Tweaking and shooting airguns. Motorbikes, Heavy equipment & farming. From heavy equipment repair&maintenance to repairing kids toys. www.youtube.com/@paavokaleva?sub_confirmation=1
If You look to "Community" tab at my channel page, then there is a post about groups at 33yards (30 meters) of 13.34gr JSB KO slugs. Not documented 50m groups are about the same size.
Hi Paavo, I see you fitted a Keihin FCRMX41 to your TE610, did this carb fit straight on or did you have to modify anything to make it fit? As the space under the frame is pretty limited & there is the issue of the rubber right angle link pipe to the air box, how did you get round all these? I'm looking at trying to put another carb on mine asap as I need it to get to work so was also looking at a Keihin PWK40 as a quick solution, would you know if that model would fit straight on to replace my broken Del'Orto PHM40MS? & are they any good? If you have any info it would be greatly appreciated. All the best JB
Hi JB! I have a google photos gallery of my TE610E project, scroll through it and towards the end there are some pictures of that Keihin in the bike. But long story short - it fitted almost with no modification. The airbox side of the carb was a bit bigger in outside diameter, but fitted. Most modification is needed with gas tank (little tank, not the big oversized tank, I switched back to small tank with that Keihin. Did not want to mess with that rare oversized OEM tank). Keihin FCR is wider at the top and choke is on the left side of the carb (black knob - choke, red knob hot start knob, never used that). You need to heat the underside of the tank with heat gun and make room for carb. Sounds like big hassle but performance of the bike (if right jetting) is snappier, more power, better carb response. So, in my mind it was worth it. Link to photo gallery: photos.google.com/album/AF1QipNrxck72hYm1p_zzxp_MlH8R14cmYKI-MuA0Uml
Seeing these makes me recall my grand-dad. Grew up with him as a child and he would take me out hunting using those type of rifles. Always love to feel a freshly refuled canister since they would cool my hands on a hot day.
@@paavokaleva SIR THIS IS THE PART NUMBER FOR THE FX BOTTLE ADAPTER LONG FX20128. WHICH IS USED ON THE DREAMLINE POWER PUP BOTTLE. MAY HELP MY FRIEND 🎯✌🏼🤩
Did that last spring (~200km ago), gaps are in spec. Timing chain, chain tensioner and chain slides are replaced maybe 700km ago. More like a carb tuning issue.
@@paavokaleva I ordered the the power plenum from a fx maverick and it has a small hole for the atmospheric pressure. Even in the description of the part it says people are using them for the dreamline plenum..
@@MichiganAirgunner I looked at my Dreamline and found that little hole in the plenum. That hole is at the threaded part of the plenum. If air leaks out from it then O-ring between main block and plenum is not sealing good enough. O-ring mentioned is part number 16 on parts diagram --> fxairguns.com/wp-content/uploads/2022/01/F10057-3-ENG.pdf
I picked up a 2003 TE610E with weak spark. It had the flywheel replaced and stator rewound. Ended up putting on DC CDI from a Chinese pit bike. And she fired straight up. Looks like the rewound stator was bad.
Europe Airguns web store have them and Krale web shop also has it. Europe Airguns even have left hand stock. I believe that they offer international shipping also.
Зачем оператор так мучается нельзя сразу установить ножи для колки дров на 8 и более частей а, а то к концу дня спина отвалится столько перекладывать дрова
compared to the FX Dreamline, do you recommend this one over it? (living in a country where such compromise is imposed; No more than one airgun for same owner)
Hi, KRAiT has same tuning capability as Dreamline. But if You want to change caliber then it is easier to do it with Dreamline. Dreamline also has option to built it into another form - tactical, classic, bullpup, lite, GRS (classic with another riflestock). But what I really like about KRAiT is barrel - CZ accuracy! No messing around with different barrel liners like in FX. If I had to choose only one airgun between KRAiT and Dreamline, I would go with the KRAiT.
@@paavokaleva thanks a lot for your feedback ,I really appreciate it 🙏 I'm also a huge admirer of the work you've done with the dual reg Dreamline , I enjoy watching the great work you did,well done!
Greeting from Sweden! This should work for my S40 2004 too right? I took out my 6CD changer and it had the model no. CD-CP1. I looked it up on lasertrader and the changer it finds lists both the CD-CP1 and the CD-CP28 which should mean that we use the same changer right? So it should theoretically work if i just follow your guide? My changer is just permanently stuck, it spit out 2 discs at once and one of those thin metal circular thingies that is on the inside in between the discs. I need it to work for at least 1 CD permanently just to be able to install a certain CD to AUX mod.
It’s not compact it’s L version. In video You see me installing that shorter version of Arca rail. But on thumbnail and at the end of the video You see picture of the gun with longer version of Arca rail.
This exact gun is with choked barrel. Before I bought this gun I asked from AirMaks arms about barrels and they said that ALL .177cal barrels are choked. In bigger caliber HighPower (HP) guns have unchoked barrels. It is good to ask retailer about barrel, or ask for unchoked barrel, before You buy one.
Yes, Maverick 89cc plenum. Here You can see more Maverick parts mixed with Dreamline parts: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LvQu-XnOco0.html
