everything works but inpa, ncs expert, and wink kfp did i do something wrong? i get the messege " the code execution proceed becuse api32.dll was not found." what do i need to do to fix this?
I followed your video and installed the software smoothly. However, when my cable was plugged in at USB port, it was not shown in the Device Manager as "Port & COM". Instead, it showed "Other Devices" for which I cannot change port settings. Any comments on that? I work with Windows 10 pro. Thank you.
It may be due to your use of the Pro version of Windows. We used the regular version. Contact BimmerGeeks and see if they have any other drivers you can try.
@@cyclevin159 hi it works fine, after installing the software first. It took some days before I received the carble. I now understand the diagnostic area but the coding and programming is my problem.
