I have a Felicity 5kva hybrid inverter and a blue carbon 15kwh lithium ion battery, there's no communication between both of them and there's no communication port on the battery. Can both of them communicate without the battery having a communication port? Thank you.
Hie I have a Highbrid 12v sumry inverter and I have problem with charging I have just put a lithium 12v batree and a 450w panel It charged the whole day today but it's flicking code[04] fault and the batree has just dropped to 10.2v by 6pm from 12.9v and i don't know the problem I'm actually off grid 100% Pliz help
I’m having issues with my felicity inverter 24v 5kva the fan does go off it’s always on what could be the issue or is it suppose to be on forever. Or is it because the charger controller and inverter are parallel?
e.g you having 220ah/12v 1. for 10kwh = 10000wh but E= Ix V x H here I=220a, V=12v therefore, ?wh = 220 x 12 x h = 2640wh to get 10000wh depend on your voltage e.g for 12v/220ah battery x 1 you will divide 10000wh/2640wh = 3.7878, this means you will have more than one battery to get 10000wh. in case of 10000wh you will need averagely 3.8 x 220ah/12v battery. but you can not get 3.8 quantity of battery we will go for 4 battery. therefore, 4 x 220ah/12v battery will give you 10560wh of power. NOTE: Your battery can be connected in series or parallel this will still give you 10560wh of power with four battery.
Please I have a problem with time switching when the grid power goes off, the output cut off for 8 seconds, so If I make an update for the software, will the problem disappear ?!
This product is very good the design is exceptional I just installed one last week, but I am having issues with the transfer mode where there is power failure it doesn't switch immediately as UPS but switching back to utility there is no problem. I don't know if that is how they design it or is a factory issue