Great video! Just to offer a suggestion…..always after removing the coils and before pulling the spark plugs use compressed air to blow dust dirt and debris out of the spark plug holes.
I kinda liked the 2 screws to mount..lower window to adjust...no one counts the pollution caused by junking cars that cant be fixed economically a dealer would gouge you 600 bucks to fo that..i bet thr mirror would cost 250
Just want to say. You did a great job explaining and providing key information . The T-30 bit called out Noting it was a capture bolt The use of a cable tie - was a simple solution I have my part - thanks for the short explanation A+ For you .
Just finished 2 adds I found masons twine worked better for me for the loop. Also in my case the retainer bolt wouldn’t go back in until I figured out that I needed to pull the plastic assembly out more . It apparently had gotten bushed inward . After I figured that out everything worked perfectly. Thanks again.
if its electronic throttle pedal you don't give it gas when starting. I got mine directly from the factory (2000) tho and it had a note on the steering wheel not to press the accelerator while starting. Any vehicle if you turn it over repeatedly like that its going to have trouble starting.
Since it's your daughters car and 7 kids... All i can say is... THANK YOU DADDA 🙏🙏💛🙏🙏 this video helped i almost wanna pay you for mines and your daughter with all the respect in the world
I have a 2004 Isuzu Rodeo and I put oxygen sensors cause of the engine light was on. Engine light is off now but my gear box won't go in park or reverse now.
I have a 94 model Isuzu rodeo. It's running really bad. It's not idiling very good. At2000; RPMs it starts to spit and sputter,and has no power. Now then if I turn it off and on real fast while it's running it seems to reset something and then it will run fine. It still has the idiling problem of up and down missing really bad. What can I do to fix the problem
how can I get in contact with this junk yard. I need the parts from the station wagon it look like 1983 - 1991 ford Crown Vic LTD Country Squire or a Grand Marquie. I take parts or the whole car.
I have the 2000 Holden Frontera here in Aus, its the same 6VD1 engine. If you look inside the intake manifold there behind the throttle plate there is a small tube for the EGR valve. I usually put a 2mm steel rope in the drill and run it up the pipe to clear out all the carbon. This becomes blocked on mine about every 20,000-30,000km. Note that the EGR can become clogged and not produce a code or MIL. Mine was clogged for years and there was no code or check engine light.
I am curious if these mirrors would work as a replacement for a 2004-6 GTO as well? They look nearly identical at the mounts and the trim profile looks very very similar although the glass is definitely a different form/mold. So I went ahead and bought a NOS from rockauto that was a 1 day deal and cheap(21 bucks) and a mirror alone for a GOAT is getting harder and harder to find except for junkyards(where are you on this Dorman?!?!), and then its color matching etc issues to be addressed, I started closely inspecting as many GM cars same era as the GTO(even though it is an orignal Holden VSP manufactured car out of Australia, there are a lot of things that are homogenized for these cars.) Anywho, long story short, anybody have any knowledge of what I am about to try out? Thanks in advance👍👍 (oh and yes I did check cross reference and GTO only crosses to GTO's, I am leary of that though for 2 reasons...first off, the GTO was originally only produced for Australian markets and even though its a GM/ Holden produced model, maybe they shared blueprints for certain parts but they never made it into the parts catalog... 2nd, I can clearly imagine an exec from Holden and GM butting heads over production of OEM parts and Holden fighting to retain patents and copyrights in Australia and resisting any attempts at sharing part specs with any manufacturer including GM and probably Dorman too hence the reason even the mirror glass is hard to find)
A agree, I had the TP-XL I tried from the TP4B and it was a bit tippy because the base width to depth ratio was a bit off. I think the TP-LC with the outside pockets is a much better bag.
@@TheSacrificedTV in all my years with These 2nd Gen Rodeos I’ve always heard ONLY use the DEX 3 in the blue bottle and specifically non synthetic. Why, I’m not sure but it’s all over Isuzu forums.
